Engine Auxiliary Components - Heavy Equipment Parts

Rubber Mounting 1487116 for HAMM Road Rollers – Vibration-Dampening Replacement

Stop vibration-related downtime and extend your HAMM roller’s service life with the genuine-spec Rubber Mounting 1487116 for HAMM Road Rollers – Vibration Dampening. Engineered to absorb high-frequency chassis resonance, this mount eliminates premature wear on adjacent hydraulic lines and control linkages — a common failure point on HD90, 3520, and DV-series machines under heavy compaction cycles. Fits 30+ HAMM models including HD90, 3520HT, DV+90i, H11ixP, and HD+110i — no guesswork needed Made with dual-durometer natural rubber compound (Shore A 55/75) for progressive load response and thermal stability Direct OEM-equivalent replacement: same bolt pattern, compression travel, and shear modulus as original 1487116 MOQ 1 piece — shipped same day from Guangzhou warehouse when ordered before 3 PM CST

In Stock · MOQ 1 pc

View Details

Alternator 27060-UB050 for Toyota 4Y forklifts – direct OEM replacement

Get back to full forklift uptime fast — this 27060-UB050 alternator delivers stable, OEM-matched charging output so your Toyota 4Y forklifts won’t stall mid-shift or drain batteries overnight. Direct-fit replacement for 20+ Toyota models including 02-8FGF30, 32-8FGN25, and 8FGCU30 — no wiring mods or bracket hacks needed Built with high-temp rotor windings and sealed NSK bearings (not generic Chinese units) — critical for forklift duty cycles with frequent stop-start loads Pre-tested at 14.2V @ 85°C load to match OEM spec — eliminates the “voltage drop under lift-load” issue that kills sensitive CAN bus instrumentation Ships from Guangzhou warehouse same day if ordered before 3 PM CST — no waiting weeks for OEM backorders

In Stock · MOQ 1 pc

View Details

12V fuel cut-off solenoid for DPA/DPS/CAV/Lucas engines – OEM replacement

Stop unexpected engine run-ons and get reliable, instant fuel shut-off every time — this 12V fuel solenoid delivers OEM-equivalent response and durability for vintage DPA, DPS, CAV, and Lucas diesel injection systems. Built to replace 7167-620B and 9009-049 units, it eliminates the guesswork and downtime caused by weak or counterfeit solenoids. Direct-fit replacement with correct plunger stroke length and magnetic pull force — critical for proper pump timing alignment ISO-certified coil winding and copper-clad steel armature for consistent 12V activation, even in low-battery or high-vibration conditions Ships from our Guangzhou warehouse in 2–5 working days — no waiting weeks for OEM backorders Backed by XUNPO’s 6-month warranty and technical verification support before you order

In Stock · MOQ 1 pc

View Details

12V Starter Motor 25-098-11 for Kohler CH/CV Engines – Direct Replacement

Get your Kohler-powered equipment back online fast — no more downtime waiting for OEM delays or risking counterfeit starters that fail mid-job. This 12V starter motor 25-098-11 delivers OEM-equivalent torque and engagement reliability, tested to fire up CH and CV series engines consistently, even in tough field conditions. CCW rotation with precisely 10 hardened gear teeth — critical for proper meshing with Kohler’s unique flywheel pitch on CH620 and CV624 models Fits CH12.5–CH1000 & CV12.5–CV730 engines — verified against factory service specs, not just part number matching 0.8 kW output rated for continuous-duty cycling — ideal for rental fleets and service centers doing repeated engine swaps Ships same-day from our Guangzhou warehouse when ordered before 3 PM CST — no MOQ, no wait

In Stock · MOQ 1 pc

View Details

12V Trombetta P610-B1V12 pull solenoid for engine fuel shutoff in excavators and loaders

Stop unexpected engine shutdowns and get reliable fuel shutoff every time — this fuel shut off solenoid delivers OEM-equivalent performance at a fraction of the cost. Built to replace Trombetta P610-B1V12 units in excavators, loaders, and other heavy equipment, it eliminates the downtime caused by weak pull force or inconsistent engagement. True 12V pull-type action with dual return springs — critical for fast, positive fuel cutoff under high-vibration conditions Fits CAT, Komatsu, Volvo, Hyundai, and other major brands without modification Tested to 500,000+ cycles — far exceeding typical aftermarket solenoids that fail after 100K–200K In-stock in our Guangzhou warehouse: ship same day on orders placed before 3 PM CST

In Stock · MOQ 1 pc

View Details

12V Starter Motor 6676957/6685190 for Kubota V2203/V3300 & Bobcat Skid Steers

Get your Kubota V2203/V3300 or Bobcat skid steer back online fast — no more downtime waiting for OEM delays or risking counterfeit starters that fail mid-shift. This 12V starter motor delivers OEM-equivalent cranking torque (2.7 kW) with precise CW rotation and the critical 11-spline pinion OD of 40.2mm — a detail that ensures proper meshing and prevents gear chatter or premature wear. Fits 50+ Bobcat models including S750, T770, A770, and V417 — plus all major Kubota V2203/V3300 variants (V2203EB, V3300DI, etc.) Direct replacement for part numbers 6676957 and 6685190 — verified against Valeo, Kubota, and Bobcat OEM specs Unthreaded 11.7mm mounting holes match original flange geometry — no drilling, grinding, or adapter plates needed Ships from Guangzhou warehouse in 2–5 working days, MOQ just 1 piece — ideal for urgent field repairs

In Stock · MOQ 1 pc

View Details

Stop Solenoid 1502-12A2U1B2 for Woodward 12V Engine Shutdown Control

Stop unexpected engine downtime with the stop solenoid 1502-12A2U1B2 — a direct-fit, OEM-equivalent replacement that delivers instant, reliable 12V shutdown control for Woodward engines. No more waiting weeks for OEM parts or risking counterfeit failures that cost hours of labor and lost revenue. Verified drop-in fit for Woodward 1502 and 1500-series governors — including correct plunger stroke depth and coil impedance (12.8Ω ±5%) Pre-tested for continuous duty cycle at 12V DC — handles repeated actuation without thermal lockup Ships same day from our Guangzhou warehouse — no MOQ, no wait, even for single-unit urgent repairs Backed by XUNPO’s 6-month warranty against manufacturing defects and 24/7 technical support from engineers who’ve serviced Woodward systems for over a decade

In Stock · MOQ 1 pc

View Details

12V 65A Perkins alternator 2871A306 for 1004/1006/1103/1104 engines

Stop unexpected downtime and costly repairs caused by failing alternators on your Perkins-powered equipment — this 12V 65A Perkins alternator delivers OEM-matched output and brushless rotor durability for consistent, long-cycle performance across high-hour 1004/1006/1103/1104 engines. Direct-fit replacement for 2871A306 — no wiring mods or bracket adjustments needed Covers 22+ Perkins engine variants including 1103D-33TA and 1104C-E44T — verified with correct internal voltage regulator spec (VR-25) for stable 13.8–14.4V charging under load Ships from Guangzhou warehouse same day — no waiting weeks for OEM backorders Backed by 6-month warranty and real-time technical support from our Perkins-certified team

In Stock · MOQ 1 pc

View Details

Shock Absorber Rubber Vibration Mount for Dynapac CA51–CA702 Compaction Equipment

Stop compaction equipment downtime caused by cracked, hardened, or misaligned vibration mounts — this Dynapac vibration mount delivers OEM-equivalent damping performance and long-cycle fatigue resistance right out of the box. Built with high-durometer natural rubber compound (Shore A 65±3) and precision-molded bonded steel sleeves, it maintains consistent isolation across temperature swings and heavy-duty pass cycles. Direct-fit replacement for Dynapac CA51–CA702 & SCA-series rollers — no drilling, shimming, or torque guesswork Part numbers 358172 / 4700358172 verified against original service manuals and physical sample benchmarks Warehouse-ready: ships same day from Guangzhou if ordered before 3 PM CST Backed by XUNPO’s 6-month warranty against material or bonding failure — not just defects

In Stock · MOQ 1 pc

View Details

Vibration Mount 91-2281 for Yanmar 3.95 Engine – Thermo King TS/KD/MD/RD/TD Series

Stop unexpected shutdowns and costly refrigeration unit downtime—this 91-2281 vibration mount delivers OEM-equivalent isolation for Yanmar 3.95 engines in Thermo King TS200, KD2, MD2, and RD2 units. Built with high-damping natural rubber and precision-molded steel inserts, it absorbs torsional shock *and* axial vibration—critical for preventing cracked engine mounts and misaligned compressor couplings on high-cycle transport refrigeration systems. Fits Yanmar TK3.95, 3.95, and 395 engines—verified against original Thermo King mounting geometry Cross-references 91-7967, TB-37-91-2281, 1080A17G61, and other legacy part numbers Prevents premature failure of adjacent components (like alternator brackets and fuel lines) caused by resonance buildup In-stock in Guangzhou warehouse—ships in 2–5 working days, MOQ just 1 piece

In Stock · MOQ 1 pc

View Details

12V 11T Starter Motor for Yanmar 3TNV82/3TNV88 – High-Torque Marine & Generator Replacement

Get your Yanmar 3TNV82/3TNV88 engine or Northern Lights NL484 generator cranking reliably—every time—with this high-torque 12V starter motor. No more frustrating no-crank situations caused by weak engagement or inconsistent pinion throw, especially in marine and genset applications where ambient heat and vibration demand precision engineering. Features a true 11T gear with hardened steel spline—critical for proper meshing with Yanmar’s shallow-depth ring gears (a common failure point with generic 10T or soft-tooth replacements) Fits over 60+ Yanmar engine variants—including hard-to-match models like 3TNE84-EIKS, 4JH3-HTZAY, and 3JH3E-YEU—plus NL484/NL488 generators Built to OEM-spec voltage drop tolerance: delivers full 1.4 kW torque even at 10.8V, ensuring cold-start confidence in demanding environments Backed by XUNPO’s 6-month warranty and technical verification—so you’re never guessing whether it’ll fit or function

In Stock · MOQ 1 pc

View Details

12V Alternator 30-00423-00 for Carrier CT2/CT3 Engines & X2 Refrigeration Units

Get back up and running fast—no more downtime waiting for OEM alternators or risking counterfeit parts that fail mid-route. This genuine-spec Carrier alternator 30-00423-00 delivers stable 12V output and precise voltage regulation for Carrier CT2/CT3 engines and X2 refrigeration units, keeping your reefer units cold and compliant on the road. Fits critical models including X2 2500A, Genesis R90, CT2-29TV, and CT3-44TV—verified against OEM pinout, pulley offset, and internal regulator specs Ships same-day from our Guangzhou warehouse (MOQ just 1 piece), so urgent replacements arrive in 2–5 working days—not weeks Built with high-temp brushless rotor windings and dual-bearing design to handle continuous 210°C underhood heat in transport refrigeration applications Backed by 6-month warranty and full technical support—because misfit alternators don’t just underperform, they fry ECUs

In Stock · MOQ 1 pc

View Details