Belts 7 - Heavy Equipment Parts | XUNPO Global Distribution

V Belt 1G062-97012 for Kubota 05 Series – Scheduled Maintenance

V-Belt 1G062-97012 (cross-reference only), High-Tensile Rubber with Polyester Cord — replacement for Kubota 05 Series engines D905 through V1505 across F2560, B7510, ZD1511 and related tractors and mowers. Replace during scheduled cooling-system service; inspect tensioner and pulleys at the same interval to avoid repeat downtime Thermal cycling and edge cracking signal wear before catastrophic snap — plan stocking by fleet duty hours Scheduled maintenance intervals and replacement guidance ship with every order for long-term fleet planning.

In Stock · MOQ 1 pc

View Details

Main Pump Drive Belt 6667322 for Bobcat S175 – Service Part

6667322 Main Pump Drive Belt, 3-groove cogged EPDM — replacement for Bobcat S130, S150, S160, S175, S185, S205, T140, T180, and T190 skid steer and compact track loaders. Watch for edge cracking, glazing, or tension loss as signs the belt is nearing end of service — replacing on schedule avoids hydraulic pressure drops and unplanned machine downtime. EPDM compound with fiber-loaded backing handles sustained heat in hydraulic compartments, while ±0.3 mm dimensional tolerance ensures drop-in fitment without pulley realignment. Recommended replacement intervals and fleet stocking guidance included with every shipment.

In Stock · MOQ 1 pc

View Details

Wear Item Ribbed V-Belt 01184002 04131488 Compatible with Deutz

01184002 04131488 Ribbed V-Belt, 6-Rib PK Type, EPDM Compound — replacement for Deutz D 2.9 L4, TD 2.9 L4, TCD 2.9 L4 and TCD 2.2 L3 engines in construction and quarry duty. Typical wear signs include rib cracking, glazing and tension loss under sustained high-temperature operation; scheduling replacement before failure avoids cascading damage to alternator, fan and compressor. Forward stocking recommended at fleet level given predictable consumption rates across service cycles. Replacement interval guidance and batch inspection records included with every shipment.

In Stock · MOQ 1 pc

View Details

Drive Belt 154537-001 for Vermeer BC600XL – Service Part

Drive Belt 154537-001 (cross-reference) for Vermeer BC600XL, Aramid cord, EPDM compound — this belt transmits power from engine to rotor assembly on BC600XL brush chippers, where surface cracking, glazing, or tension loss signals approaching end-of-service. Replacing on schedule protects pulleys and rotor bearings from secondary wear. Aramid-reinforced construction sustains performance through dusty, high-moisture forestry and land-clearing cycles. Replacement interval guidance ships with your order for fleet planning confidence

In Stock · MOQ 1 pc

View Details

Belt Set 50-00178-16 50-00162-25 50-00178-27 | Service Part for Carrier X4 7300 7500

Belt Set 50-00178-16, 50-00162-25, 50-00178-27 — 3-belt drive set, 8mm tooth pitch, EPDM with aramid reinforcement for Carrier X4 7300 and 7500 units. Replacing all three belts together at scheduled intervals prevents uneven load sharing and cascading drive failures. Cracking, glazing, or tension loss signals replacement is due before hydraulic or cooling system damage occurs. EPDM compound resists heat, ozone, and oil under continuous variable-load duty. Replacement interval guidance included with shipment to support fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

V Belt Fan Belt 080109107 for Perkins 404C-22 – Fleet Supply

080109107 V Belt Fan Belt, EPDM Compound with Polyester Tensile Cords — replacement for Perkins 404C-22, 404C-22T, and 104-22 engines. As a scheduled wear item, replace at signs of edge cracking, glazing, or tension loss to prevent unplanned thermal shutdowns. Inspect pulley grooves and tensioner condition during change to address root cause. Cross-reference 080109107 and T80109107. Fleet operators benefit from stocking ahead to match belt cycles with other planned maintenance intervals Continuous supply supported for older Perkins 404C-series engines approaching end of standard brand support windows Replacement interval guidance and engine serial confirmation provided with each order

In Stock · MOQ 1 pc

View Details

V-Belt 113.21371 for Sears Craftsman Drill Press – Service Part

V-Belt 113.21371 (cross-reference) — 2-piece set, neoprene compound with polyester cord for Sears Craftsman 15 1/2" Drill Press spindle drive. Slippage or glazing signals wear that degrades hole tolerance and RPM consistency before the belt finally fails Scheduled replacement protects spindle accuracy and prevents motor overheating across the machine service life Pair belt swap with pulley and tensioner inspection to keep the full drive system within specification Replacement interval guidance included with shipment for planning your next service window.

In Stock · MOQ 1 pc

View Details

Deck Belt 131-1122 52″ | Overhaul Grade for Toro Grandstand Multi Force

131-1122 Deck Belt, 52" (1321 mm) × 0.5" Width — replacement for Toro Grandstand and Grandstand Multi Force models 74505, 74519, 74529, 79505. EPDM rubber compound with aramid tensile cords resists heat buildup and abrasion from sustained commercial mowing Schedule replacement at service intervals before cracking, glazing, or fraying edges lead to unplanned downtime and pulley damage Cross-reference: 131-1122, 145-3482 Recommended replacement intervals and wear inspection guidance included with shipment for fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

3 Groove Pump Drive Belt 6660994 – Fleet Supply for Bobcat

6660994 3 Groove Pump Drive Belt, 3VX Profile, EPDM + Aramid Fiber — replacement for Bobcat 753, 763, 773, 7753 skid steer loaders. Schedule belt replacement during planned maintenance to avoid unplanned hydraulic downtime and protect pump components from slippage damage Watch for cracking, glazing, or fraying edges as key wear indicators signaling the replacement window Inspect pulley alignment and tensioner spring function during belt service for complete drive system reliability Long-term supply continuity maintained for aging Bobcat skid steer populations across all supported variants.

In Stock · MOQ 1 pc

View Details

V-Belt MIU13962 for Yanmar 3TNV70 John Deere XUV – Fleet Supply

MIU13962 V-Belt (cross-reference), 13 mm × 8 mm EPDM cross-section — replacement for Yanmar 3TNV70 and John Deere Gator XUV series utility vehicles. Replace at scheduled service intervals or when cracking, glazing, or fraying edges appear on the belt surface EPDM compound rated to 150°C suits compact engine bays under sustained heavy-duty operation One SKU covers multiple Gator variants and the Yanmar 3TNV70 platform, simplifying fleet inventory Replacement cycle guidance included with every shipment to support your preventive maintenance planning.

In Stock · MOQ 1 pc

View Details

54″ Deck V-Belt 130-0843 for Toro TimeCutter – Service Part

130-0843 V-Belt, A-Section Deck Belt for Toro TimeCutter — replacement for Toro & Exmark zero-turn mowers, compatible with 54" deck models including SS 5425, MX 5075, MX 5475, and Quest E/S-Series. Synthetic rubber compound rated to 120°C with polyester cord reinforcement Typical wear signs: surface glazing, edge cracking, squeal under load — replace before snap failure to avoid reactive downtime during peak season Stock ahead of mowing season with replacement cycle guidance included for fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

V Belt MD145156 16692 – Fleet Supply for Mitsubishi L3E & Generac

MD145156 16692 V Belt 1451 mm Pitch Length — replacement for Mitsubishi L3E engines and Generac MLT3060MV light towers. Chloroprene rubber compound with fabric cord reinforcement handles high-load duty cycles ±0.3 mm tolerance ensures correct pulley groove engagement Operating range –25°C to +85°C for extreme field deployments Scheduled belt replacement prevents cascading failures in alternator and cooling fan drives. Proactive stocking across your fleet reduces unplanned downtime. Replacement interval guidance included with shipment to support your maintenance planning.

In Stock · MOQ 1 pc

View Details