Belt Drive Systems 6 - Heavy Equipment Parts

Belt Set 78-1341/78-603/78-629 for Thermo King SB – Wear Item

Belt Set 78-1341/78-603/78-629, three-piece EPDM belt kit for Thermo King SB — compatible with SB 100 through SB 400 series and Spectrum DE transport refrigeration units. Replacing all three belts (alternator, fan, engine/idler) as a set at scheduled intervals prevents staggered failures; watch for cracking, glazing, or flutter noise as wear indicators Stocking one set per unit supports fleet-level preventive maintenance and rental turnover cycles Replacement cycle recommendations ship with every order for your maintenance planning.

In Stock · MOQ 1 pc

View Details

Belt Tensioner RE548027 Service Part for John Deere 4045 Engines

RE548027 Belt Tensioner for John Deere 4045, 6068, and 3029 engines — high-strength cast iron housing with precision-machined steel pivot shaft. Replace at belt service intervals to prevent spring preload loss, pivot play, and cascading accessory-drive damage across water pump, alternator, and hydraulic pump circuits. Supports fleet-level scheduled maintenance for tractors, combines, loaders, and forestry machines. Replacement interval guidance included with shipment to align belt-drive servicing across mixed fleets Single-piece and batch orders fulfilled under one warranty account Cross-reference RE548027 verified for engine serial prefix compatibility

In Stock · MOQ 1 pc

View Details

Belt Tensioner 3976834/3957434 for Cummins – Scheduled Maintenance

Belt Tensioner 3976834 / 3957434 for Cummins ISBE6.7 & 6CT Engines — replacement for front-end accessory drive systems. Fits Cummins ISBE6.7, 6CT, 6BT, 6CT8.3, 6BT5.9 engine platforms Spring fatigue and pivot bearing wear are predictable failure modes — plan replacement at scheduled belt-drive refresh intervals to avoid unplanned shutdowns and collateral damage to belts, alternators, and fan clutches Replacement interval guidance included with shipment for fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Water Pump Belt 78-1492 for Thermo King – Service Part

Water Pump Belt 78-1492 for Thermo King Refrigeration Units, EPDM rubber with aramid tensile cords, trapezoidal rib profile — engineered as a scheduled wear item within cold chain maintenance cycles. Replace at manufacturer-recommended intervals alongside tensioners and idler pulleys to prevent cascading coolant system failures Fits TK249, TK370, MD-300, T-800R, TriPac APU and other Thermo King series units (cross-reference 781492, 78-1426, 78-336, 77-2848, CP10537) Stock ahead of predictable consumption to keep fleet uptime high across long-haul and marine terminal operations Replacement interval guidance supplied with every order to support planned fleet maintenance scheduling.

In Stock · MOQ 1 pc

View Details

Belt Tensioner Pulley 6735884 | Overhaul Grade for Bobcat T140–T590

6735884 Belt Tensioner Pulley, forged SAE 1045 steel hub with ABEC-3 sealed bearings — compatible with Bobcat T140, T180, T190, T550, T590 compact track loaders. Bearing noise, belt edge glazing, or visible pulley wobble signals end of service life; replacing at scheduled intervals avoids secondary wear on the drive belt and adjacent idlers. Replacement interval guidance ships with every order to support fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Fan Belt J911559 for CASE Loaders & Tractors – Scheduled Maintenance

Fan Belt J911559 for CASE Loaders & Tractors, EPDM Rubber with Polyester Cord — replacement for OEM cross-reference J911559 in the cooling and auxiliary drive system. Replace at scheduled intervals before cracking, glazing, or edge fraying leads to overheating or water pump damage Inspect tensioners and idler pulleys during the same service window to avoid repeat downtime EPDM compound supports extended service life in high-dust, high-temperature operating conditions Recommended replacement intervals included with shipment for fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Water Pump Belt 50-00162-25 for Carrier Vector & Supra – Fleet Supply

Water Pump Belt 50-00162-25 for Carrier Vector & Supra Refrigeration Units — EPDM rubber compound with high-temperature fabric reinforcement, ±0.15 mm dimensional tolerance, compatible with Vector X4 7500, X2 series, and Supra 650/750 units. Replacement intervals depend on route intensity and ambient load — cracking, glazing, or tension loss signal approaching end of service before full failure compromises the cooling loop. Inspect water pump pulley and coolant seals during belt service to catch secondary wear early. Replacement cycle recommendations provided with each shipment to support your fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Narrow V-Belt 0117-9565 for DEUTZ 1011/2011 – Fleet Supply

Narrow V-Belt 0117-9565, 10 × 1125 mm replacement for DEUTZ 1011/2011 series engines, chloroprene rubber compound with high-modulus polyester cords Fits BF4M2011, D2011L03, F2L1011F, F3L1011F, F3L2011, F3M2011, F4L2011 — covers the full 1011/2011 family in a single belt spec Schedule replacement at standard service intervals; side-wall cracking, glazed wear surface, and tension loss signal end of service life Replace all belts on the same drive loop together — mixing new with worn belts causes uneven tension and accelerated failure Stocking ahead by predictable consumption cycle avoids emergency orders and split freight for quarry, port, and municipal fleets Maintenance interval recommendations and quality inspection records ship with every consignment

In Stock · MOQ 1 pc

View Details

Fan Pulley Hub Bearing BD35-12DU8A for Dodge Ram 2500-5500 – Fleet Supply

Fan Pulley Hub Bearing BD35-12DU8A, replacement for Dodge Ram 2500–5500 with 5.9L/6.7L Cummins, ABEC-3 grade, high-carbon chrome steel races ≥60 HRC. Plan proactive cooling system service intervals — replacing before axial play exceeds 0.05 mm prevents downstream damage to water pump seals and EGR coolers Fits Ram 2500/3500/4500/5500 (1998–2012 model years); cross-reference numbers BD35-12ATDDU, 68038177AA, 04429639 verified for interchange Older Ram Cummins platforms remain continuously supported with long-term supply continuity for your fleet.

In Stock · MOQ 1 pc

View Details

Belt Tensioner Kit for Bobcat S130–S300 – Scheduled Maintenance

Belt Tensioner Kit 6662997 / 6702474 / 6725212, heat-treated 40Cr idler pulley, forged aluminum arm — compatible with Bobcat S130–S300, T140–T300, and legacy 753/863 skid steer and track loaders. Replacing the tensioner at belt service intervals prevents cascading overheating and hydraulic pump damage; swapping the full kit — pulley, thrust bearing, and arm together — avoids premature re-entry and extends the next maintenance window. Replacement cycle guidance and stocking recommendations for mixed fleets included with shipment. Fits Bobcat 653, 751, 753, 763, 773, 853, 863, 873, 883, 963, S130–S300, T140–T300, A220, A300 Cross-reference: 6662997, 6702474, 6725212, 38C820, 6655781, 6704820, 6700115, 73G656, 6704444, 6660995, 6704443, 61D6 MOQ 1 piece, warranty 3–12 months

In Stock · MOQ 1 pc

View Details

V-Belt 3288497 for Cummins ISB QSB – Scheduled Maintenance Wear Item

V-Belt 3288497 for Cummins ISB & QSB, High-Tensile Synthetic Rubber — replacement for scheduled maintenance on B and C Series diesel engines. Typical wear signs include sidewall cracking, glazing, and tension loss; plan swaps before these symptoms cascade into alternator or coolant pump downtime. Replace as a single wear item or pair with tensioner inspection at the same service interval to maximize uptime across your fleet. Recommended replacement intervals included with every shipment to support your preventive maintenance planning.

In Stock · MOQ 1 pc

View Details

Serpentine Belt R123307 Replacement for John Deere – Fleet Supply

Older John Deere engine platforms remain in active supply with full traceability on each batch.

In Stock · MOQ 1 pc

View Details