Block & Internal Parts 2 - Heavy Equipment Parts

Kubota D905-V1505 Connecting Rod – Scheduled Maintenance

Connecting Rod for Kubota D905, D1105, V1505 Engines — forged SAE 4340 alloy steel, shot-peened I-beam section, HRC 38–42. Plan replacement around major overhaul intervals; inspect big-end bore and bushing wear before deciding between single-rod or full piston-and-rod assembly exchange Typical wear signs include fatigue micro-cracks at the I-beam fillet and abnormal bearing shell clearance 6-month warranty against manufacturing defects; fleet maintenance schedules and replacement intervals provided with shipment

In Stock · MOQ 1 pc

View Details

Push Rod 31434307 for Perkins 1004-40T – Service Part

Push Rod 31434307 for Perkins 1004-40T, Forged 42CrMo Steel, ≥900 MPa — compatible with 40+ Perkins engine variants across CASE, Landini, New Holland, and Kobelco equipment. Typical inspection at top-end service intervals; replace as a matched set when tip wear or straightness deviation exceeds tolerance to avoid cascading valve train damage. Stock ahead of predictable consumption on aging fleets. Replacement cycle guidance included with shipment for fleet planning MOQ 1 piece, ISO 9001 production

In Stock · MOQ 1 pc

View Details

GM V6-Compatible Camshaft Holding Tool Kit – Fleet Supply

EN-48383, EN-46105 Camshaft Holding Tool Kit, high-strength hardened steel — supports timing service on GM V6 platforms including LP1, HFV6, and 2.8L–3.6L variants for construction, generator, and auxiliary power units. Aligns with scheduled timing chain and belt intervals to prevent unplanned fleet downtime Inspect jaw flatness and anti-rotation pins regularly; replace the tool when engagement drift appears Legacy V6 platforms remain supported even as OEM tool supply thins Replacement interval guidance ships with every order to support your maintenance planning cycle.

In Stock · MOQ 1 pc

View Details

CONNECTING ROD 17311-22014 for Kubota D1703/V2203 – Scheduled Maintenance

Connecting Rod 17311-22014, 42CrMo alloy steel — compatible with Kubota D1703 and V2203 engines powering KX, U, R, and L series machines. Inspect at major overhaul intervals; knocking under load, rising oil consumption, or compression loss signal fatigue before cascading crankshaft damage occurs. Planned replacement of rods as a matched set during bottom-end rebuilds preserves bearing and block integrity across the engine's remaining service life. Sustained aftermarket supply keeps aging Kubota fleets running long after factory support windows narrow. Replacement interval guidance included with every shipment to support your fleet maintenance schedule.

In Stock · MOQ 1 pc

View Details

Valve Cover Gasket Set for Dodge Cummins 12V 5.9L – Service Part

3902666, 3910824, 3930906 Valve Cover Gasket Set — multi-layer composite rubber-silicone blend, sustained temperature resistance up to 180°C, Shore A 65±3 hardness. Replacement for Cummins 6BT/5.9L engines in Hyundai R210LC-7, R220LC-7, R290LC-7 excavators and Volvo EC140, EC290 — plan gasket renewal at each scheduled top-end service to avoid oil seepage into the valve train. Pair with valve cover bolts and breather hoses during overhaul for consistent torque retention across thermal cycles. OEM cross-reference: 3902666, 3910824, 3930906, J902666, 2853071. Legacy Cummins-powered fleet supply remains available with planned maintenance intervals aligned to your service schedule.

In Stock · MOQ 1 pc

View Details

Kubota V2003/V2203/V2403-Compatible Connecting Rod – Fleet Supply

1G924-22014 Connecting Rod for Kubota V2003/V2203/V2403 engines, forged alloy steel with shot-peened surface treatment — compatible with R430 wheel loaders, KX040-4 excavators, and L/MX/M-series tractors. Plan rod renewal at bearing clearance growth or oil pressure decay to avoid unplanned teardowns Single-rod replacement suits isolated damage; full-set renewal keeps balance matched across firing order Verify crankshaft journal grade (STD or undersize) before ordering to coordinate bearing shell selection Replacement interval guidance included with shipment to support fleet overhaul scheduling across mixed Kubota platforms.

In Stock · MOQ 1 pc

View Details

Wear Item Con Rod Bearing Set Compatible with Kubota V3307 Engine

Connecting Rod Bearings Set for Kubota V3307 — compatible with Kubota M6040, M6060, KX080-3, and Bobcat S630, S650, T650, featuring forged steel backing with Babbitt overlay. Schedule replacement when oil consumption rises or audible knock appears under load to prevent crankshaft damage Assess crankshaft journal condition and rod bolt stretch before fitting to ensure full bearing service life Fleet maintenance intervals and stocking recommendations provided with every order for lifecycle planning.

In Stock · MOQ 1 pc

View Details

Connecting Rod 7031360 Replacement for Bobcat E42–E85 Long-Life

7031360 Connecting Rod, Forged Steel, Shot-Peened Surface — replacement for Bobcat E42–E85 and Doosan D24 engines. Replace during mid-life overhauls or when oil analysis shows bearing wear metals; evaluate piston pins, bushings, and bearings together to avoid repeat teardowns. Cross-reference 7031362, 7031361, 7031358, 7031359 provided for identification only. Fits E32, E35, E42, E45, E50, E55, E63, E85, S450–S650, T450–T650 series Single-rod or full-set supply for scheduled rebuilds Replacement interval guidance and legacy platform availability confirmed with every order

In Stock · MOQ 1 pc

View Details

3052170/3047479 Rocker Arm – Fleet Supply for Cummins NT855 N14

3052170/3047479 Rocker Arm – Forged 42CrMo Steel, Zinc-Nickel Plated — planned replacement for Cummins NT855, N14, NH855 and John Deere 6810, 6910 engines at scheduled overhaul intervals. Replace at top-end service to avoid burnt valves and cylinder head damage from progressive roller tip and bore wear Single unit or full set supply aligned with fleet maintenance schedules across aging engine platforms Fits continuous-duty off-highway applications in mining, quarrying and agricultural service Replacement interval guidance and long-term supply support for legacy NT855 and N14 platforms included with each order.

In Stock · MOQ 1 pc

View Details

Crankshaft Seal 04102866 for Deutz DL2011L & BFL2011 – Scheduled Maintenance

Crankshaft Seal 04102866 for Deutz DL2011L & BFL2011, NBR Material, 120°C Service — a scheduled maintenance wear component compatible with Deutz TCD 2.9, TCD 3.6, and 1011-series engine families. Lip hardening and micro-leakage are early wear indicators before visible oil reaches the flywheel housing Replace during planned service windows to prevent secondary bearing damage and unplanned downtime Inspect adjacent main bearings, timing gears, and flywheel housing gasket at each seal swap Cross-reference verification (interchange 04175433, 02108831, 04128170) and replacement interval guidance supplied with every shipment.

In Stock · MOQ 1 pc

View Details

17-44145-00 Crankshaft Seal Kit | Service Part for Carrier Chillers

17-44145-00 Crankshaft Seal Kit, 38 mm shaft diameter, FKM sealing lip — compatible with Carrier 05G compressors across Optima, Supra, and Ultima chiller series. Replacing this seal at scheduled intervals prevents oil leakage, bearing wear, and unplanned downtime; inspect the crankshaft surface finish and adjacent bearings before deciding between seal-only or full assembly overhaul. AISI 304 housing and fluorocarbon lip rated to 200°C and 12 bar suit high-ambient, variable-load plant conditions. Fleet maintenance teams benefit from stocking this cross-reference 17-44145-00 seal kit ahead of predicted consumption to keep aging Carrier chillers running past thinning support windows.

In Stock · MOQ 1 pc

View Details

97333173 Connecting Rod | Overhaul Grade for Ingersoll Rand SS5

97333173 Connecting Rod for Ingersoll Rand SS5, Forged 40Cr Steel — compatible with SS5, SS5L5, and SS5N5 compressor models. Proactive replacement during planned overhauls prevents cascading damage to crankshafts and bearings, reducing unplanned downtime across fleet operations. Typical wear indicators include increased vibration and audible knocking at the big-end bore. Big-end bore tolerance: ±0.005 mm, surface hardness HRC 38–42 Phosphate and oil coating for corrosion resistance MOQ: 1 piece, ISO 9001 production Replacement interval guidance and long-term supply support for aging SS5 units included with every order.

In Stock · MOQ 1 pc

View Details