Engine Auxiliary Components

Engine Auxiliary Components

Spark Plug and Wire Kit for John Deere XUV 825i – Service Part

MIU12783 MIA11722 Spark Plug and Wire Kit, 0.6 mm center electrode, 16 mm hex, compatible with Yanmar 3TNV70 and John Deere GATOR XUV 825i, 835M series. Ignition wear shows as rough idling, hard cold starts and misfire codes — replacing plugs and wires together at scheduled service intervals avoids unplanned UTV downtime across remote job sites. Stock ahead for multi-unit fleet preventive maintenance cycles. Cross-reference verified against alternate numbers; replacement schedule guidance supplied with each consignment.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Stop Solenoid 3991167 SA-4941-12 – Service Part for Cummins 4BT

12V Stop Solenoid 3991167 SA-4941-12, replacement for Cummins 4BT engines in Hyundai R130/R170 — IP67 sealed with Class H coil insulation rated to 180°C, supporting up to 500,000 engagement cycles. Delayed shutdown response or intermittent engagement signals winding degradation before complete failure, making proactive replacement at electrical inspection intervals cost-effective Single-component swap preferred over full harness replacement unless recurring faults trace to upstream wiring Replacement interval guidance included with shipment to support fleet-level preventive planning across aging Hyundai R130 and R170 units.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Fuel Shut Off Solenoid SBA185206083 for Shibaura ISM N844 – Service Part

SBA185206083 Stop Solenoid, 12V DC, IP65 Brass Housing — replacement for Shibaura ISM N844 engines and compatible with New Holland TC, Boomer, T, and Workmaster tractor series. Watch for failure signs: no pull-in on cranking, random mid-cycle shutdown, or abnormal coil heating — early swap avoids unplanned fleet downtime. Typical service life reaches 100,000+ duty cycles; plan replacement during scheduled electrical system audits rather than waiting for field failure. Fits over 70 machine variants including TC35DA, Boomer 3050, and T2420 — confirm engine serial for exact application match. Maintenance interval recommendations ship with every order to support your fleet service planning.

In Stock · MOQ 1 pc

View Details

Alternator

12V 55A Alternator 3A611-74013 for Kubota – Scheduled Maintenance

12V 55A Alternator 3A611-74013 — compatible with Kubota L-series, M-series and R-series tractors as a scheduled maintenance replacement for engine auxiliary charging systems. Replacing this alternator at recommended service intervals helps prevent voltage irregularities that degrade batteries and electronic control modules over the machine's service life. Watch for dimming lights, slow cranking, or battery warning indicators as early signs of regulator or bearing wear. Inspect drive belts, tensioners and battery terminals during alternator service to avoid cascading electrical failures. Fleet operators can rely on long-term aftermarket supply for both current and aging Kubota tractor models.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V 9T Starter Motor 132-4948 for Kubota D1105 – Fleet Supply

132-4948 Starter Motor, 12V 9T, Class H Insulation — replacement for Kubota D1105 and Toro Groundsmaster compact equipment fleets. Solenoid lag, engagement grinding, or voltage drop under load signal end-of-life on high-cycle mowers and loaders Replace the motor alone or inspect the flywheel ring gear and battery circuit for linked wear across aging units Stocking ahead of predictable failures keeps rental turnaround and municipal maintenance schedules on track Suggested replacement intervals and compatibility verification for mixed fleets included with shipment.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Starter Motor 12V 2.2KW 6670727 | Overhaul Grade for Bobcat Excavator

Starter Motor 12V 2.2KW 6670727 — replacement for Bobcat E25, E32, E35, E42, E50 compact excavators and S100 loader. 10-tooth pinion, CW rotation, matches cross-reference SND0408 and 228000-6921 Plan replacement at early signs of slow cranking or intermittent engagement to avoid unplanned downtime across the fleet Inspect battery, alternator and ring gear during the same service window to address root causes Typical service intervals and stocking recommendations included with shipment to support long-term fleet planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Glow Plug 185366250 185366220 for Perkins 402D-05 – Scheduled Maintenance

Glow Plug Set 185366250 185366220, 3 pcs, 11 V–14.5 V DC — replacement for Perkins 402D-05, 403D-11, 404D-15 and Shibaura S773L engines used in compact excavators, agricultural tractors and marine generators. Proactive renewal during scheduled service prevents cold-start misfires, white smoke at startup and extended cranking caused by thermal element degradation Fits CASE DX-series, New Holland TC/TZ-series, Hitachi ZX20U and Kioti CS-series sharing the same Perkins 400-series platform, enabling consolidated fleet stocking ahead of winter or high-altitude deployment Cross-reference 185366250, 185366220 verified across multiple machine brands Replacement interval guidance included with shipment to support planned maintenance scheduling across your fleet

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Scheduled Maintenance Glow Plug 185366190 TPN257 for Perkins 404D-22

Glow Plug 185366190, M10×1.25 thread, 90° conical seat — replacement for Perkins 404D-22, 404C-22 and 104 series engines in generator sets and compact equipment. Scheduled replacement before failure prevents incomplete combustion, carbon buildup and injector wear, keeping fleet cold-start readiness predictable across seasonal cycles. Typical service intervals align with major engine maintenance schedules for genset and construction applications. Maintenance interval recommendations ship with every order for fleet planning reference.

In Stock · MOQ 1 pc

View Details

Alternator

Alternator 2871A306 for Perkins 1004 & 1104 – Fleet Supply

2871A306 Alternator, 12V 65A — replacement for Perkins 1004 and 1104 series engines including 1004-40T, 1104C-44, and 1104D-44TA variants. Typical alternator wear shows as slow cranking, dimming lights, or repeated battery drain before total failure Proactive replacement at scheduled service intervals prevents cascading electrical faults and ECU communication errors on aging fleet machines Class H insulation and zinc-nickel plating support reliable output in high-dust and high-humidity operating conditions Older Perkins 1004/1104 production runs remain continuously supplied for long-term fleet planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Wear Item Stop Solenoid Compatible with Cummins 5.9L Ford F700

Replacement cycle recommendations ship with every order to support fleet-level maintenance planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Glow Plug 19077-65510 for Kubota D1403 D1503 D1703 – Service Part

Glow Plug 19077-65510 for Kubota D1403, D1503, D1703 — Dual-coil Ni-Cr alloy, <12 sec warm-up — replacement for cold-start systems in Kubota-powered tractors and excavators. Replace as a matched set to prevent uneven cylinder heating and repeated service visits Failing plugs accelerate starter motor and battery wear — schedule replacement before cold-season demand spikes Typical wear signs include hard cranking, white smoke at startup, and extended idle warm-up Compatible with L-series tractors, KX and U-series excavators, and M/MX utility tractors across the fleet service life. Planned stocking quantities aligned with seasonal replacement cadence and aging machine continuity.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Fuel Shut Off Solenoid J904630 for CASE – Service Part 12V Fuel Shut Off Solenoid J904630 for CASE – Scheduled Maintenance

J904630 Stop Solenoid, 12V DC, <120 ms Response — replacement for CASE 1845C, 580K, 580SK and Cummins 4B3.9, 6B5.9 engines (cross-reference J904630, 3904630). Solenoid insulation and plunger response typically degrade before total failure, making scheduled replacement during major service intervals more cost-effective than emergency field swaps Brass alloy body with PTFE-coated plunger supports frequent start-stop cycles in rental fleet duty profiles Recommended service interval guidance included with shipment to support preventive maintenance planning

In Stock · MOQ 1 pc

View Details