Glow Plug 2 - Heavy Equipment Parts | XUNPO Global Distribution

Wear Item Glow Plug 16281-65510 Compatible with Kubota D905 D1005 D1105

16281-65510 Glow Plug — M10×1.25 thread, 12V/24V, nickel-chromium heating element for Kubota D905, D1005, D1105, D1305 engines. Fits B1700 through B7800HSD compact tractors across multiple generations. Scheduled replacement before cold season prevents starter motor strain and battery depletion caused by extended cranking Replacing the full set is recommended when one plug shows thermal fatigue — remaining units typically share similar cycle wear Inspect cylinder head sealing surface and battery terminals during service to address the root cause of glow plug failure 16281-65510 cross-reference: 16241-52033, 16241-52032. Replacement interval guidance included with each shipment for fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Glow Plug 1G679-65512 | Overhaul Grade for Kubota Z602 V2403 D902

Glow Plug 1G679-65512 (cross-reference) for Kubota Z602, V2403, D902, and V1505 diesel engines — M10×1.25 thread, <12 sec heat-up to 850°C. Replace as a matched set before cold seasons to maintain balanced cylinder pre-heating and prevent uneven combustion wear White smoke and prolonged cranking signal approaching end of service life Recommended replacement intervals and fleet stocking quantities confirmed per your operating environment.

In Stock · MOQ 1 pc

View Details

Glow Plug 16851-65510 for Kubota D640 D722 – Scheduled Maintenance

Glow Plug 16851-65510, Inconel 600 Sheath, 0.9–1.1 Ω — compatible with Kubota D640, D722 and a wide range of B, BX, KX, RTV, and ZD series machines. Plan replacement as a set during pre-winter service to avoid staggered cold-start failures across the fleet Typical wear progresses from slow cranking to misfire; swapping all plugs at once reduces repeat labor and keeps machines running on schedule Adjacent checks on battery health, relay timing, and head wiring extend pre-heating system reliability Scheduled maintenance intervals and replacement guidance included with shipment for fleet planning

In Stock · MOQ 1 pc

View Details

Wear Item Glow Plug 6655233 Compatible with Kubota V1903 V2003T V2203

Glow Plug 6655233 — Kubota V1903/V2003T/V2203, M12×1.25 Thread, 11V–14.5V compatible with Bobcat 751, 753, 763, 773, S150, S160, S175, S185, T190 skid steers and excavators. Inconel 600 sheath with dual-coil ceramic element reaches 1,250°C within 8 seconds for reliable cold starts. Scheduled replacement prevents cascading wear on starter motors and batteries across fleet operations Integrated thermal cutoff extends service intervals in high-cycle and cold-climate applications Planned replacement schedule recommendations ship with every order to support your fleet maintenance calendar.

In Stock · MOQ 1 pc

View Details

Glow Plug 16693SRV Compatible with Mitsubishi L3E – Service Part

9310

In Stock · MOQ 1 pc

View Details

MIU805954 Glow Plug Service Part for John Deere & Yanmar – Fleet Supply

MIU805954 Glow Plug (cross-reference), nickel-alloy element, 3-pack — planned replacement part for John Deere and Yanmar diesel engines including 3TNV80F, 3TNE74 series, compact tractors, utility vehicles, and mowers operating in cold or high-altitude conditions. Thermal cycling gradually degrades heating elements; scheduled replacement before winter preserves battery, starter motor, and injector life 3-pack format aligns with common 3-cylinder Yanmar configurations, simplifying fleet-level inventory across mixed equipment Inspect relay, wiring harness, and timer module during the same service event to avoid repeat downtime Replacement interval recommendations ship with every order to support your seasonal maintenance planning.

In Stock · MOQ 1 pc

View Details

Glow Plug 185366190 TPN257 for Perkins 404D-22 404C-22 – Service Part

Glow Plug 185366190 for Perkins 404D-22 / 404C-22, 4 PCS per pack — replacement for cold-start reliability across generators, loaders and compact equipment powered by Perkins 404-series diesels. Replacing the full set maintains balanced combustion chamber heating and prevents repeated cold-weather no-start events Plan seasonal swap before winter or high-altitude deployment to avoid unscheduled fleet downtime Inspect relay and wiring circuits during change-out to address root cause of premature failure Replacement interval guidance and cross-reference sheet shipped with every order

In Stock · MOQ 1 pc

View Details

Aftermarket Glow Plug 19077-65510 – Scheduled Maintenance for Kubota D1403 D1503 D1703 D1803

Glow Plug 19077-65510 for Kubota D1403 D1503 D1703 D1803 — aftermarket cold-start component replacing cross-reference 19077-65510, 19077-65512, 19077-65513. Scheduled replacement at pre-winter service intervals prevents cold-start failures across tractor, excavator, and generator fleets Replace as a full set to maintain balanced cylinder pre-heating and avoid repeated stress on individual cylinders Inspect glow plug relay and wiring connectors during renewal to address correlated aging Fleet maintenance plans supported with long-term supply continuity for aging Kubota-powered machines.

In Stock · MOQ 1 pc

View Details

Glow Plugs 7030400 0100276034 | Service Part for Doosan Bobcat

Glow Plugs 7030400 0100276034, Diesel Engine Pre-Heating Components — replacement for Doosan and Bobcat equipment including D18, D24, S510, S530, S550, S570, S590, T550 and T590 models. Replace as a matched set during pre-winter service intervals to prevent extended cranking, white smoke at startup, and unnecessary battery or starter motor strain Schedule proactive replacement based on operating hours and cold-climate deployment rather than waiting for failure Maintenance interval guidance provided with shipment to support fleet-level planning across seasonal cycles.

In Stock · MOQ 1 pc

View Details

15261-65513 Glow Plug Replacement for Kubota D600-D1005 – Service Part

15261-65513 Glow Plug, ISO-certified aftermarket replacement for Kubota D600–D1005 diesel engines, 3 pcs per set — fits agricultural tractors, compact excavators, and generators. Replace as a matched set during seasonal or hours-based service to maintain uniform cylinder heating across all bores Coordinate with fuel filter and battery checks to address the full cold-start chain before winter deployment Nickel-plated terminals and precision-machined housing resist oxidation through extended service intervals Suitable for older Kubota models where OEM supply has thinned; replacement interval guidance included with shipment.

In Stock · MOQ 1 pc

View Details

Glow Plug 8-98290-755-0 for Isuzu 4JJ1 4HK1 – Fleet Supply

8-98290-755-0 Glow Plug for Isuzu 4JJ1 / 4HK1, 4 Pcs Set — replacement for cold-start ignition on NPR, NQR, FTR and FVR commercial trucks. Scheduled wear item in the Isuzu auxiliary cold-start system; longer cranking times and white smoke on startup signal approaching service interval Full set renewal avoids sequential plug failures across cylinders, reducing battery and starter motor strain during winter operations Fits 4JJ1, 4HK1, 4HK1-TCS and 4HK1-TCN engine variants with cross-reference verification covering superseded part numbers Stocking ahead of cold season prevents unplanned downtime across multi-truck fleets Replacement interval guidance included with shipment for predictable fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Glow Plug 3974953 for Kubota D1402 V1702 – Service Part

Glow Plug 3974953 for Kubota D1402 V1702 Engines, New Aftermarket — replacement for Bobcat 643, 645, 743, 743B skid steer loaders and 1600 wheel loader. Gradual heating element degradation causes slow cold starts, excess white smoke, and increased starter motor load over time Replace all four cylinders together when one fails — remaining plugs from the same batch are typically near end of service life Inspect voltage regulator and battery health before fitment to prevent repeat burnout of new plugs Planned maintenance schedules and cold-season preparation intervals supplied with shipment.

In Stock · MOQ 1 pc

View Details