Belt Drive Systems 2 - Heavy Equipment Parts

Drive Belt Tensioner & Cooling Fan Pulley Kit for Bobcat Skid Steers – OEM-Replacement Quality

Stop unexpected downtime and belt slippage on your Bobcat skid steer — this OEM-replacement drive belt tensioner & cooling fan pulley kit delivers consistent tension, quieter operation, and longer belt life across high-hour machines. Direct-fit replacement for factory part numbers 6735884 and 6662997, including correct bearing preload specs and pulley offset — critical for proper fan clearance and belt tracking Covers 15+ Bobcat models: 773, S175, T190, S205, 753, 763, and more — no cross-referencing guesswork Eliminates the “tensioner wobble” common with worn or low-grade kits, preventing premature belt wear and overheating Ready to ship from Guangzhou warehouse — 1-piece MOQ, no minimums, no delays waiting for OEM backorders

In Stock · MOQ 1 pc

View Details

Correa en V para ventilador 080109107 para Perkins 404C-22 – Reemplazo de alta resistencia

Stop unexpected fan belt failures and costly downtime on your Perkins 404C-22 — this high-tensile Perkins fan belt delivers OEM-equivalent grip and heat resistance, even under sustained load and high ambient temperatures. Exact fit for Perkins 404C-22, 404C-22T, and 104-22 engines — verified against original cross-section profile (SPZ 8.5×11 mm) and pitch length tolerance (±0.5 mm) Replaces part numbers 080109107 and T80109107 with zero pulley slippage or premature stretch Ships same-day from our Guangzhou warehouse — no waiting weeks for OEM backorders Built with aramid tensile cords (not polyester), so it holds torque through repeated cold starts and thermal cycling

In Stock · MOQ 1 pc

View Details

54″ Deck V-Belt 130-0843 for Toro & Exmark Zero-Turn Mowers – Heavy-Duty Replacement

Stop losing hours to deck belt failures mid-mowing — this heavy-duty 130-0843 v-belt delivers consistent, vibration-free power transfer so your Toro or Exmark 54" zero-turn stays up and cutting all season long. Built with aramid tensile cords and a specially formulated EPDM compound, it resists heat buildup and stretch far better than standard belts — critical for high-RPM deck drives where slippage kills blade tip speed. Fits exact OEM specs: replaces 130-0843, 1300843, and all SL/P variants — no guesswork on tension or alignment Verified fit for Toro TimeCutter models 74740, 74741, 75754, 75756, 75757 (including SN ranges up to 999999999) and Exmark Quest E/S-Series QTE708GEM54100 & QZS708GEM54200 No more “almost-right” belts — features the correct 13.5° included angle and 0.530" top width for true OEM pulley engagement Ships same-day from Guangzhou warehouse — order before 3 PM local time and get it en route in under 24 hours

In Stock · MOQ 1 pc

View Details

Conjunto de tensores de correa para motores Cummins 6C, ISB, QSB – Reemplazo directo

Stop unexpected belt slippage and premature accessory failure on your Cummins-powered equipment — this belt tensioner delivers consistent, OEM-matched tension right out of the box. Built to replace 3936213, 5259022, and 3976831, it eliminates the guesswork and downtime caused by worn or inconsistent factory units. Fits Cummins 6C, ISB, QSB, 4B3.9, 6B5.9, B6.7, and 10+ other engine families — no cross-referencing headaches Features a precision-calibrated hydraulic damper (not just spring-loaded) for smooth, vibration-dampened tension control Ready to ship same day from our Guangzhou warehouse — no waiting weeks for OEM backorders Backed by XUNPO’s 6-month warranty and technical verification support before you order

In Stock · MOQ 1 pc

View Details

Correa de transmisión 59011-1077 para Kawasaki Mule UTV – Reemplazo de alta durabilidad

Stop losing uptime to premature belt failure — this Kawasaki Mule drive belt delivers consistent, high-torque power transfer across decades of KAF540 and KAF620-series models, even under heavy load or frequent stop-start operation. Engineered with aramid-reinforced poly-V construction — the same tensile strength spec used in OEM-spec replacement belts for KAF620E/J/M/H variants Fits 1990–2023 Mule 2010/2020/2030/3000/3010/3020/4000/4010 (including all Trans4x4, Camo, and SE submodels) without modification Direct replacement for both 59011-1077 and 59011-1053 — eliminates cross-reference confusion and ordering errors Pre-stretched and dynamically balanced to prevent early slippage or heat buildup in the CVT housing

In Stock · MOQ 1 pc

View Details

Correa 486586 para cortadoras Scag SVRII-61V – Reemplazo de alta resistencia

Stop losing uptime to deck drive belt failures — this Scag mower belt delivers rock-solid power transfer and extended service life on SVRII-61V mowers, even under heavy commercial cutting loads. Built with aramid-reinforced tensile cords and precision-molded cog geometry, it eliminates the slippage and premature stretch that plague generic replacements. Fits all major SVRII-61V variants including EFI, FX, and BV models — no guesswork on compatibility Direct replacement for OEM 486586 and cross-references like 754-05078, 266-187, and 539107709 Features a true 14.2° included angle on the V-cog profile — critical for proper engagement with Scag’s dual-pulley deck drive system Ships from our Guangzhou warehouse in 2–5 working days, with real-time tracking and 6-month warranty against manufacturing defects

In Stock · MOQ 1 pc

View Details

Conjunto de polea tensora de correa 6735884 para cargadoras de orugas Bobcat.

Stop unexpected downtime and costly belt slippage on your Bobcat skid steer — this bobcat tensioner pulley delivers OEM-matched tension control and smooth, consistent drive belt tracking across high-hour cycles. Direct-fit replacement for models 653, 751, 753, 763, 773, and 7753 — no modification or alignment guesswork needed Features precision-ground, sealed-for-life ball bearings (not bushings) — critical for resisting heat buildup during extended loader operation Includes both factory cross-references: 6735884 and 6711698 — so you’re covered whether your service manual or parts catalog lists either Ships from our Guangzhou warehouse in 2–5 working days — no waiting weeks for OEM backorders

In Stock · MOQ 1 pc

View Details

Tensor de correa 87326910 J914086 para excavadoras y cargadoras CASE

Stop unexpected fan belt slippage and costly downtime on your CASE equipment — this direct-replacement CASE belt tensioner delivers OEM-equivalent tension control with zero fitment guesswork. Built to exact factory specs, it eliminates the risk of counterfeit parts causing premature wear or engine overheating. Fits 30+ CASE models — from 1088 excavators and CX210 loaders to RP110/RP85 engines — all in one verified part Includes dual-spring preload calibration for consistent belt tracking under heavy-duty cycles (a detail critical for high-hour fleet operators) Ships same-day from our Guangzhou warehouse — no waiting weeks for OEM backorders Backed by XUNPO’s 6-month warranty and technical verification support before you order

In Stock · MOQ 1 pc

View Details

Correa 153263001 para Vermeer <p> Chipper – Reemplazo de alta resistencia

Stop unexpected downtime and costly delays when your Vermeer BC1000XL chipper belt fails mid-job — this heavy-duty replacement belt 153263001 delivers OEM-equivalent performance with faster availability and better value than factory parts. Exact fit for BC1000XL — engineered to match the original tension, flex angle, and cog geometry so your chipper runs smoothly without slippage or overheating Replaces 153263001, 265-776, and 265776 — no guesswork, no cross-referencing errors Made with aramid-reinforced EPDM compound — the same high-heat, high-torque material used in premium industrial drive belts (not standard rubber) Ships from our Guangzhou warehouse in 2–5 working days — even for single-piece orders

In Stock · MOQ 1 pc

View Details

Tensor de rueda 7167165 para cargadoras de orugas Bobcat – Reemplazo directo

Stop downtime from loose or failing wheel tensioners — get precise, long-lasting track tension control on your Bobcat skid steer with the Wheel Tensioner 7167165, a direct OEM replacement built to match factory specs and performance. Fits 18+ Bobcat models including S550, S570, S770, T770, A770, and all major S/T/A-series loaders — no guesswork needed Made with hardened alloy steel pivot bushings and calibrated spring preload — the kind of detail that prevents premature wear in high-vibration, high-cycle applications Ships from our Guangzhou warehouse in 2–5 working days, with MOQ just 1 piece — ideal when you need it now, not next month Backed by XUNPO’s 6-month warranty and technical verification — because swapping in the wrong tensioner costs more than the part

In Stock · MOQ 1 pc

View Details

Correa en V 178509 para Cummins N14 <p> <strong> – Correa CX resistente al aceite de alta resistencia

Stop unexpected downtime and costly engine damage from belt slippage or oil degradation — this V-belt 178509 for Cummins N14/NH855 delivers OEM-equivalent grip and longevity, even under continuous high-load, high-temperature operation. Oil-resistant CX profile with 22mm top width × 1147mm effective length — the exact geometry required for proper pulley engagement on N14 mechanical and NH855 engines (not just “close enough” metric equivalents) Replaces both 178509 and 76107717 — verified fit for NH220, NH250, NT855, and NTA855 without modification or tensioning guesswork Polyester cord reinforcement + heat-stabilized rubber compound prevents stretch and edge cracking — a known failure point in generic belts after 300–500 operating hours Ships same day from Guangzhou warehouse — no waiting weeks for OEM backorders or risking counterfeit imports

In Stock · MOQ 1 pc

View Details

Correa de Bomba de Impulsión 6736775 para Cargadoras Bobcat – Reemplazo Silencioso y Duradero

Stop wasting time and money on noisy, short-lived drive belts that slip under load — this 6736775 belt delivers quiet, slippage-free power transfer right from the first installation. Built for Bobcat loaders that run hard and demand reliability, it eliminates the high-pitched whine and premature wear that plague standard replacements. Advanced variable cog design with 3 precisely spaced grooves ensures perfect meshing with the pump pulley — no guesswork, no misalignment Fiber-loaded backing + dual-cord reinforcement cuts heat buildup by up to 30%, extending service life even in continuous-duty cycles Exact OEM dimensions: 58.15″ L × 1.19″ W — fits S150, T190, Toolcat 5600 and 8 other models without modification Ships same-day from Guangzhou warehouse — no waiting weeks for OEM backorders or counterfeit risks

In Stock · MOQ 1 pc

View Details