Belts

Belt Drive Systems

Belt 120-3335/265-610 for Toro TimeMaster & Exmark Commercial Mowers

Stop downtime on your 30" Toro TimeMaster or Exmark S-Series mower — this belt 120-3335/265-610 delivers OEM-equivalent grip and longevity, so you keep mowing through heavy commercial schedules without slippage or mid-shift breakage. Fits all major serial ranges for Toro models 20199, 20200, 22200, 22210 and Exmark ECS180CKA30000, ECX180CKA30000, and ECKA30 — verified down to the last digit of your SN label Manufactured with aramid-reinforced tension cords (not just polyester) — the same construction used in factory-spec drive belts to resist stretch under continuous high-torque load No guesswork: replaces both 120-3335 and 265-610 interchangeably, eliminating the risk of ordering the wrong version for your engine year or deck configuration Ships same day from our Guangzhou warehouse — no waiting weeks for OEM backorders or counterfeit delays

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Correa en V para ventilador 1G062-97012 para motores Kubota D905–V1505 – Reemplazo de alta resistencia

Stop unexpected overheating and costly downtime — this Kubota fan belt delivers OEM-matched tension retention and heat resistance for reliable cooling on high-hour D905 and V1505 engines. Built with aramid-reinforced tensile cords (not just polyester), it resists stretch and slippage far longer than generic belts — a real difference you’ll feel after 200+ hours of continuous operation. Fits Kubota tractors including F2680E, F3080, B7610, ZD1511RLF, and more — verified against factory service manuals Exact replacement for part number 1G062-97012 (also listed as 1G06297012) Engine-specific fit for D905, D1005, D1105, V1205, V1305, and V1505 — no guesswork, no misalignment Ships from Guangzhou warehouse same day — no waiting weeks for OEM backorders

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Belt 50-00178-19 for Carrier Ultima XTC & X2 Refrigeration Units

Stop unexpected downtime and costly service calls — this Carrier belt 50-00178-19 delivers OEM-equivalent performance for Ultima XTC and X2 refrigeration units, with precise tension retention even under heavy-duty transport cycles. Direct replacement for 50-00178-19, CP10615, and all listed cross-references — no guesswork on fitment Engineered with aramid cord reinforcement (not just polyester) to resist stretch and slippage in high-heat trailer environments In-stock in our Guangzhou warehouse — ships in 2–5 working days, even for single-piece orders Backed by XUNPO’s 3–12 month warranty against manufacturing defects — because counterfeit belts cost far more than they save

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Correa de transmisión Harley Davidson 40022-91 para Sportster 883/1200 (1991–2003)

Stop losing ride time to belt slippage or unexpected breakage — this OEM-replacement quality Harley Davidson drive belt delivers the same durability and precision fit as factory original, without the OEM markup or 3-week wait. Fits all Sportster 883/1200 XLH models from 1991–2003 — including critical variants like the 883 Hugger XLH and 1200 Custom XLC that often get mis-matched with generic belts Uses high-tensile aramid tensile cords (not fiberglass) — the same spec used in genuine HD replacement belts to prevent stretch-induced timing drift Cross-compatible with Buell M2 Cyclone, S3 Thunderbolt, and XB9R Firebolt — no need to juggle multiple SKUs for mixed garages Backed by our 6-month warranty and real-time logistics tracking — because downtime on a weekend ride isn’t negotiable

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Correa de ventilador de posventa Mitsuboshi REMF-1345 para sistemas de refrigeración de excavadoras

Stop unexpected shutdowns and overheating during critical jobs — this aftermarket Mitsuboshi REMF-1345 fan belt delivers OEM-equivalent grip and heat resistance, so your excavator’s cooling system stays stable under load. Built to match the exact pitch length (1345 mm), top width (22 mm), and angle (40° V-belt profile) of genuine Mitsuboshi specs, it eliminates slippage and premature wear that plague generic belts. Ships same day from our Guangzhou warehouse — no 2–4 week OEM waits Fits CAT 330/349, Komatsu PC360/PC460, Hitachi ZX350/470 & other Tier 3–4 machines with REMF-1345 cooling circuits Reinforced EPDM rubber compound resists oil, ozone, and thermal cracking — a must for high-hour fleet operations MOQ just 1 piece: test-fit before bulk orders, no minimum pressure

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

52″ Deck Belt for Toro Grandstand Mowers – Heavy-Duty Replacement

Stop losing hours to belt slippage, snapping, or misalignment on your Toro Grandstand—this 52" deck belt for Toro Grandstand mowers delivers OEM-equivalent grip and tension retention, even under heavy multi-blade loads and high-RPM operation. Fits Toro 74505, 74519, 74529, and 79505 Grandstand & Multi Force models—verified with precise 131-1122 / 145-3482 cross-reference Reinforced aramid tensile cords and heat-resistant EPDM compound prevent stretch and edge fraying—the #1 failure point on aftermarket 52 inch belts Ships from our Guangzhou warehouse in 2–5 working days, MOQ just 1 piece—no waiting weeks for OEM backorders Backed by XUNPO’s 6-month warranty against manufacturing defects and real-time technical support for correct installation

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Correa en V 9001A-96003 para montacargas con motor Toyota 4Y – Reemplazo de alta durabilidad

Stop downtime from snapped or slipping belts — this V-belt 9001A-96003 delivers OEM-matched grip and heat resistance for Toyota 4Y-engine forklifts, so your 7FG/8FG series stays running through heavy shifts. Fits 42+ model variants — including hard-to-match FGZN, 7FGCU, and 8FGU series with dual-belt configurations Manufactured to exact 13.5° included angle and 960mm pitch length — critical for proper tension and pulley alignment on 4Y crankshaft drives Eliminates guesswork: verified cross-reference for genuine 9001A-96003 replacement (not a generic “equivalent”) Ships same-day from Guangzhou warehouse — no waiting weeks for OEM backorders

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Drive Belt 105245801 for Club Car Carryall & Precedent – High-Durability Replacement

Stop downtime and costly repairs caused by cracked, stretched, or slipping drive belts — this Club Car drive belt delivers OEM-matched durability and precise fit for real-world utility vehicle use. Built with reinforced aramid tensile cords and a heat-resistant EPDM compound, it handles repeated load cycles on Carryall 550/900 and Precedent models without premature elongation — a common failure point with generic belts. Fits Club Car Precedent, Carryall 300/500/550/700/900 Turf, Onward & Cafe Express Direct replacement for part numbers 105245801 and 10G3758 Features the exact 10.5° included angle and 1065 mm pitch length required for proper CVT engagement Ships from Guangzhou warehouse — most orders ship in 2–5 working days, MOQ just 1 piece

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Water Pump Belt 50-00162-25 for Carrier Vector & Supra Refrigeration Units

Stop unexpected downtime on your Carrier refrigeration units — this genuine-spec Carrier water pump belt delivers OEM-equivalent grip and heat resistance to keep Vector X4 7500 and Supra 750 systems running smoothly through long hauls and high ambient temps. Fits 12+ Carrier transport models including X2 2500R, X4 6600 MT, and Supra 650 — no more cross-referencing mismatched belts Replaces 14 part numbers including 50-00162-25, 50-60288-21, and CA500016225AM — one SKU covers your entire fleet’s legacy and current units Manufactured with EPDM rubber + aramid tensile cords — the same compound Carrier specifies for >15,000-mile service life under continuous load Pre-stretched and laser-aligned at factory — eliminates break-in slippage that causes early overheating in high-cycle applications

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Drive Belt 154537-001 for Vermeer BC600XL Brush Chipper – Heavy-Duty Replacement

Stop unexpected downtime and costly delays when your Vermeer BC600XL brush chipper stalls mid-job — this heavy-duty Vermeer BC600XL drive belt, 154537-001 delivers OEM-equivalent power transfer and heat resistance for sustained high-RPM operation. Engineered with aramid tensile cords and EPDM rubber compound — the same spec used by top-tier aftermarket suppliers to prevent stretch and slippage under load Fits precisely without modification: matches original pulley groove angles and center-to-center tension specs for BC600XL’s dual-belt drive system Ships from our Guangzhou warehouse in 2–5 working days — no waiting weeks for OEM backorders Backed by XUNPO’s 6-month warranty against manufacturing defects, plus free technical verification before you order

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Cooling Fan Belt 6669034 for Bobcat 751–S130 Skid Steer – Heat-Resistant Serpentine Belt

Stop overheating shutdowns and keep your Bobcat running through long shifts — this heat-resistant serpentine belt delivers OEM-level durability without the wait or markup. Built for real-world skid steer abuse, it’s the Bobcat fan belt trusted by fleet managers across North America and the Middle East who can’t afford downtime from brittle or oil-swollen belts. Exact 6669034 replacement — fits Bobcat 751, 753, 763, 773, and S130 with zero tensioner adjustment needed 1005mm inner circumference + 8mm thickness — critical dimensions that prevent slippage on high-RPM cooling fans Polyester cord reinforcement + nitrile rubber compound resists heat up to 120°C and hydraulic oil exposure MOQ 1 piece, ships same day from Guangzhou warehouse — no waiting weeks for OEM backorders

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

V-Belt 01179566 for Deutz F3L2011/F4L2011 – High-Durability Replacement

Stop unexpected downtime and costly engine stoppages—this Deutz V-belt 01179566 delivers OEM-matched grip and heat resistance for F3L2011/F4L2011 engines, even under continuous high-load operation. Direct-fit replacement for Deutz BF3L2011, BF4L2011, TD2011L04W, TCD2011L04I and 8+ other D2011-series variants — no alignment guesswork Manufactured with aramid-reinforced EPDM compound (not standard polyester cord) for 2.3× longer service life vs. budget belts in dusty, high-temp environments Ships same-day from our Guangzhou warehouse — no waiting weeks for OEM backorders or risking counterfeit imports Cross-references 0117-9566, 02235810, MT40285048 — verified against Deutz’s latest technical bulletins

In Stock · MOQ 1 pc

View Details