Water Pump 2 - Heavy Equipment Parts | XUNPO Global Distribution

Water Pump With Gasket 1273085C91 for CASE IH 234-1140 – Service Part

1273085C91 Water Pump With Gasket for CASE IH 234-1140 Tractors — replacement for OEM cross-reference 1273085C91 and 1962912C1, new aftermarket condition with gasket included. Scheduled cooling system service prevents cascading engine damage from gradual temperature climb, coolant seepage at the weep hole, or bearing noise. Replace alongside thermostat, drive belt, and coolant flush to address the full system rather than the single worn component. Stocking ahead of peak seasons keeps fleet maintenance on calendar, especially for older 234 and 244 series tractors where supply continuity matters. Replacement interval guidance ships with your order to support seasonal fleet planning across CASE IH agricultural models.

In Stock · MOQ 1 pc

View Details

CH12859 Water Pump – Service Part for John Deere 850 950

CH12859 Water Pump with 2" OD Fan Hub — replacement for John Deere 850, 950, 1050, 900HC and Yanmar 3T80-J, 3T90-J, 3T90T compact tractor engines, supplied new with gasket. Early bearing wear and shaft play signal the start of pump decline — scheduling replacement before seal leakage or impeller loss avoids head gasket and liner damage downstream. Plan seasonal stocking across planting and harvest cycles to keep fleet cooling systems ahead of predictable wear intervals. Maintenance interval guidance and cross-reference verification included with every shipment.

In Stock · MOQ 1 pc

View Details

Water Pump 6684225 6653941 | Service Part for Kubota D1402 Bobcat

Water Pump 6684225 6653941 for Kubota D1402 engines — replacement cooling component compatible with Bobcat skid steer loaders 643, 743, 751, 753, S150, S160, S175, and S185 series. Watch for rising coolant temperature, shaft bearing noise, or unexplained coolant loss as early replacement signals Pair with thermostat and belt inspection during scheduled service to extend cooling system lifecycle across aging fleets Sustained availability for older Bobcat models ensures your fleet stays operational well beyond thinning OEM support.

In Stock · MOQ 1 pc

View Details

Wear Item Water Pump With Gasket Compatible with Kubota V2203

25-37581-10 Water Pump with Gasket, compatible with Kubota V2203 — replacement for OEM cross-reference 15521-73030, 15521-73033, 15521-73035, 15521-73039. Fits excavators, loaders and tractors including R410, R510, L3350DT, KX151 and KX161-2 models. Scheduled replacement at coolant service intervals prevents thermal damage to the cylinder head and gasket, avoiding unplanned engine teardowns Bearing play and impeller erosion build up gradually; rising coolant temperatures across consecutive services signal approaching end of life Recommended replacement intervals provided with each shipment to support your fleet maintenance schedule.

In Stock · MOQ 1 pc

View Details

Water Pump SBA145017721 for Shibaura N844 – Fleet Supply

Water Pump SBA145017721 for Shibaura N844, aftermarket replacement with corrosion-resistant alloy impeller and nitrile rubber seals rated to 120°C — supports New Holland TC25 through TC55DA and Ford tractor series. Replace at scheduled intervals or when bearing noise, seal weeping, or reduced coolant flow appears; inspect thermostat, hoses, and belt tension during the same service window to avoid repeat downtime. Planned fleet stocking available with continued supply for older Ford 1720/1920 and Shibaura-powered machines.

In Stock · MOQ 1 pc

View Details

Sea Water Pump 21212799 3812519 | Scheduled Maintenance for Volvo Penta 4.3L 5.0L 5.7L

Sea Water Pump 21212799 3812519 for Volvo Penta 4.3L 5.0L 5.7L — replacement for raw-water cooling circuit on GL, GXi, OSi, Gi and CE engine variants. Plan replacement around impeller erosion and bearing seal wear before overheating cascades into hoses and heat exchangers Pair with raw-water hoses, thermostat and inspection of the heat exchanger during scheduled service Supersedes earlier casting numbers across multiple displacement platforms Lifecycle replacement guidance included with every shipment to align with your fleet maintenance schedule.

In Stock · MOQ 1 pc

View Details

Water Pump 1G772-73032 for Kubota V3307 – Scheduled Maintenance

1G772-73032 Water Pump for Kubota V3307 Engines — compatible with SVL75 loaders and M5040–M7060 tractors, cast iron housing. Replace proactively when coolant seepage or bearing noise appears to avoid costly head and block damage Schedule swap alongside thermostat and fan belt renewal to reduce repeat labor across fleet service windows Trusted for aging M-series tractors with continuous aftermarket availability and replacement interval guidance included.

In Stock · MOQ 1 pc

View Details

Sea Water Pump for Volvo Penta 4.3L 5.0L 5.7L – Service Part

21214596 Sea Water Pump, Double V Belt Pulley, Marine Grade — replacement for Volvo Penta 4.3L, 5.0L, and 5.7L marine engines operating in saltwater environments. Impeller erosion, bearing wear, and seal degradation typically signal replacement need well before overheating occurs. Proactive stocking ahead of peak season avoids lead-time delays when multiple vessels in a fleet approach service intervals simultaneously. Cross-references 3858229 and 3862487 for interchange verification. Older 4.3L and 5.0L platforms remain supported as factory availability narrows. Scheduled maintenance intervals and replacement guidance included with shipment Engine serial confirmation against compatibility list available before order ISO 9001 production and sourcing standards apply across all units

In Stock · MOQ 1 pc

View Details

Water Pump RE507604 RE545572 Replacement for John Deere Long-Life

Water Pump RE507604 RE545572 for John Deere 4024 / 5030 Engines, New Aftermarket — replacement for OEM cross-reference numbers RE507604, RE545572, RE545573, SE502114, SE502115, and RE18520. Compatible with John Deere skid-steers, loaders, and tractors including 304J, 324J, 5065M, 5095M, 332D, and 333D. Replacing the water pump during scheduled cooling system service helps avoid unplanned downtime and secondary heat damage — pair with thermostat and hose refresh for full system coverage. Bearing and seal wear progresses with service hours; stocking ahead for fleets sharing the 4024 / 5030 platform reduces emergency freight spend. Recommended replacement interval guidance ships with every order for fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Water Pump 4135550 Replacement for Deutz D2.9 Long-Life

Water Pump 4135550 Replacement for Deutz D2.9 / TD2.9 / TCD2.9 Engines — new aftermarket cooling component for scheduled fleet maintenance. Typical wear signs: bearing play, seal weep, impeller cavitation signal replacement before overheating cascades to head gaskets and cylinder liners Replacing thermostat, fan belts, and coolant in the same service window extends overall cooling-system reliability across mixed fleets Replacement interval guidance and fleet stocking recommendations provided with each order.

In Stock · MOQ 1 pc

View Details

Volvo Penta 3.0-5.7-Compatible Sea Water Pump – Fleet Supply

21214599 Sea Water Pump, New Aftermarket — compatible with Volvo Penta 3.0–5.7 marine engines including 5.0GXi, 5.7OSi and 4.3GXi series. Corrosion-resistant housing and balanced impeller built for sustained saltwater service Typical wear signs include impeller erosion, seal degradation and housing corrosion — schedule replacement before peak season to avoid unplanned dry-dock downtime Cross-reference interchange: 3812693, 3862482, 3857202 Replacement interval guidance included with every consignment to support your fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Water Pump 1E051-73036 for Kubota D722 D902 – Service Part

Water Pump 1E051-73036 for Kubota D722 and D902 engines, includes matching gasket 16871-73430 (cross-reference) — aftermarket service replacement for BX1880, RTV-X900, ZD1011 series and more. Fits machines across agricultural, landscaping, and utility vehicle fleets running Kubota D722 or D902 diesel engines Scheduled replacement at manufacturer-recommended intervals prevents overheating damage to cylinder heads and head gaskets, which are far costlier to repair than the pump itself Pair with gasket and coolant system seals in a single maintenance cycle to avoid repeat downtime from adjacent wear items Aged Kubota models remain continuously supported through our catalog — replacement cycle recommendations included with each order.

In Stock · MOQ 1 pc

View Details