Belts 2 - Heavy Equipment Parts | XUNPO Global Distribution

Drive Belt 154537-001 for Vermeer BC600XL Brush Chipper – Service Part

Drive Belt 154537-001 for Vermeer BC600XL Brush Chipper, 1545 mm pitch length, EPDM compound — replacement for scheduled maintenance on the BC600XL drive system. Edge cracking, glazing, or slippage under load signals the belt is nearing end of service life; replacing it during a planned window avoids unplanned downtime and protects pulleys and bearings from secondary damage. Inspecting tensioner and pulley groove condition at the same service interval reduces repeat teardowns. Recommended replacement intervals provided with shipment to support your fleet maintenance schedule Compatible with Vermeer BC600XL Brush Chipper across production serial ranges MOQ 1 piece, ISO 9001 production, 3–12 month warranty against manufacturing defects

In Stock · MOQ 1 pc

View Details

V-Belt Fan Belt 080109107 for Perkins 404C-22 – Scheduled Maintenance

V-Belt 080109107 for Perkins 404C-22, Chloroprene Rubber Compound — replacement for Perkins 404C-22, 404C-22T, and 104-22 engines. Plan replacement alongside tensioners, idler pulleys, and coolant service to avoid unplanned downtime Cracking, glazing, or tension loss signals scheduled swap time before overheating risk Scheduled maintenance intervals and fleet stocking guidance included with shipment.

In Stock · MOQ 1 pc

View Details

Wear Item 3 Groove Pump Drive Belt Compatible with Bobcat 753-7753

6660994 Pump Drive Belt — 3-groove EPDM rubber with aramid fiber reinforcement, 3×10×1550La, replacement for Bobcat 753, 763, 773, 7753 skid steer loaders. Scheduled replacement avoids hydraulic pump damage and unplanned fleet downtime Cracking, glazing, or fraying signals end of service life — inspect pulleys and bearings concurrently Ideal for rental fleet turnover and planned maintenance programs on aging Bobcat units Replacement interval recommendations ship with every order to support your maintenance schedule.

In Stock · MOQ 1 pc

View Details

Yanmar 3TNV70-Compatible V-Belt MIU13962 – Fleet Supply

MIU13962 V-Belt, EPDM Rubber + Reinforced Polyester Cord — replacement for Yanmar 3TNV70 and John Deere XUV590E / XUV825M / XUV835R series utility vehicles. Continuous heat resistance up to 150°C (302°F) reduces thermal hardening over extended service intervals Typical wear progression: surface glazing → edge cracking → cord exposure, signaling planned replacement before snap Align belt swap with tensioner and pulley inspection to avoid premature re-failure Recommended replacement intervals and fleet stocking guidance ship with every order.

In Stock · MOQ 1 pc

View Details

Deck V-Belt 130-0843 | Overhaul Grade for Toro & Exmark Mowers

130-0843 54" Deck V-Belt, replacement for Toro TimeCutter & Exmark Quest zero-turn mowers — high-modulus chloroprene rubber with polyester cord reinforcement. Plan replacement alongside idler pulleys, tensioners, and spindle bearings to avoid unscheduled downtime during peak mowing season Early wear signs include glazing, cracking, and loss of tension retention — inspect at each service interval Fits Toro TimeCutter SS 5425, MX 5075, SW 5425, MX 5475 and Exmark Quest QTE708GEM54100, QZS708GEM54200, QZS735GKC54200 series Replacement cycle recommendations ship with every order to support your fleet maintenance scheduling.

In Stock · MOQ 1 pc

View Details

Scheduled Maintenance Drive Clutch Belt J0D-G6241-00-00 – Fits Yamaha

J0D-G6241-00-00 Drive Clutch Belt — replacement for Yamaha Drive2 Gas Golf Cart (2017–2025), trapezoidal profile with aramid cord reinforcement. Fits CVT systems on Yamaha Drive2 fleets — cross-reference J0DG62410000 High-modulus chloroprene rubber, ±0.3 mm tolerance, ISO 9001 production Typical wear signs include surface cracking, glazing, and slippage under load. Inspect primary and secondary pulley faces during scheduled replacement intervals to catch secondary damage early. Replacement interval guidance included with shipment for fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Narrow V-Belt 0117-9565 – Service Part for Deutz 1011/2011

Narrow V-Belt 0117-9565 – 10 × 1125 mm replacement for Deutz 1011/2011 series engines, built to DIN 2215 with chloroprene compound and polyester cord reinforcement. Watch for cracking, glazing, or edge fraying — replacing before complete failure protects pulley bearings and driven accessories like alternators and water pumps. Fits BF4M2011, F3L1011F, F4L2011, and other 1011/2011 variants across quarry, municipal, and agricultural fleets. Recommended replacement intervals documented for your fleet maintenance schedule.

In Stock · MOQ 1 pc

View Details

Thermo King TriPac APU-Compatible Alternator Belt – Long-Life

Alternator Belt 78-1918 / 78-1543 for Thermo King TriPac APU, EPDM Compound, Multi-Ribbed — engineered for sustained grip under continuous thermal cycling in APU engine bays. Replacing this belt on schedule prevents voltage instability, battery drain, and downstream refrigeration faults; inspect tensioners and pulleys at the same service interval to avoid linked failures. Scheduled replacement intervals and fleet stocking guidance provided with each order.

In Stock · MOQ 1 pc

View Details

Belt for John Deere 3.9L–6.8L Engines – Service Part

R123307 Serpentine Drive Belt, Chloroprene Rubber Compound, –25°C to +110°C — replacement for John Deere 3029, 4039, 4045, 6068 engines (3.9L–6.8L platforms). Replace at scheduled service intervals to prevent cascading failure across water pump, alternator, and cooling fan Surface cracking, glazing, and groove deformation signal the planned swap point Wear part support continues for aging John Deere engine series past peak brand availability.

In Stock · MOQ 1 pc

View Details

Drive Belt 422280651/422280652 Replacement for Maverick X3 Long-Life

Drive Belt 422280651/422280652, UTV CVT Belt, 12.7 mm Tooth Pitch, Aramid-Reinforced EPDM — replacement for Can-Am Maverick X3 (2017–2021) and Defender HD8/HD10 (2016–2018) series. Typical wear signs include sidewall cracking, slippage under load, and inconsistent CVT response — replace on schedule to avoid clutch and bearing teardowns. Inspect primary and secondary clutches at each belt swap to catch secondary wear before it compounds. 24° tooth angle and ±0.15 mm tolerance ensure stable engagement across high-torque cycles. Replacement interval guidance and cross-reference sheet ship with every order.

In Stock · MOQ 1 pc

View Details

Polaris Ranger 1000 & Pro XD-Compatible Clutch Belt – Fleet Supply

3211218 Clutch Drive Belt, EPDM compound with aramid cord reinforcement — replacement for Polaris Ranger 1000 and Pro XD utility vehicles in fleet service. Scheduled CVT belt replacement at planned maintenance intervals prevents unplanned downtime and secondary clutch sheave damage Aramid tensile cords resist stretch under repetitive heavy-haul load cycles, preserving CVT ratio control through the service window EPDM formulation sustains engagement performance across -20°C to +55°C operating environments typical in quarry, ranch, and municipal fleet use Recommended replacement intervals and wear inspection guidance included with every shipment for long-term fleet planning.

In Stock · MOQ 1 pc

View Details

Drive Pump Belt 6736775 for Bobcat Loaders – Wear Item

6736775 Drive Pump Belt, 3-groove cogged design, 58.15 in. (1477 mm) length — replacement for Bobcat S130, S150, S160, S175, S185, S205, T140, T180, T190 and Toolcat 5600 loaders. Scheduled wear part in hydraulic drive systems; typical replacement aligns with major service intervals to prevent unplanned downtime and secondary pump damage Cogged profile reduces heat buildup under continuous-duty cycles, extending flex life versus standard rubber belts Inspect pulleys for groove wear when replacing — mismatched wear accelerates new belt failure Fleet replacement interval recommendations ship with each consignment for maintenance planning.

In Stock · MOQ 1 pc

View Details