Stop Solenoid

Engine Auxiliary Components

Fuel Stop Solenoid 16851-60014 for Kubota Tractor – Service Part

16851-60014 Fuel Stop Solenoid, 12V — replacement for Kubota BX25, GR2120, TG1860 and more tractor models. Typical coil and plunger wear shows as sluggish or intermittent engine shutdown; plan replacement before total failure to avoid unplanned fleet downtime. One reference covers extensive BX, GR, and TG series range, simplifying stocking for mixed-model fleets. Replace alongside inspection of wiring harness connectors and voltage output to address root-cause faults. Aging Kubota models remain in continuous supply, supporting long-term fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Throttle Solenoid P12972 Replacement for Niftylift Lifts Scheduled Maintenance

P12972 Throttle Solenoid, 12V — replacement for Niftylift TD34, SD34, HR17D and compatible aerial platforms. Cross-reference 1502ES-12C7U1B1 and ES1502C-12V T20. Erratic throttle response or sudden engine stall often signals solenoid wear approaching service limits Scheduled replacement during major inspections reduces unplanned downtime and supports fleet uptime budgeting Inspect linked engine control components when swapping the solenoid to avoid repeat failures Replacement interval guidance included with shipment for long-term fleet planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Fuel Stop Solenoid 2852741 | Overhaul Grade for New Holland J600

Fuel Stop Solenoid 2852741, 12V, New Aftermarket — replacement for New Holland F4CE9484C J600 and F4CE9484L J600 engines. Proactive replacement during scheduled service intervals prevents unexpected shutdown failures; intermittent stalling, rough engine cutoff, or no-start conditions often signal coil or plunger wear nearing end of service life. Inspect the broader fuel shutoff circuit alongside solenoid replacement to address root-cause faults rather than symptoms alone. 3–12 month warranty covers manufacturing defects, supporting fleet maintenance budget planning. Replacement interval recommendations included with shipment to support your scheduled maintenance program.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Fuel Stop Solenoid Valve for Thermo King TK – Service Part

41-9100 Stop Solenoid, 12V — aftermarket fuel shutoff valve compatible with Thermo King TK, SLXi, T-Series, PRECEDENT, TriPac APU and transport refrigeration series. Typical wear signs include erratic engine shutoff or failure to cut fuel on shutdown after extended continuous-duty runs Replace alongside fuel filters and electrical connectors during scheduled fleet service to avoid reactive downtime Legacy unit support maintained for older TK series where brand parts availability is declining Planned stocking across fleet units eliminates emergency procurement cycles Replacement interval guidance included with shipment for maintenance scheduling.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Stop Solenoid for Kubota D722 D782 D902 – Service Part

1G820-60022 Stop Solenoid, 12V, Sealed Brass Valve Body — replacement for Kubota D722, D782, and D902 engines used in excavators, skid steers, and compact equipment. Typical failure begins with coil burnout or spring fatigue from prolonged heat cycling, often discovered only when the engine refuses to shut down during routine checks. Stocking ahead of predictable service intervals prevents emergency downtime across fleet units running similar duty cycles. - Replacement intervals and fleet stocking recommendations included with every shipment.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Scheduled Maintenance Stop Solenoid – Fits Hyundai R130 R170

3991167 SA-4941-12 Stop Solenoid, 12V for Cummins 4BT — planned lifecycle replacement for Hyundai R130 and R170 excavators experiencing electrical cycling wear and vibration-related degradation. Schedule alongside fuel filter and fuel line service to avoid repeated system access. Aging fleet units benefit from stocked spares rather than reactive sourcing. Fits Hyundai R130 / R170 with Cummins 4BT engines OEM reference 3991167, SA-4941-12 (cross-reference only) 3-12 month warranty against manufacturing defects Replacement interval guidance ships with every order to support fleet maintenance scheduling

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Stop Solenoid SBA185206083 – Scheduled Maintenance for Shibaura N844

12V Stop Solenoid SBA185206083 for Shibaura ISM N844 Engines — a scheduled-maintenance electrical component in the engine auxiliary system of compatible New Holland and Shibaura tractors. Replace during planned service intervals or when symptoms include erratic shutdown, failure to cut fuel, or coil degradation from voltage fluctuation Fits Boomer, T-series, TC-series, TZ-series, Workmaster and additional compact tractor models sharing the N844 platform Single-component swap recommended alongside broader electrical system inspection at each service cycle Older tractor models remain continuously supported with verified cross-reference compatibility (185206080, SBA185206085 interchange reference).

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Stop Solenoid SA-4026-12 for Cummins 5.9L 8.3L – Fleet Supply

Stop Solenoid SA-4026-12 for Cummins 5.9L 8.3L & Ford F700 F800, 12V, Nickel-plated valve body — replacement for fleet preventive maintenance schedules on construction and municipal trucks. Replace when symptoms include intermittent shutoff lag, coil resistance drift, or seal degradation in high-temperature environments. Decide between single-component swap or full fuel shutoff assembly exchange based on correlated wear on injectors and fuel lines. Stocking strategy: align spare quantity with fleet size and duty cycle to cover predictable consumption on aging Cummins platforms. Continued supply for older 5.9L and 8.3L engines — replacement interval recommendations included with shipment.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Fuel Shut Off Solenoid J904630 for CASE – Fleet Supply

J904630 Stop Solenoid, 12V — replacement for CASE and Cummins engine platforms covering loaders, tractors and harvesters. Typical failure signs include weak coil engagement, hardened seals and intermittent connector dropouts, making this a key item to schedule into preventive maintenance cycles rather than wait for a no-shutdown event. Pair replacement with a fuel filter and relay check to address root causes, and stock by fleet service interval to avoid emergency single-piece orders on aging machines. Maintenance interval guidance and long-term availability for legacy CASE models included with each shipment.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Fuel ShutOff Solenoid AM882277 for John Deere 670-1070 – Fleet Supply

Fuel ShutOff Solenoid AM882277, 12V Stop Solenoid — compatible with John Deere 670, 770, 870, 970, 1070 compact utility tractors for agricultural and landscaping fleet operations. Coil insulation breakdown and sluggish plunger return are early indicators before complete shutdown failure Proactive stocking eliminates unplanned downtime and compounding schedule losses across mixed-fleet units Single-component replacement during the same service window as wiring harness and relay inspection AM882277 cross-reference interchange reference: AM876416, P610-C5V12 Replacement interval recommendations included with shipment to support planned maintenance records

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Scheduled Maintenance Stop Solenoid 6681513 – Fits Bobcat 753 S160

6681513 Stop Solenoid, 12V — replacement for Bobcat skid steer loaders and compact excavators including 751, 753, S160, and 337 models. Coil degradation and intermittent shutdown typically signal approaching end of service life, making this a planned maintenance item rather than a reactive emergency order. Stocking ahead of scheduled intervals keeps fleet uptime predictable and avoids costly single-machine downtime. ISO 9001 quality standard with 3–12 month warranty Replacement interval guidance included with shipment for lifecycle planning

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Fuel Shut Off Solenoid 425-35925 for Gehl Mustang – Service Part

425-35925 Stop Solenoid, 12V, for Gehl & Mustang Skid Steer Loaders — replacement for OEM reference 425-35925 (cross-reference only), supporting Yanmar-powered units across multiple SL and 2000-series models. Typical failure signs include intermittent shutdowns and delayed fuel cut-off under high-vibration conditions. Replacing the solenoid at planned service intervals avoids reactive downtime; inspect fuel lines, filter, and pump seals during the same maintenance window to protect overall fuel system integrity. Replacement interval recommendations included with shipment to support fleet maintenance planning.

In Stock · MOQ 1 pc

View Details