Stop Solenoid

Engine Auxiliary Components

Fuel Shut-Off Solenoid AM882277 for John Deere 670-1070 – Service Part

AM882277 Fuel Shut-Off Solenoid 12V DC, <35 ms Response Time — compatible with John Deere 670, 770, 870, 970, and 1070 compact utility tractors as a planned service part. Class H insulation handles continuous duty and seasonal thermal cycling, while NBR O-ring seals meet SAE J2044 diesel compatibility for extended intervals. Stocking this solenoid before failure turns reactive downtime into a quick scheduled swap during pre-season fleet maintenance. Cross-reference: AM876416, P610-C5V12 (interchange reference only) Replacement interval guidance supplied with shipment for your maintenance planning

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Shutoff Solenoid Valve 6681513 – Scheduled Maintenance for Bobcat Skid Steer

12V Stop Solenoid Valve 6681513 — compatible with Bobcat skid steer loaders 751, 753, 763, S150, S185 and excavators 325, 331, 337 (cross-reference only). Class H insulation (180°C) and Viton O-ring seals handle high-heat duty cycles in mining and demolition environments Typical replacement trigger: erratic engine shutdown, run-on after key-off, or intermittent solenoid click during scheduled maintenance intervals Replacement cycle recommendations based on your fleet's operating hours and environment are included with every shipment

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Fuel Shut-Off Solenoid 425-35925 for Yanmar Engines – Scheduled Maintenance

Long-term supply commitment maintained for aging Yanmar-powered platforms.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Stop Solenoid D610-B1V12 for Kubota WG750 DF752 – Service Part

Stop Solenoid D610-B1V12 for Kubota WG750 / DF752, 12V DC Dual Coil — replacement for engines in compact construction and agricultural equipment with frequent restart cycles. Treat this solenoid as a scheduled wear item: sluggish shut-off response, intermittent engagement under voltage drop, or visible contact arcing after high-cycle use all signal replacement before unplanned downtime hits your fleet. Fits Kubota WG750, DF752, DF-750, DF972, D905 Dual coil (pull-in + hold-in), 2-terminal, IP54 rated MOQ 1 piece, 6-month warranty against manufacturing defects Replacement interval guidance aligned with actual cycle counts ships with every order.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Fuel Shutdown Solenoid 119233-77932 – Fleet Supply for Yanmar 3TNE84

Inspection and replacement cycle recommendations included with shipment

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Pull Solenoid P610-B1V12 | Fleet Supply for Excavators

P610-B1V12 Stop Solenoid, 12V DC Pull-Type, Class H Insulation — replacement for Trombetta P610-B1V12 (cross-reference only), compatible with CAT, Komatsu, Volvo excavators, loaders, bulldozers, and agricultural harvesters. Planned replacement at recommended service intervals prevents unplanned engine stalls and cascading hydraulic shock on fleet machines. Single-component swap versus full fuel shutoff assembly exchange depends on operating hours and actuation cycle count. Nickel-plated plunger shaft and stress-relieved stainless spring resist thermal drift across quarry, port, and mining environments. Fleet maintenance teams receive a replacement interval recommendation sheet with each consignment to support lifecycle planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Stop Solenoid 1502-12A2U1B2 for Woodward 12V Engine Shutdown Control – Fleet Supply

1502-12A2U1B2 Stop Solenoid, 12V DC Shutdown Control — aftermarket replacement for Woodward systems, featuring IP67 sealing and nickel-plated construction for harsh mining, marine and industrial environments. Typical replacement is triggered by sluggish shutdown response or coil degradation spotted during scheduled safety audits. Planning a spare ahead of predictable wear avoids unplanned fleet downtime and keeps emergency stop circuits compliant. Cross-reference: 1500-2114 (interchange reference only) Tested to SAE J1455 vibration standard Suggested replacement intervals provided with shipment

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Kawasaki-Compatible Stop Solenoid M138477 – Fleet Supply

M138477 Stop Solenoid, 12 VDC, Class H insulation — compatible with Kawasaki FD611V/FH531V engines and John Deere 325, 335, 345, X540, Gator series. Replace proactively at scheduled service intervals before erratic cutoff or coil burnout causes unscheduled fleet downtime. Single-component swap avoids full fuel system teardown. Fits 20+ utility tractor and Gator models FKM fluoroelastomer seal resists biodiesel degradation Hard-chrome plunger shaft for high-vibration durability 6-month warranty, MOQ 1 piece Replacement cycle guidance included with every shipment to support your fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Fuel Stop Solenoid 16851-60014 – Fleet Supply for Kubota ZD Mowers

16851-60014 Stop Solenoid, 12V DC, IP67 Sealed — replacement for Kubota ZD18, ZD21, ZD321 zero-turn mowers. Coil insulation degrades and plungers bind after hundreds of start/stop cycles in wet mowing conditions; scheduling replacement before peak season avoids mid-job failures. Stainless steel plunger with hardened surface reduces binding in the brass bore over service life. Fits ZD18, ZD18F, ZD21, ZD21F, ZD221, ZD321, ZD321N, ZD323 Cross-reference: 052600-4530, 052600-4531, 16851-60010, 16851-60012 Suggested replacement intervals included with shipment to support fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Fuel Injection Shutoff Solenoid Service Part for Perkins John Deere

12V Stop Solenoid, RE62240 / RE37089 / AR90340 cross-reference, IP65 sealed — replacement for Perkins 1004/1006 and John Deere 4239/6466 series engines. Typical failure signs: intermittent shutdown, hard starting, then no-start as coil insulation degrades under thermal cycling Single-part swap before pump damage occurs; Class H (180°C) winding and nickel-plated brass housing support repeated duty cycles Fits GM/Ford 4.3L–7.3L mechanical fuel pump applications Replacement interval guidance included with every shipment to support your fleet maintenance schedule.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Fuel Stop Solenoid 16851-60014 for Kubota RTV900 – Service Part

16851-60014 Fuel Stop Solenoid, 12V DC, Stainless Steel Plunger — compatible with Kubota RTV900 series including G, R, T, W, and XT variants for utility and agricultural fleet use. Scheduled replacement during service intervals prevents unplanned shutdowns and supports safe engine restart under load Pair inspection with fuel filters and line seals to address root causes of solenoid coil failure Cross-reference numbers 052600-4530, 052600-4531, 16851-60010 verified for interchange fitment Continuous supply for older RTV900 generations maintains long-term fleet uptime Replacement cycle recommendations included with every shipment to align with your maintenance planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Stop Solenoid for Cummins 4BT 6BT – Scheduled Maintenance Service Part

Stop Solenoid 3930658, 12V, <45 ms Engagement — compatible with Cummins 4BT and 6BT engines as a planned maintenance replacement for the auxiliary shutdown system. Typical failure signs include coil insulation degradation and return spring fatigue, causing intermittent shutdown behavior before complete loss Single-component replacement is suitable when the fuel shutoff valve body and linkage remain within tolerance Forward stocking across service intervals reduces unplanned downtime for fleets operating multiple 4BT/6BT-powered machines Cross-reference verified against 3932529 and SA-4756-12, with replacement interval guidance supplied per consignment.

In Stock · MOQ 1 pc

View Details