Fuel System 5 - Heavy Equipment Parts | XUNPO Global Distribution

Vacuum Fuel Pump 808492 808656 – Scheduled Maintenance Service Part

Vacuum Fuel Pump 808492 808656, 1/4 inch Fuel Line, Vacuum Type — replacement for Briggs & Stratton, Craftsman, and White Outdoor horizontal engines used in generators, zero-turn mowers, and agricultural equipment. Diaphragm degradation from ethanol-blended fuel typically shows as hard cold starts or uneven idle before complete delivery failure — scheduling replacement ahead of this point avoids carburetor contamination and broader fuel system teardowns Fuel lines, inline filters, and carburetor needle and seat should be inspected on the same service interval to prevent repeat failures from adjacent wear items Stocking fewer consolidated SKUs across cross-reference numbers (interchange reference 491922, 692313, 24 393 04-S, 16700-Z0J-003 and others) simplifies inventory for mixed fleets ISO 9001 production with 3–12 month warranty against manufacturing defects Replacement interval recommendations and cross-reference verification documentation ship with every order to support your fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Fuel Pump RE68345 for John Deere Engines – Scheduled Maintenance

Fuel Pump RE68345 (cross-reference), replacement for John Deere 3029/4039/4045/6068 engines — a predictable wear component in the fuel delivery chain for tractors, harvesters, and forestry machines including 7410, 7710, 7810, and 1175H models. Plan replacement around filter change intervals and fuel quality history to avoid mid-season downtime Single-component swap or full fuel system refresh depends on machine hours and duty cycle Adjacent seals, lines, and filters share contamination risk — inspect upstream when pump wear appears Replacement cycle guidance ships with your order, supporting aging fleet maintenance planning across mixed John Deere equipment.

In Stock · MOQ 1 pc

View Details

12V Electric Fuel Pump AM876265 for John Deere Gator – Fleet Supply

AM876265 12V Electric Fuel Pump, 40–60 psi — replacement for John Deere Gator 4X2, 4X4, HPX, 6X4 series and Kawasaki FD620D / FD750D engines. Early signs of pump wear include cold-start hesitation, stall under load, and fuel pressure dropping below specification — scheduling replacement at these indicators prevents unplanned downtime across the fleet. Designed for continuous-duty operation in high-temperature worksite conditions with a direct-fit electrical connector matching the factory harness. Compatible with Yanmar 3TG72 applications and multiple Gator variants including Trail, Worksite, and Diesel models. Interchange reference: AM109405, AM876023. Fleet maintenance schedules supported with older Gator models continuously supplied and replacement interval guidance included with shipment.

In Stock · MOQ 1 pc

View Details

Service Part Fuel Injector Pump KM186FGET-12000 – Fits Yanmar L48N L48V

KM186FGET-12000 Fuel Injector Pump — replacement for Yanmar L48N, L48V, L100 and Kipor KDE6500T/KDE6700T generator engines, new aftermarket condition with 3–12 month warranty. Plan pump replacement at service intervals to prevent hard starting, uneven idle and secondary injector damage Single-component swap avoids full fuel system overhaul when degradation is isolated to the pump Stock ahead of predictable consumption across mixed fleets running 186F and L-series platforms Lifecycle maintenance guidance and replacement interval recommendations included with every shipment.

In Stock · MOQ 1 pc

View Details

Fuel Injector 16001-53904 | Overhaul Grade for Kubota D722 D902

Recommended replacement intervals documented with each shipment for long-term fleet planning.

In Stock · MOQ 1 pc

View Details

Fuel Pump Assembly 2521307 | Service Part for Polaris Ranger 570 900 XP Crew

Fuel Pump Assembly 2521307, Replacement for Polaris Ranger 570 / 900 XP — service-grade component for utility vehicle fleets operating across construction, agricultural, and off-road environments. Replace during scheduled fuel system service to prevent pressure drop, hesitation under load, and intermittent stalling before complete failure Inspect fuel filter, tank pickup screen, and electrical connectors at the same interval to extend component life across mixed Ranger fleets Recommended replacement interval documentation provided with shipment for fleet maintenance planning

In Stock · MOQ 1 pc

View Details

Fuel Injector 1J808-53050 for Kubota D1803 V2403 – Scheduled Maintenance

Fuel Injector 1J808-53050 for Kubota D1803 & V2403 — replacement for wheel loader R430 and R430CA applications, new aftermarket condition. Plan injector replacement as a matched set alongside fuel filters and return lines to prevent recurring downtime and protect pistons from imbalanced combustion across cylinders. Typical wear signs include nozzle tip erosion, rising fuel consumption, and rough idle before outright failure. Confirms engine serial variants including D1803-CR-TIE4B-KEA-1 and V2403-CR-TIE4BG-KEA1, with replacement interval guidance provided per shipment.

In Stock · MOQ 1 pc

View Details

Wear Item Fuel Injector Compatible with Kohler KDI1903TCR KDI2504TCR

ED0050101680-S Fuel Injector compatible with Kohler KDI1903TCR and KDI2504TCR engines, new aftermarket condition with ISO 9001 manufacturing standards Plan replacement around scheduled service intervals — rough idle, rising fuel consumption or visible exhaust smoke signal end of injector service life Replace as a matched full-engine set to maintain balanced combustion and avoid accelerated wear on remaining units Lifecycle replacement guidance and interval recommendations included with every consignment for your KDI fleet planning

In Stock · MOQ 1 pc

View Details

1J801-53052 Fuel Injector – Scheduled Maintenance for Kubota V2403

1J801-53052 Fuel Injector for Kubota V2403 and D1803 engines, New Aftermarket condition — replacement for OEM reference 1J801-53052 (cross-reference only). Replace injectors on schedule at early signs of rough idling, uneven power delivery, or increased fuel consumption to avoid cascading damage to pistons and cylinder heads Evaluate fuel lines, return hoses, and injector seals at the same service interval; plan single-cylinder or full-set replacement based on engine balance requirements Fits KX040-4, U48-5, L3301DT through L6060HSTC, MX4800DT through MX6000HSTC, and M5660SUH platforms Older Kubota engine variants remain in steady supply for long-term fleet support.

In Stock · MOQ 1 pc

View Details

Fuel Injector for Doosan D24 Bobcat T450 – Service Part

400903-00074D Fuel Injector, complete assembly flow-rate tested for Doosan D24 and D18 engines, replacement for Bobcat T450 through T650 compact track loaders. Replacing injectors as a matched set during scheduled overhauls prevents cylinder-to-cylinder imbalance and secondary damage to piston crowns Early wear indicators include rough idle, elevated fuel consumption, and diagnostic-flagged contribution variance across cylinders Plan adjacent consumables together: return line seals, fuel rail O-rings, and upstream filters to protect new injectors from contamination Fleet-level replacement interval recommendations included with each consignment to support proactive maintenance planning.

In Stock · MOQ 1 pc

View Details

Crankcase Breather Intake Line Assembly 270-090-07-00 – Service Part for Mercedes-Benz M270

Crankcase Breather Intake Line Assembly 270-090-07-00 — aftermarket replacement for Mercedes-Benz M270 2.0L engines, compatible with GLA250 X156, CLA250 C117, A-Class W176, and B-Class W246 platforms. Routes blow-by gases from crankcase to intake, maintaining pressure balance under sustained operation Rubber and plastic joints degrade over time; typical wear signs include hardened tubing, oil seepage at connections, and rough idle Scheduled replacement during fleet maintenance avoids unplanned downtime and secondary seal damage Inspect PCV valve and adjacent intake hoses when swapping this line M270 platform vehicles are entering mid-to-late service life, and this part remains in steady supply for ongoing fleet support.

In Stock · MOQ 1 pc

View Details

Fuel Injector 1J770-53050 Compatible with Kubota V3307 – Scheduled Maintenance

1J770-53050 Fuel Injector Set (4 pieces) compatible with Kubota V3307, V3307-CR-TE4 Tier 4 engines — replacement for excavators, tractors and loaders including KX080-4, M7060HD, SSV75 and SVL75-2. Plan full-set replacement during scheduled service intervals to maintain even fuel delivery across all cylinders and prevent uneven wear on Tier 4 emissions components. Early signs such as rough idle, rising fuel consumption or increased exhaust smoke signal that injector lifecycle servicing is due. Cross-reference numbers include 1J770-53070, 1J770-53074 and 295050-1980 (cross-reference only) — verify engine serial and Tier variant before ordering. Replacement interval guidance included with shipment to support your fleet maintenance planning.

In Stock · MOQ 1 pc

View Details