Belt Drive Systems

Belt Drive Systems

Belt Tensioner Pulley 7269057 for Bobcat Loader – Fleet Supply

Belt Tensioner Pulley 7269057, forged 40Cr steel housing, SPZ groove profile — compatible with Bobcat A770, S630, S650, S750, S770, S850, T630, T650, T750, T770, T870 skid steer and compact track loaders. Watch for bearing noise, uneven belt wear, or tension loss under thermal cycling as early replacement indicators Planned swap prevents cascading damage to belts, fan drives, and cooling components across your fleet Cross-reference 7141788 (interchange reference only) Replacement interval guidance included with every shipment to support long-term fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Belt Set 78-1341 78-603 78-629 – Fleet Supply for Thermo King SB

Belt Set 78-1341 78-603 78-629 – Thermo King SB Series, 3-Piece Drive Belt Kit — includes alternator belt (78-1341), fan belt (78-603), and engine/idler belt (78-629) for SB 100 through SB 400 and Spectrum DE refrigeration units. Replacing all three belts as a matched set at scheduled intervals prevents staggered failures and cumulative downtime across cold-chain fleets Progressive wear signs — cracking, glazing, rib separation — typically appear as operating hours accumulate in continuous refrigeration duty Replacement interval recommendations ship with each order to support long-term fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

V-Belt 32993 for Earthquake Rear Tine Tiller – Service Part

V-Belt 32993, 4LX Profile, 670 mm Length — replacement for Earthquake rear tine tillers, built with high-strength rubber and polyester tensile cords for reliable power transmission. Inspect belt for cracking, cord stretch, and edge fraying at scheduled intervals; replace before catastrophic failure to protect pulleys and avoid mid-season downtime Plan seasonal stock around operating hours and soil conditions; predictable wear supports batch ordering ahead of peak demand Replacement interval guidance and compatibility confirmation provided with every shipment.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Belt Tensioner 3976834 3957434 – Fleet Supply for Cummins ISBE6.7 6CT

Belt Tensioner 3976834 3957434 — replacement for Cummins ISBE6.7, 6CT, 6BT5.9 engines, high-strength gray iron housing, dual-lip NBR seal rated to 120°C. Typically swapped alongside the serpentine belt at scheduled service intervals; spring force degrades over thermal cycles, causing belt flutter and accelerated pulley wear Induction-hardened pivot shaft (HRC 52–56) supports multiple replacement cycles without housing refurbishment IP65 dust protection suits mining, construction, and high-vibration environments Replacement interval guidance included with shipment to support fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Timing Belt Installation Pin 02992037 for Deutz Engine 1011 – Scheduled Maintenance

Timing Belt Installation Pin 02992037, replacement for Deutz 1011/2011 engines, 8.99 mm shaft diameter, HRC 58–62 hardness Fits Bobcat T200, S250, A220, A300, 863, 873, 883 skid steer loaders Worn pins drift out of tolerance and cause belt misalignment, typically replaced during scheduled timing belt service or engine overhaul intervals Single-pin replacement available without full kit exchange, depending on engine service history and adjacent component condition Supports fleet-level stocking across multiple Deutz-powered machines for predictable maintenance planning Replacement interval recommendations included with shipment to support your overhaul scheduling.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Scheduled Water Pump Belt 78-1492 – Fits Thermo King TK249 T-600

Water Pump Belt 78-1492 for Thermo King TK249, T-600, T-800, EPDM compound with aramid tensile cord rated above 120°C sustained surface temperature. Replacement for Thermo King T-series, MD-series, TS-series, and TriPac APU refrigeration units Typical wear signs include rib face cracking, surface glazing, and cold-start squeal under thermal cycling Inspect tensioner and idler pulleys during belt change — seized bearings are a leading cause of premature failure Low-cost, high-impact consumable best pre-positioned at depot level to prevent cargo loss from unscheduled downtime Suggested replacement intervals included with shipment to support your fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

6735884 Belt Tensioner Pulley for Bobcat T140 T180 – Fleet Supply

6735884 Belt Tensioner Pulley, Forged Carbon Steel (AISI 1045), HRC 58–62 Induction Hardened — compatible with Bobcat T140, T180, T190, T550, T590 Compact Track Loaders. Typical wear signs include squealing, belt slippage, and pulley misalignment; replace at scheduled service intervals before bearing failure damages the belt and cooling circuit. Interchange reference: 6711698 (cross-reference only). Recommended replacement intervals and wear guidance shipped with each order.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

J911559 Fan Belt | Scheduled Maintenance for CASE Loader 40XT 70XT

J911559 Fan Belt for CASE 40XT, 70XT Loaders, High-Tensile Synthetic Rubber — replacement for scheduled cooling system maintenance across CASE and New Holland loader, tractor, and motor grader fleets. Watch for surface cracking, glazing, or edge wear as indicators to replace before snap failure damages the water pump or head gasket Fits models including 1840, 1845C, 580SK, 90XT, 1150E, and 850K under cross-reference numbers J911559A, 90500580, and 73162121 Plan belt stock around your fleet's service intervals and operating environment to avoid reactive downtime Recommended replacement intervals and inspection guidance for adjacent cooling components ship with every order.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Drive Clutch Belt J0D-G6241-00-00 for Yamaha Drive2 – Service Part

J0D-G6241-00-00 Drive Clutch Belt, Aramid-Reinforced, 22.5° V-Angle — replacement for Yamaha Drive2 gas golf carts (2017–2025). Typical wear signs include slippage, hesitation under acceleration, and chirping noise from the CVT housing. Replacing the belt on a scheduled interval avoids secondary clutch sheave damage and keeps fleet turnaround predictable. Aramid reinforcement maintains dimensional stability across repeated heat cycles in stop-start duty. Fits Yamaha Drive2 gas models 2017 through 2025 ±0.3 mm dimensional tolerance for consistent sheave engagement Planned replacement supports aging fleet life extension Suggested service intervals and fleet stocking guidance provided with each order.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Water Pump Belt 50-00162-25 Replacement for Carrier Vector – Fleet Supply

Water Pump Belt 50-00162-25, EPDM Compound with Aramid Tensile Cords — replacement for Carrier Vector X4, X2, and Supra series refrigeration units. Scheduled belt replacement prevents cargo loss and cascading compressor damage during sustained high-ambient operations. Typical wear signs include cracking, glazing, and rib elongation preceding sudden failure. Plan belt changes alongside tensioners and pulleys to consolidate service intervals. Cross-reference: 50-00162-20, 50-60288-21, CA-50-00162-25-AM Recommended replacement intervals provided with shipment for fleet maintenance planning

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Narrow V-Belt 0117-9565 – Service Part for Deutz 1011 2011

Narrow V-Belt 0117-9565, 10×1125 mm, EPDM Compound — replacement for Deutz 1011/2011 series engines including BF4M2011, F3L1011F, F4L2011 and related variants. Scheduled belt replacement at recommended service intervals prevents unplanned cooling and charging system failures, while visible cracking or sidewall fraying signals immediate attention is needed. Fits Deutz-powered excavators, generators, crushers and compactors Withstands continuous operation up to 120°C per ISO 4184 and DIN 2215 Minimum order 1 piece for emergency or planned maintenance Replacement interval recommendations ship with each order to support fleet maintenance scheduling across aging Deutz platforms.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Alternator Belt 78-1918 78-1543 | Overhaul Grade for TriPac APU

78-1918 78-1543 Alternator Belt, 8-rib EPDM — replacement for Thermo King TriPac APU auxiliary power units, cross-reference interchange for scheduled fleet maintenance. Replace at planned service intervals alongside tensioner and pulley inspection to prevent cascading alternator undercharge and cold-chain risk Aramid-reinforced tensile cord maintains <2.5% elongation across APU duty cycles, reducing glaze and crack progression between overhaul checkpoints Replacement interval guidance ships with each consignment to align with your fleet maintenance schedule.

In Stock · MOQ 1 pc

View Details