33 Products Available

Push Rod

Quality aftermarket parts for CAT, Komatsu, Hitachi, Volvo, Hyundai & more. MOQ 1 piece -- ships in 2-5 days.

Get a Quote WhatsApp

Showing 1-12 of 33 products

MOQ 1 Piece Ships 2-5 Days

02109085 Push Rod for Deutz D2011L02 & F2L2011 – Service Part

02109085 Push Rod, High-Carbon Alloy Steel, 225 mm Length — replacement for Deutz D2011L02, F2L2011, and 20+ engine models in the 1011/2011 series. Typical wear signs include valve lash drift and audible ticking from the valve train, signaling scheduled inspection Plan push rod replacement alongside tappets and rocker arms to avoid cascading failures during overhaul Fits Deutz-powered construction generators, quarry loaders, and marine auxiliary engines across aging rental and contractor fleets Sustained supply for older Deutz series ensures your maintenance program stays on schedule.

In Stock · MOQ 1 pc
View Details

Push Rod 31434307 for Perkins 1004-40T – Service Part

Push Rod 31434307 for Perkins 1004-40T, Forged 42CrMo Steel, ≥900 MPa — compatible with 40+ Perkins engine variants across CASE, Landini, New Holland, and Kobelco equipment. Typical inspection at top-end service intervals; replace as a matched set when tip wear or straightness deviation exceeds tolerance to avoid cascading valve train damage. Stock ahead of predictable consumption on aging fleets. Replacement cycle guidance included with shipment for fleet planning MOQ 1 piece, ISO 9001 production

In Stock · MOQ 1 pc
View Details

Push Rod Cover & Gasket Kit for Cummins 4BT – Service Part

5365772 Push Rod Cover & Gasket Kit for Cummins 4BT/4B3.9, cold-rolled steel cover with NBR gasket rated to 120°C continuous service. Replace at scheduled intervals before seepage causes oil pressure warnings or valvetrain contamination Assess whether adjacent fasteners and crankcase breather need concurrent inspection during gasket renewal Sourced supply under ISO 9001 with 6-month warranty, one-piece MOQ for mixed fleet stocking Planned replacement intervals documented and supplied with every consignment for fleet scheduling

In Stock · MOQ 1 pc
View Details

Push Rods 02109085 for Deutz D2011L02 – Scheduled Maintenance

02109085 Push Rod Set (8 pcs) for DEUTZ D2011/F2L2011 series, high-carbon alloy steel with precision-ground ends. Fits D2011L02 through BF4M1011F engines used in quarry, port and mining equipment. Replace during scheduled valvetrain service — worn push rod ends or valvetrain noise signal inspection time Replacing the full set avoids uneven load on cam lobes and tappet bores, preventing secondary damage across the block assembly Supports lifecycle planning for aging DEUTZ 2011 engines where OEM availability is thinning Recommended replacement intervals and service records included with each shipment.

In Stock · MOQ 1 pc
View Details

Push Rod 733817M1 for Massey Ferguson Tractors – Service Part

Push Rod 733817M1, SAE 1045 Forged Steel — compatible with Massey Ferguson 165, 275, 290, 390 tractors and Perkins 4.236, 4.248, 6.354 diesel engines. Planned replacement part for valve train service intervals Inspect at each major overhaul; replace with tappets and rocker arms when wear transfers across mating surfaces Supports aging MF and White fleet continuity past thinning brand parts availability Replacement interval guidance and cross-reference sheet ship with every order for fleet maintenance planning.

In Stock · MOQ 1 pc
View Details

Push Rod 31434307 for Perkins 1004-40T – Long-Life Service Part

Push Rod 31434307 for Perkins 1004-40T, high-strength alloy steel (SAE 5140), induction-hardened contact ends — compatible with CASE C100, Landini 6500–9880 series, and Kobelco 700–900 equipment. Replace at scheduled valve train service intervals when end pitting or length deviation appears, preventing unplanned valve-to-piston contact and protecting downstream components Inspect tappets, rocker arms, and valve springs at each push rod cycle; single-component replacement is viable when camshaft lobes and guide bores remain within tolerance Replacement interval guidance and legacy engine variant support included with every consignment.

In Stock · MOQ 1 pc
View Details

Timing Belt Kit with Push Rods for Deutz 1011 – Service Part

02929933 Timing Belt Kit with Push Rods, Aramid-reinforced HNBR Belt, C45 Steel Rods — replacement for Deutz 1011 and Bobcat skid steer engines including F2L1011 through BF4M1011F variants. Replacing the belt, push rods, and timing pins as a matched set at scheduled intervals prevents cascading valve-train damage and keeps fleet maintenance predictable. Typical triggers include belt stretch beyond spec, push rod runout, and timing pin wear affecting synchronization. Inspect tensioner condition and cam surfaces while the timing cover is open. Recommended replacement intervals documented and shipped with every order for your maintenance records.

In Stock · MOQ 1 pc
View Details

Cummins 4BT-Compatible Push Rod Cover & Gasket – Fleet Supply

5365772 3283767 Push Rod Cover & Gasket Kit, A380 aluminum alloy cover with multi-layer steel gasket, ±0.15 mm tolerance — compatible with Cummins 4BT, 4B3.9, B3.9 G, B3.9 CM2620, and B171C engines. Hardened gasket or oil seepage around the valve train area signals replacement time; swap the cover and gasket together to avoid repeat teardowns and protect adjacent rockers and push rods from contamination. Fits engines in excavators, generators, and mining haul trucks where predictable sealing supports planned service intervals across the fleet. Replacement interval guidance included with shipment to help align your maintenance scheduling for older B3.9 series engines.

In Stock · MOQ 1 pc
View Details

Push Rod 733817M1 for Massey Ferguson – Wear Item

Push Rod 733817M1 for Massey Ferguson Tractors & Combines, Forged SAE 1045 Steel, Phosphate Coated — replacement for valvetrain maintenance across 50+ Massey Ferguson, Oliver, and White models including MF 275, 390, 3090, and 3650. Scheduled replacement during engine overhaul prevents valve lash drift, abnormal noise, and fatigue cracking that damages lifters, rocker arms, and valves Planned stocking of this wear item supports aging fleet lifecycle extension and avoids reactive downtime from catastrophic valvetrain failure Suggested service intervals and replacement guidance included with every shipment to support your fleet maintenance planning.

In Stock · MOQ 1 pc
View Details

Push Rod 31434307 for Perkins 1004-40T – Scheduled Maintenance

Push Rod 31434307 (cross-reference only) for Perkins 1004-40T, high-strength alloy steel — a predictable wear item in the valve train, typically renewed during scheduled valve adjustments or top-end overhauls. Inspect for bending or tip wear at each service interval; replace as a full set to maintain even valve timing across all cylinders on CASE, Landini, and New Holland equipment sharing this engine platform. - Replacement interval guidance included with shipment for fleet maintenance planning

In Stock · MOQ 1 pc
View Details

ISO-Certified

Quality Assured

2-5 Day Ship

In-stock Items

3-12 Mo Warranty

All Parts Covered

24H Quotation

Fast Response