Engine Auxiliary Components 20 - Heavy Equipment Parts

Recoil Pull Starter 1137-080-2115 for Stihl MS194T – Service Part

Recoil Pull Starter 1137-080-2115 for Stihl MS194T — New aftermarket replacement for forestry and landscaping chainsaw fleets (cross-reference: 1137-080-2115, 1137-084-1002) Plan replacement before cord fraying or spring fatigue causes reactive downtime Full assembly swap recommended when housing shows stress; inspect flywheel engagement and throttle linkage during service Stocking ahead ensures continued support as older chainsaw models age Replacement interval guidance and cross-reference verification included with shipment.

In Stock · MOQ 1 pc

View Details

Stanley-Compatible Rubber Isolator Shock Mount – Fleet Supply

TRSA000008038 Cushion Damper, Rubber Shock Mount — replacement for Stanley, Bobcat and Doosan vibratory plate compactors including HS6000, HS6019, HS6100 and HSX6 series. Cracked or permanently deformed rubber indicates the damper has lost isolation capacity, transmitting vibration directly into hydraulic lines and frame welds — replace as a set to restore balanced damping across all mounting points. Fits compactors used in road repair, trench backfilling and asphalt work; cross-reference TRSA000008038 / SW-180100 (interchange reference only). Fleet replacement interval guidance included with shipment to support proactive maintenance scheduling.

In Stock · MOQ 1 pc

View Details

12V 2.7kW Starter Motor for Kubota Bobcat – Service Part

6676957 6685190 Starter Motor, 12V 2.7kW, 11-Tooth PLGR — replacement for Kubota V2203/V3300 engines and Bobcat skid steer and track loaders. Plan cranking system replacement into scheduled maintenance cycles to prevent unplanned downtime. Typical wear signs include slower cranking speed and increased current draw from brush or solenoid degradation. Fits Bobcat S130–S850, T110–T870, and Kubota-powered equipment Single-component swap or pair with battery and wiring inspection Fleet stocking recommendations and replacement interval guidance included with shipment

In Stock · MOQ 1 pc

View Details

Vibration Mount 91-2281 for Yanmar 3.95 – Scheduled Maintenance

Replacement interval guidance included with shipment to support fleet-level preventive maintenance planning

In Stock · MOQ 1 pc

View Details

Shock Absorber Rubber Vibration Mount 358172 for Dynapac – Service Part

358172 Cushion Damper for Dynapac Rollers, Rubber Vibration Mount with Metal Core — replacement for Dynapac CA51, CA510, CA610, CA702 series compactors. Scheduled damping system inspections typically reveal wear through increasing platform vibration, visible rubber cracking, or loosened mounting hardware Replace as a full set to maintain balanced vibration isolation across the machine and prevent cascading stress on hydraulic lines and electrical connectors Older Dynapac roller models remain supported through our aftermarket supply channel with consistent availability.

In Stock · MOQ 1 pc

View Details

12V 14A Alternator 15531-64017 for Kubota B Series – Fleet Supply

15531-64017 Alternator, 12V 14A with Rectifier Regulator — replacement for Kubota B, BX, F, G, and ZD series tractors spanning multiple production decades. Typical wear signs include dimming lights and slow cranking under load; replacing the alternator as a matched assembly with the included regulator avoids early re-failure from an aged unit. Superseded cross-reference numbers 15531-54013 and 15531-64016 verified for fitment continuity. Aftermarket supply remains active for aging models like B8200 and G3200 where dealer stock thins Fleet stocking supported with replacement interval guidance included in shipment documentation

In Stock · MOQ 1 pc

View Details

Recoil Starter Assembly 576594001 – Service Part for RedMax EBZ6500

Recoil Starter Assembly 576594001 – replacement for RedMax EBZ6500, EBZ7500, EBZ8500, EBZ8560 series backpack blowers, complete assembly with reinforced nylon housing and high-tensile spring. Replace at first signs of weak retraction, rope slippage, or housing cracks to avoid unplanned downtime during peak season Independent assembly design allows on-site swap without engine teardown—inspect pawl engagement and flywheel teeth while replacing Sustained aftermarket supply keeps older RedMax blowers serviceable beyond thinning brand support Older RedMax blower models remain continuously supported with verified-fit replacements through our single-source supply channel.

In Stock · MOQ 1 pc

View Details

12V 9T Starter 23300-FU410 for Nissan K15 K21 K25 – Service Part

Planned replacement intervals and long-term supply continuity supported for aging Nissan-powered fleets

In Stock · MOQ 1 pc

View Details

12V Fuel Shut Off Solenoid P610-B1V12 | Fleet Supply for Heavy Equipment

P610-B1V12 Stop Solenoid, 12V Pull-Type with Return Springs — aftermarket fuel shut off solenoid compatible with excavators, loaders, bulldozers, and tractors requiring Trombetta-style P610-B1V12 fitment. Watch for coil insulation breakdown, weakened spring return force, and hardened seals as indicators of aging Plan single-unit replacement within fleet preventive maintenance schedules rather than waiting for failure Inspect relays, fuses, and wiring connectors during swap to avoid repeat burnout Replacement interval guidance included with shipment to support your fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

12V Stop Solenoid 7167-620B | Service Part for CAV LUCAS DPA DPS

7167-620B Stop Solenoid, 12V, for CAV LUCAS DPA DPS Systems — replacement for fuel injection pump shut-off circuits in construction and agricultural engines. Early failure signs include intermittent shutdowns and hard starting; scheduled replacement avoids unplanned fleet downtime Single-component swap without disturbing the pump assembly, keeping maintenance windows predictable Weather-sealed connections resist corrosion in dusty or humid operating conditions Older CAV LUCAS systems remain supported through stable aftermarket supply with replacement interval guidance included.

In Stock · MOQ 1 pc

View Details

Woodward-Compatible Stop Solenoid 1502-12A2U1B2 – Fleet Supply

1502-12A2U1B2 Stop Solenoid, 12V, New Aftermarket — compatible with Woodward engine shutdown systems and cross-reference 1500-2114. This safety-critical component controls fuel cutoff, and early signs of degradation include sluggish shutdown response or intermittent starting faults. Replacing the solenoid at scheduled service intervals prevents runaway risk and avoids costly unplanned downtime across the fleet. Maintenance interval recommendations ship with every order.

In Stock · MOQ 1 pc

View Details

Glow Plug 1G679-65512 | Service Part for Kubota Engines

Glow Plug 1G679-65512, New Aftermarket, fits Kubota Z602, D902, V1505, V2403 engines — replacement for Kubota compact tractors, excavators, and generators in cold-weather service. Glow plugs degrade gradually with longer cranking times and incomplete combustion — scheduling set replacement at service intervals avoids reactive repairs and protects starter motors and batteries from excessive loads. One part number covers common Kubota engines across a mixed fleet, simplifying buffer stock and seasonal maintenance planning. Suggested replacement intervals included with shipment to support your fleet maintenance scheduling.

In Stock · MOQ 1 pc

View Details