Engine Auxiliary Components 18 - Heavy Equipment Parts

12V Fuel Shut Off Solenoid SBA185206083 – Scheduled Maintenance for Shibaura N844

SBA185206083 Stop Solenoid, 12V, for Shibaura ISM N844 — replacement for New Holland Boomer, TC, and Workmaster series tractors. Replacing this solenoid during scheduled service intervals prevents uncontrolled fuel flow and avoids emergency field shutdowns Corrosion-resistant housing and hardened steel plunger endure agricultural dust, moisture, and vibration across extended duty cycles Compatibility verification sheet covering superseded reference numbers provided with shipment

In Stock · MOQ 1 pc

View Details

12V 9T Starter Motor 132-4948 for Kubota D1105 – Fleet Supply

132-4948 Starter Motor 12V 9T — compatible with Kubota D1105, Toro Groundsmaster and Dingo compact utility loaders. Slow cranking or intermittent engagement typically signals approaching end of service life, making planned replacement alongside battery and ring gear inspection more cost-effective than reacting to no-start failures. Fleet operators benefit from stocking this single specification across mixed equipment sharing the same starter motor fitment. Replacement interval recommendations included with shipment for maintenance scheduling.

In Stock · MOQ 1 pc

View Details

Starter Motor 12V 10T 6670727 | Overhaul Grade for Bobcat 325-341

Starter Motor 6670727 12V 2.2KW, 10T, CW rotation — replacement for Bobcat 325, 328, 329, 331, 334, 335, 337, 341 compact excavators and S100 skid steer loader. Scheduled replacement before brush wear and solenoid contact degradation cause a no-crank event keeps your fleet productive; inspect battery health and cable integrity at the same service interval to avoid accelerated starter failure. Cross-reference interchange: SND0408, 228000-6921, 410-52186, 18447N (reference only, not genuine). Replacement interval guidance and long-term supply commitment for aging Bobcat models included with shipment.

In Stock · MOQ 1 pc

View Details

Glow Plug 185366190 TPN257 for Perkins 404D-22 404C-22 – Service Part

Glow Plug 185366190 for Perkins 404D-22 / 404C-22, 4 PCS per pack — replacement for cold-start reliability across generators, loaders and compact equipment powered by Perkins 404-series diesels. Replacing the full set maintains balanced combustion chamber heating and prevents repeated cold-weather no-start events Plan seasonal swap before winter or high-altitude deployment to avoid unscheduled fleet downtime Inspect relay and wiring circuits during change-out to address root cause of premature failure Replacement interval guidance and cross-reference sheet shipped with every order

In Stock · MOQ 1 pc

View Details

12V 65A Alternator 2871A306 for Perkins 1004-40T – Scheduled Maintenance

2871A306 Alternator 12V 65A for Perkins 1004-40T, 1104A-44 — replacement for Perkins 1103 and 1104 series engines in construction and mining fleets. Plan alternator exchange at scheduled service intervals to avoid field failures; inspect drive belt tension and charging circuit together Typical wear signs include declining battery voltage and dimming work lights between overhaul windows Stocking this reference covers multiple Perkins variants, reducing emergency logistics across mixed fleets Replacement interval guidance ships with every order to support your fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Fuel Shut off Solenoid SA-4026-12 3931195 for Cummins & Ford Fleet Supply

Fuel Shut Off Solenoid SA-4026-12, 12V, compatible with Cummins 5.9L/8.3L and Ford F700/F800 — replacement for part numbers 3931195 and 1752ES-12A7UC3B1S5 (cross-reference only). Proactive replacement during scheduled fuel system service prevents unplanned engine shutdowns and cascade damage to injection components Typical wear signs include intermittent cutoff, slow response, and coil overheating — align renewal with major engine overhaul milestones Fleet operators managing aging Cummins or Ford platforms benefit from long-term aftermarket supply continuity for this safety-critical component.

In Stock · MOQ 1 pc

View Details

Aftermarket Glow Plug 19077-65510 – Scheduled Maintenance for Kubota D1403 D1503 D1703 D1803

Glow Plug 19077-65510 for Kubota D1403 D1503 D1703 D1803 — aftermarket cold-start component replacing cross-reference 19077-65510, 19077-65512, 19077-65513. Scheduled replacement at pre-winter service intervals prevents cold-start failures across tractor, excavator, and generator fleets Replace as a full set to maintain balanced cylinder pre-heating and avoid repeated stress on individual cylinders Inspect glow plug relay and wiring connectors during renewal to address correlated aging Fleet maintenance plans supported with long-term supply continuity for aging Kubota-powered machines.

In Stock · MOQ 1 pc

View Details

12V Stop Solenoid J904630 for CASE 580E – Service Part

12V Stop Solenoid J904630 for CASE 580E, New Aftermarket — replacement for CASE backhoe loaders and Cummins 4B3.9/6B5.9 engines. Early coil insulation breakdown and spring fatigue often signal pending shutdown system failure, making proactive replacement during scheduled electrical audits more cost-effective than full fuel shutoff assembly exchange. - Fits CASE 580E, 580K, 580SK and related models with verified cross-reference to 3904630 Inspect adjacent fuel line seals and wiring terminals during service Long-term supply availability confirmed for ageing fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Glow Plugs 7030400 0100276034 | Service Part for Doosan Bobcat

Glow Plugs 7030400 0100276034, Diesel Engine Pre-Heating Components — replacement for Doosan and Bobcat equipment including D18, D24, S510, S530, S550, S570, S590, T550 and T590 models. Replace as a matched set during pre-winter service intervals to prevent extended cranking, white smoke at startup, and unnecessary battery or starter motor strain Schedule proactive replacement based on operating hours and cold-climate deployment rather than waiting for failure Maintenance interval guidance provided with shipment to support fleet-level planning across seasonal cycles.

In Stock · MOQ 1 pc

View Details

Alternator AM877557 Compatible with John Deere Yanmar – Fleet Supply

Replacement interval guidance included with shipment to support planned fleet maintenance cycles.

In Stock · MOQ 1 pc

View Details

15261-65513 Glow Plug Replacement for Kubota D600-D1005 – Service Part

15261-65513 Glow Plug, ISO-certified aftermarket replacement for Kubota D600–D1005 diesel engines, 3 pcs per set — fits agricultural tractors, compact excavators, and generators. Replace as a matched set during seasonal or hours-based service to maintain uniform cylinder heating across all bores Coordinate with fuel filter and battery checks to address the full cold-start chain before winter deployment Nickel-plated terminals and precision-machined housing resist oxidation through extended service intervals Suitable for older Kubota models where OEM supply has thinned; replacement interval guidance included with shipment.

In Stock · MOQ 1 pc

View Details

记录ID 9029，数字之和：9+0+2+9 = 20 句式结构：20 % 6 = 2 → [品类词] [规格或件号] | [站点修饰词] for [应用/机型] 站点修饰词池（xunpomachinery.com）：Service Part / Wear Item / Overhaul Grade / Fleet Supply / Long-Life / Scheduled Maintenance（6个）修饰词选取：20 % 6 = 2 → Overhaul Grade Rubber Buffer 06129902 06129901 | Overhaul Grade for Bomag BW Roller

06129902 06129901 Rubber Buffer | Overhaul Grade cushion damper for Bomag BW series vibratory rollers, Shore A 65±5 hardness, dynamic load capacity up to 5000 N. Fits BW90 through BW284 and D-series variants for road construction and airport runway compaction Replace buffers in matched sets to maintain balanced vibration isolation across the drum frame; inspect adjacent mounting hardware at each change cycle Compatible with Bomag BW roller maintenance schedules; typical wear signs include cracking and compression set Replacement interval recommendations ship with every consignment for predictable fleet service planning.

In Stock · MOQ 1 pc

View Details