Stop Solenoid

Engine Auxiliary Components

12V Stop Solenoid 3991167 SA-4941-12 – Service Part for Cummins 4BT

12V Stop Solenoid 3991167 SA-4941-12, replacement for Cummins 4BT engines in Hyundai R130/R170 — IP67 sealed with Class H coil insulation rated to 180°C, supporting up to 500,000 engagement cycles. Delayed shutdown response or intermittent engagement signals winding degradation before complete failure, making proactive replacement at electrical inspection intervals cost-effective Single-component swap preferred over full harness replacement unless recurring faults trace to upstream wiring Replacement interval guidance included with shipment to support fleet-level preventive planning across aging Hyundai R130 and R170 units.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Fuel Shut Off Solenoid SBA185206083 for Shibaura ISM N844 – Service Part

SBA185206083 Stop Solenoid, 12V DC, IP65 Brass Housing — replacement for Shibaura ISM N844 engines and compatible with New Holland TC, Boomer, T, and Workmaster tractor series. Watch for failure signs: no pull-in on cranking, random mid-cycle shutdown, or abnormal coil heating — early swap avoids unplanned fleet downtime. Typical service life reaches 100,000+ duty cycles; plan replacement during scheduled electrical system audits rather than waiting for field failure. Fits over 70 machine variants including TC35DA, Boomer 3050, and T2420 — confirm engine serial for exact application match. Maintenance interval recommendations ship with every order to support your fleet service planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Wear Item Stop Solenoid Compatible with Cummins 5.9L Ford F700

Replacement cycle recommendations ship with every order to support fleet-level maintenance planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Fuel Shut Off Solenoid J904630 for CASE – Service Part 12V Fuel Shut Off Solenoid J904630 for CASE – Scheduled Maintenance

J904630 Stop Solenoid, 12V DC, <120 ms Response — replacement for CASE 1845C, 580K, 580SK and Cummins 4B3.9, 6B5.9 engines (cross-reference J904630, 3904630). Solenoid insulation and plunger response typically degrade before total failure, making scheduled replacement during major service intervals more cost-effective than emergency field swaps Brass alloy body with PTFE-coated plunger supports frequent start-stop cycles in rental fleet duty profiles Recommended service interval guidance included with shipment to support preventive maintenance planning

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Service Part Fuel Shut-Off Solenoid AM882277 | Scheduled Maintenance for John Deere 670

AM882277 Stop Solenoid, 12V DC — replacement for John Deere 670, 770, 870, 970, 1070 compact tractors. Schedule proactive swaps when intermittent stalling or erratic fuel cutoff appears during daily start-stop cycles, before corrosion and thermal degradation cause full shutdown failure. Stocking ahead across seasonal work cycles keeps fleets running without emergency part waits. Fits John Deere compact utility tractors in planned maintenance rotations Cross-reference: AM876416, P610-C5V12 Replacement cycle guidance ships with every order to support fleet-level maintenance planning

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Shutoff Solenoid Valve 6681513 for Bobcat Skid Steer – Fleet Supply

Stop Solenoid 6681513, 12V, Class H insulation — replacement for Bobcat Skid Steer Loaders 751, 753, S175, S185, T190 and Excavators 325–341. Watch for intermittent shutoff or cold-start hesitation as coil insulation degrades through repeated thermal cycles. Review connectors and relay health alongside solenoid replacement to protect fleet uptime. Continued supply secured for aging Bobcat platforms past thinning brand-direct support.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Service Part 12V Fuel Shut Off Solenoid 425-35925 for Gehl Mustang

12V Fuel Shut-Off Solenoid 425-35925 for Yanmar-powered Gehl and Mustang skid steers. Monitor for delayed engine shut-off or post-shutdown fuel drip as early wear indicators Plan proactive replacement during routine maintenance windows to avoid unplanned downtime Linked wear with injectors suggests inspecting fuel system components at same service interval Stocking strategy based on fleet size prevents reactive procurement during peak season Replacement interval recommendations included with shipment for fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Stop Solenoid D610-B1V12 68990-015 | Fleet Supply for Kubota Engine

Stop Solenoid D610-B1V12 68990-015 — replacement for Kubota WG750, DF752, DF-750, DF972, D905 engines, 12V DC dual-coil pull-type with 2-terminal configuration. Stocking this solenoid as part of scheduled fleet maintenance avoids unplanned machine downtime when the unit fails to start or shut down reliably. Dual-coil design separates high-current pull-in from low-current hold, reducing thermal stress across repeated cold-start cycles. Zinc-plated steel housing resists corrosion in humid or coastal job sites. Replacement interval guidance ships with every order to support your preventive maintenance planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Fuel Shutdown Solenoid 119233-77932 – Fleet Supply for Yanmar

119233-77932 Fuel Shutdown Solenoid, 12V DC — aftermarket replacement for Yanmar 3TNE and 3TNV engine families in Takeuchi TB007–TB235, Hyundai R55-5/R60-5 and John Deere tractors. Typical wear signs include sluggish plunger response and coil insulation degradation from sustained high-cycle operation Replacement aligns with scheduled service intervals, and adjacent seals and O-rings warrant simultaneous inspection Standardized stocking across mixed Yanmar-powered fleets keeps machines running on your maintenance schedule, not the failure's Recommended replacement intervals and cross-reference verification details ship with every order.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Pull Solenoid P610-B1V12 | Fleet Supply for Engine Excavator Loader Bulldozer Tractor

P610-B1V12 Stop Solenoid, 12V DC, Pull Type with Dual-Spring Return — replacement for diesel engine shutdown control across excavator, loader, and bulldozer fleets. Proactive replacement at scheduled service intervals prevents coil burnout and spring fatigue from escalating into unplanned downtime or secondary fuel system damage. Stock ahead of predictable failure to keep fleet turnaround on schedule. Recommended replacement intervals included with each shipment for maintenance planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Fuel Cut-off Solenoid 7167-620B 9009-049 | Fleet Supply for DPA DPS Pumps

7167-620B 9009-049 Stop Solenoid, 12V, IP67 — replacement for DPA and DPS diesel injection pump systems across excavators, loaders, and generator sets. Coil insulation degrades under sustained engine bay heat, causing intermittent shutdown before total failure Single-component swap is typically sufficient unless adjacent pump seals show age; plan replacement alongside major service intervals to align with Class H thermal rating Compatible with CAV and Lucas pump platforms on Tier 2 and Tier 3 off-road engines Replacement interval guidance included with shipment to support fleet maintenance scheduling.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Stop Solenoid 1502-12A2U1B2 – Fleet Supply for Woodward 12V

Recommended replacement intervals included with shipment for fleet maintenance planning.

In Stock · MOQ 1 pc

View Details