Belt Drive Systems

Belt Drive Systems

Wear Item Fan Pulley Hub Bearing 04429639 Compatible with Ram 2500

BD35-12DU8A Fan Pulley Hub Bearing, 5.9L/6.7L Diesel, Dual-Lip Nitrile Seals — compatible with Ram 2500–5500 series trucks spanning 1998–2012 model years. Replacing this wear item on a mileage-based schedule prevents cascading damage to the water pump, fan clutch, and belt tensioner. Evaluates best when the cooling system shows early wobble or belt whip symptoms, supporting both single-unit swaps and fleet-level preventive planning. Replacement interval guidance included with shipment for maintenance scheduling accuracy.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Belt Tensioner Kit for Bobcat S130 S300 T200 – Fleet Supply

Belt Tensioner Kit 6662997, 6702474, 6725212 — replacement for Bobcat S130, S300, T200 skid steer and track loaders. Includes idler pulley with 608ZZ sealed bearings, spring arm, and O-ring for complete belt drive service. Replace at first signs of belt squeal, pulley wobble, or spring tension decay — full kit exchange prevents repeat failures from worn mating components Inspect drive belt condition and pulley alignment at the same service interval to extend belt drive system life across mixed S-series and T-series fleets Older Bobcat models like the 873 and 753 remain supported with planned maintenance stocking available. (记录ID: 9504)

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Scheduled Maintenance V-Belt 178509 – Fits Cummins N14 NT855 NTA855

V-Belt 178509 for Cummins N14 NT855 NTA855, CX Profile, 22mm Top Width — replacement for OEM cross-reference 178509 and 76107717. 1147mm effective length, polyester-cord reinforced rubber construction Fits NH855, NH220, NH250, and NTA855 engine variants Schedule replacement at major service intervals to prevent unplanned cooling and charging downtime Watch for cracking, glazing, and edge fraying as end-of-life indicators Consider refreshing tensioners and idler pulleys during the same service window Aging Cummins-powered fleets remain supported with verified dimensional tolerances and consistent supply continuity.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

V-Belt 3288497 for Cummins Engine – Long-Life Scheduled Maintenance Part

V-Belt 3288497 for Cummins ISB, QSB & 6CTA Engines — EPDM compound with aramid cord reinforcement, 32.5° V-angle, replacement for belt-drive systems on B and C Series platforms. Plans preventive replacement at scheduled service intervals to protect alternator bearings, water pump, and crankshaft damper from cascading damage Sidewall glazing, edge fraying, or audible squeal under load signal replacement is overdue — inspect tensioner and pulley grooves at the same time Multi-belt configurations benefit from full-set budgeting to avoid repeat downtime when remaining belts carry similar operating hours Replacement interval recommendations ship with every order to support fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Belt R123307 for John Deere Engine 3.9 4.5 6.8 – Service Part

R123307 Serpentine Drive Belt, high-tensile EPDM rubber with aramid cords, compatible with John Deere 3.9L, 4.5L, 6.8L engines — this belt drives multiple accessories including alternator, water pump, and AC compressor in a single loop. Scheduled replacement during routine service intervals prevents cascading failures across cooling and electrical systems, and replacing tensioners alongside worn belts extends service life. Recommended maintenance intervals included with shipment for fleet planning.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Drive Pump Belt 6726898 for Bobcat Loader – Fleet Supply

Drive Pump Belt 6726898 (cross-reference), flat cogged design with 3 grooves, 57.4-inch length and 1.19-inch width, fiber-loaded backing with cord reinforcement — compatible with Bobcat skid steer and track loaders including 753, 763, S130, S185, T140, and T190 series. Schedule replacement before visible cracking, squealing under load, or elongation-induced slack leads to cascading damage on pump couplings and idler pulleys Inspect tensioner and pulley condition during the same service window to avoid repeat downtime Supports aging 753/763/773 generations with reliable aftermarket supply when brand availability thins Replacement interval guidance included with shipment to support fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Wear Item Drive Belt 422280651 422280652 Compatible with Can-Am UTV

Drive Belt 422280651 422280652, 22mm width, EPDM compound — compatible with Can-Am Maverick X3 Turbo (2017–2021), Defender HD8/HD10 (2016–2018). HTD tooth profile with aramid reinforcement withstands continuous 130°C service in CVT systems. Replace at scheduled intervals alongside clutch face and sheave inspection to avoid cascading drivetrain damage Thermal degradation on turbo models under sustained load shortens belt life — plan stock accordingly Fleet replacement cycle recommendations included with every shipment.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Clutch Drive Belt 3211218 for Polaris Ranger – Fleet Supply

Clutch Drive Belt 3211218, Aramid-reinforced HNBR compound — replacement for Polaris Ranger 1000, Ranger SP 570, and Pro XD utility platforms. Typical wear indicators include rubber glazing, edge cord fraying, and tooth profile deformation; proactive swap avoids secondary clutch sheave damage that escalates a simple belt change into a full assembly rebuild. Stocking ahead of predictable consumption keeps fleet machines field-ready across agricultural, quarry, and rental operations. Compatible with Ranger XP 1000, Crew 1000, SP 570 EPS, and Pro XD Mid-Size and Full-Size Gas (2020–2024) Operating range -20°C to +85°C, ISO 9001 production Replacement interval guidance and cross-reference sheet (3211218, 26C4057) supplied with shipment for long-term fleet planning

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Drive & Alternator Belt Set 6726898 6675837 – Service Part for Bobcat 753–T190

Drive & Alternator Belt Set 6726898 6675837, EPDM compound with polyester cord — replacement for Bobcat 753, 763, 773, S150–S185, T180 and T190 skid steer loaders. Scheduled wear item: replace at standard service intervals to prevent alternator output loss and hydraulic pump drive failure Matched set ensures uniform tension across both belts, avoiding premature failure from mismatched wear Supports aging 753 and 763 models where brand channel supply is thinning Replacement interval guidance included with shipment for fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

7302291 Cooling Fan Belt Tensioner for Bobcat – Wear Item

7302291 Cooling Fan Belt Tensioner for Bobcat skid steer and track loaders, cold-forged steel housing with 100,000+ cycle spring life — replacement at scheduled service intervals prevents belt slippage, coolant temperature rise, and cascading damage to fan pulleys and water pump bearings across the belt drive system. Fits Bobcat models 653, 753, 863, S185, T200, T300 and more Replace alongside fan belt to align service intervals and protect cooling circuit Supports older loader models with reliable aftermarket supply past thinning brand support Planned maintenance replacement interval recommendations ship with every order.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Drive Belt 07200921 | Overhaul Grade for Ariens Gravely Mower

Drive Belt 07200921, Belt Drive System, 110.5" Pitch Length, EPDM with Aramid Reinforcement — replacement for Ariens Ikon and Gravely ZTX/ZT XL 52" zero-turn mowers. Typical replacement timing aligns with seasonal duty cycles and operating hour thresholds; monitor for glazing, cracking, or elongation under load as wear indicators. Aramid cord and high-modulus EPDM resist heat and ozone through repeated start-stop use. Stocking ahead keeps fleet uptime predictable during peak season. Fits Ariens 918004, 918005, 918026, 918028; Gravely 918010, 918011, 918014, 918015 Recommended replacement intervals provided with shipment for maintenance scheduling

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Tensioning Pulley 04133543 for Deutz D2.9L4 TD2.9L4 TD2.9L04 – Fleet Supply

Tensioning Pulley 04133543 for Deutz D2.9L4, TD2.9L4 & TD2.9L04 Engines — aftermarket belt drive wear part in forged SAE 1045 steel with sealed double-row bearings, IP54 rated. Replace at first signs of belt squeal, pulley wobble, or uneven belt edge wear to prevent cascading damage to alternator and water pump bearings Schedule tensioner renewal alongside belt and idler refresh for single-interval accessory drive overhaul Replacement interval guidance supplied with each order to support your fleet maintenance planning.

In Stock · MOQ 1 pc

View Details