Stop Solenoid - Heavy Equipment Parts | XUNPO Global Distribution

Stop Solenoid 1502-12A2U1B2 for Woodward 12V Engine Shutdown Control – Fleet Supply

1502-12A2U1B2 Stop Solenoid, 12V DC Shutdown Control — aftermarket replacement for Woodward systems, featuring IP67 sealing and nickel-plated construction for harsh mining, marine and industrial environments. Typical replacement is triggered by sluggish shutdown response or coil degradation spotted during scheduled safety audits. Planning a spare ahead of predictable wear avoids unplanned fleet downtime and keeps emergency stop circuits compliant. Cross-reference: 1500-2114 (interchange reference only) Tested to SAE J1455 vibration standard Suggested replacement intervals provided with shipment

In Stock · MOQ 1 pc

View Details

Kawasaki-Compatible Stop Solenoid M138477 – Fleet Supply

M138477 Stop Solenoid, 12 VDC, Class H insulation — compatible with Kawasaki FD611V/FH531V engines and John Deere 325, 335, 345, X540, Gator series. Replace proactively at scheduled service intervals before erratic cutoff or coil burnout causes unscheduled fleet downtime. Single-component swap avoids full fuel system teardown. Fits 20+ utility tractor and Gator models FKM fluoroelastomer seal resists biodiesel degradation Hard-chrome plunger shaft for high-vibration durability 6-month warranty, MOQ 1 piece Replacement cycle guidance included with every shipment to support your fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

12V Fuel Stop Solenoid 16851-60014 – Fleet Supply for Kubota ZD Mowers

16851-60014 Stop Solenoid, 12V DC, IP67 Sealed — replacement for Kubota ZD18, ZD21, ZD321 zero-turn mowers. Coil insulation degrades and plungers bind after hundreds of start/stop cycles in wet mowing conditions; scheduling replacement before peak season avoids mid-job failures. Stainless steel plunger with hardened surface reduces binding in the brass bore over service life. Fits ZD18, ZD18F, ZD21, ZD21F, ZD221, ZD321, ZD321N, ZD323 Cross-reference: 052600-4530, 052600-4531, 16851-60010, 16851-60012 Suggested replacement intervals included with shipment to support fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

12V Fuel Injection Shutoff Solenoid Service Part for Perkins John Deere

12V Stop Solenoid, RE62240 / RE37089 / AR90340 cross-reference, IP65 sealed — replacement for Perkins 1004/1006 and John Deere 4239/6466 series engines. Typical failure signs: intermittent shutdown, hard starting, then no-start as coil insulation degrades under thermal cycling Single-part swap before pump damage occurs; Class H (180°C) winding and nickel-plated brass housing support repeated duty cycles Fits GM/Ford 4.3L–7.3L mechanical fuel pump applications Replacement interval guidance included with every shipment to support your fleet maintenance schedule.

In Stock · MOQ 1 pc

View Details

12V Fuel Stop Solenoid 16851-60014 for Kubota RTV900 – Service Part

16851-60014 Fuel Stop Solenoid, 12V DC, Stainless Steel Plunger — compatible with Kubota RTV900 series including G, R, T, W, and XT variants for utility and agricultural fleet use. Scheduled replacement during service intervals prevents unplanned shutdowns and supports safe engine restart under load Pair inspection with fuel filters and line seals to address root causes of solenoid coil failure Cross-reference numbers 052600-4530, 052600-4531, 16851-60010 verified for interchange fitment Continuous supply for older RTV900 generations maintains long-term fleet uptime Replacement cycle recommendations included with every shipment to align with your maintenance planning.

In Stock · MOQ 1 pc

View Details

Stop Solenoid for Cummins 4BT 6BT – Scheduled Maintenance Service Part

Stop Solenoid 3930658, 12V, <45 ms Engagement — compatible with Cummins 4BT and 6BT engines as a planned maintenance replacement for the auxiliary shutdown system. Typical failure signs include coil insulation degradation and return spring fatigue, causing intermittent shutdown behavior before complete loss Single-component replacement is suitable when the fuel shutoff valve body and linkage remain within tolerance Forward stocking across service intervals reduces unplanned downtime for fleets operating multiple 4BT/6BT-powered machines Cross-reference verified against 3932529 and SA-4756-12, with replacement interval guidance supplied per consignment.

In Stock · MOQ 1 pc

View Details

Wear Item Fuel Shut Off Solenoid Compatible with Honda GX630 GX660

16200-Z6L-003 Stop Solenoid, 12V DC / 2.1A — replacement for Honda GX630, GX660, GX690 engines in generators, compressors, and pumps. Predictable wear item: replace during scheduled service intervals before intermittent cut-offs escalate to total fuel flow interruption Standalone service component — no adjacent fuel-system teardown required EPDM seals withstand ethanol-blended fuels; Class H insulation supports continuous high-temperature duty cycles Replacement interval guidance included with shipment to support fleet maintenance planning

In Stock · MOQ 1 pc

View Details

12V Stop Solenoid 35DZS1E2 – Service Part for Deutz BFL914

35DZS1E2 Stop Solenoid 12V — replacement for Deutz BFL914, BF 3L 914, F 3L 914 and wider 914-series engines, DIN 43650-A connector, IP67 sealed. Fits engine auxiliary fuel cutoff systems across quarry, marine and municipal equipment Replace at signs of sluggish armature response or intermittent shutdown to prevent injection pump damage Serviceable as a single unit without full shutoff assembly exchange Pair with fuel pump housing gasket and relay check during the same service interval Supplied with replacement interval guidance and long-term availability for ageing 914-series fleets.

In Stock · MOQ 1 pc

View Details

12V Throttle Solenoid P12972 – Service Part for Niftylift Fleet Maintenance

P12972 Stop Solenoid, 12V, sealed epoxy coil — replacement for Niftylift TD34, SD34, SD50, HR17D and HR21D aerial platforms. Coil insulation breakdown and armature fatigue accumulate over repeated start-stop cycles; erratic idle or failure to shut down are early indicators. Swapping the solenoid alone avoids unnecessary teardown of the linkage and injection pump interface when it is the only faulted element. Fits Niftylift scissor and boom lifts including HR10, HR12, HR15N, HR17N, 120SD, 170SD, NL210 Operating voltage range 10–14V DC with <35ms response time Cross-reference: 1502ES-12C7U1B1, ES1502C-12V T20 Replacement interval guidance ships with every order to support fleet-level maintenance planning.

In Stock · MOQ 1 pc

View Details

Fuel Solenoid 2852741 for New Holland F4CE9484C J600 – Scheduled Maintenance

Fuel Solenoid 2852741 Stop Solenoid, 12V — replacement for New Holland F4CE9484C and F4CE9484L J600 engines in loaders, telehandlers and agricultural tractors. Plan replacement during scheduled engine service intervals to avoid unexpected shutdowns under load; typical wear signs include hard starts, stalling at high demand, and rough engine stop. Replace alongside fuel filters, O-rings, and inlet line seals to keep the fuel cut-off system fully refreshed in one maintenance window. Suggested replacement intervals included with every shipment to support your fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

12V Fuel Stop Solenoid Valve 41-9100 42-0100 for Thermo King TK486 SLXi – Service Part

12V Fuel Stop Solenoid Valve 41-9100 / 42-0100, 12V DC, IP67 — replacement for Thermo King TK486, SLXi, SB III and other transport refrigeration units. This solenoid sits at the engine shutdown control point; typical failure shows as sluggish shutoff or no-start after thermal cycling. Plan single-component replacement before insulation breakdown forces full assembly exchange. Fits TK249, TK374, TK388, TK486, SLXi 100–400, T-Series, TriPac APU and more OEM reference numbers 41-9100, 42-0100, 41-4306, 41-7886, 42-1700 (cross-reference only) Recommended replacement interval guidance provided with shipment for fleet planning

In Stock · MOQ 1 pc

View Details

12V Shutoff Solenoid Valve 1G820-60022 for Kubota – Fleet Supply

1G820-60022 Stop Solenoid, 12V, EPDM Dual O-Ring Seals — replacement for Kubota D722, D782, D902 engines in KX018-4, U15, U17 and SCL1000 equipment. Plan replacement at early signs of delayed engine release or erratic shutdown to avoid fuel system over-fueling damage EPDM seals degrade predictably in diesel environments — schedule alongside routine service intervals rather than waiting for failure Sustained aftermarket availability supports aging fleet lifecycle planning when brand support thins Replacement interval guidance included with shipment for fleet maintenance scheduling.

In Stock · MOQ 1 pc

View Details