Connecting Rod 17311-22014 for Kubota D1703 V2203 – Service Part
Replacement cycle guidance included with shipment for planned fleet maintenance programs.
In Stock · MOQ 1 pc
Showing 85-96 of 117 products
MOQ 1 Piece
Ships 2-5 Days
Connecting Rod 16851-22010 for Kubota Z482 D722 Engine – Wear Item
Recommended service intervals and parts planning guidance included with shipment to support long-term fleet maintenance
In Stock · MOQ 1 pc
Connecting Rod 1G924-22014 for Kubota V2003 V2203 V2403 – Service Part
Connecting Rod 1G924-22014 for Kubota V2003, V2203, V2403 Engines — replacement for scheduled overhauls across excavator, tractor and loader fleets. Replacing rods at planned service intervals avoids secondary damage to pistons, crankshaft and cylinder block, keeping fleet turnaround predictable. Single-rod or full-set replacement options support balanced engine operation during rebuilds. Recommended replacement intervals and inspection guidance included with every order.
In Stock · MOQ 1 pc
Connecting Rod 31A19-10024 for Mitsubishi S3L/S4L Engines – OEM-Replacement Grade
Stop downtime from cracked or worn connecting rods — this OEM-replacement grade Mitsubishi connecting rod 31A19-10024 delivers the same fatigue resistance and pin-bore concentricity as factory originals, so your S3L/S4L engine rebuild stays reliable under high-load cycles. Fits Mitsubishi S3L, S4L, S3L2, S4L2 engines — plus T233 and T273 tractors (no guesswork on cross-model compatibility) Manufactured to ISO-certified factory specs with hardened 40Cr steel and precision-machined big-end cap alignment surfaces Ships from Guangzhou warehouse in 2–5 working days — no waiting weeks for OEM backorders Backed by 6-month warranty against material or workmanship defects — we stand behind every rod we ship
In Stock · MOQ 1 pc
Kubota Connecting Rod 16851-22010/12/15/17 for Z482 D722 D782 Engines
Get back to work faster with a precision-matched Kubota connecting rod that delivers OEM-level strength and fit—no guesswork, no downtime from mismatched parts. Built for high-stress rebuilds on aging Z482, D722, and D782 engines, these rods eliminate the risk of premature failure common with inconsistent aftermarket batches. Direct-fit replacement for part numbers 16851-22010 / 16851-22012 / 16851-22015 / 16851-22017 — including critical hardened big-end bushings (often omitted in budget sets) Covers excavators like KX41-3 and U10-5, plus tractors, mowers, and RTVs — all from one verified source Pre-tested for tensile yield and pin-hole alignment to prevent crankshaft scoring during installation Ships same-day from Guangzhou warehouse — no waiting weeks for OEM lead times or chasing multiple suppliers
In Stock · MOQ 1 pc
Connecting Rod 119E10-23001 for Yanmar 3TNV88/3TNV80 – OEM-Replacement Grade
Get back to work faster with a drop-in OEM-replacement grade connecting rod 119E10-23001 for Yanmar 3TNV88/3TNV80 — no machining, no fitment headaches, just reliable uptime. We know how costly downtime is when a rod fails mid-job, especially on aging 3TNV-series engines where crankpin wear and bearing clearance drift are common culprits. Direct-fit replacement for all listed 3TNV80/3TNV88 variants — including hard-to-match F-series submodels like 3TNV80F-NXDLST and 3TNV80FT-ZMWM2 Made from forged SAE 4340 steel with precision-ground big-end bores — critical for maintaining correct side-clearance and oil film integrity under high-RPM load Cross-references four OEM part numbers (119E10-23001, 119E1023001, 119E10-23000, 119E1023000) so you’re covered whether your service manual uses dashes or not Pre-tested for tensile strength and dimensional accuracy — because “close enough” isn’t acceptable when cylinder pressure hits 1,800+ psi
In Stock · MOQ 1 pc
Kubota Connecting Rod 15471-22012/15471-22013 for D1301/D1402 Engine Rebuild
Get back to work faster with a precision-machined Kubota connecting rod that restores full engine compression and eliminates costly downtime from cracked or stretched rods. Built to OEM tolerances with hardened steel and proper big-end bushing clearance, this part delivers the reliability your D1301/D1402 rebuild demands — no guesswork, no rework. Fits Kubota D1301, D1402, and D1402-BBS engines — verified for correct crankpin journal diameter (52.98–53.00 mm) and rod length (137.0 ± 0.1 mm) Direct replacement for 15471-22012 & 15471-22013 — also cross-references obsolete numbers like 15471-22010 and 15201-22010 Ready to install: pre-balanced, honed to spec, and supplied with genuine-grade bearing shells Backed by our 6-month warranty — because we know how critical one failed rod is in a KH-151 or KX151 under load
In Stock · MOQ 1 pc
Connecting Rod for Kubota D905–V1505 Engines – OEM-Grade Replacement
Stop unexpected downtime and costly rebuilds — this OEM-grade Kubota connecting rod delivers factory-spec strength and precision fit for D905 and V1505 engines used in excavators, compact loaders, and agricultural machinery. Direct replacement for Kubota D905, V1505, and 6 other engine variants — no machining or fitting required Forged from 42CrMo high-tensile steel with hardened big-end bore and precision-machined beam profile — critical for maintaining rod-to-crank alignment under high-cycle loads Pre-tested for dimensional accuracy and fatigue resistance — eliminates the risk of counterfeit rods that fail prematurely under load Ships same-day from our Guangzhou warehouse when ordered before 3 PM CST (MOQ: just 1 piece)
In Stock · MOQ 1 pc
Connecting Rod 1G924-22014 for Kubota V2003/V2203/V2403 Engines – High-Strength Replacement
Stop unexpected downtime and costly engine rebuilds — this high-strength Kubota connecting rod delivers OEM-equivalent durability for V2003/V2203/V2403 engines, even under heavy-duty cycles in excavators, tractors, and loaders. Fits critical models like Kubota KX040-4 excavator, L5240HST tractor, and R430 wheel loader — verified against factory service specs Manufactured to exact 1G924-22014 dimensional tolerances with hardened I-beam cross-section and precision-machined big-end bearing surfaces Backed by our 6-month warranty and real-time technical support — no more guessing whether a “compatible” rod will survive your next 500-hour service interval Ships same-day from Guangzhou warehouse when ordered before 3 PM CST — no waiting weeks for OEM lead times
In Stock · MOQ 1 pc
Connecting Rod 719810-23100 for Yanmar 3TNE78 Engine – OEM-Replacement Grade
Stop unexpected downtime and costly engine rebuilds — this OEM-replacement grade connecting rod 719810-23100 for Yanmar 3TNE78 delivers factory-spec strength and precision fit, so your excavator or compact loader stays online longer between overhauls. Directly replaces original Yanmar 3TNE78 & 3TNE78A engines — verified with correct big-end bore tolerance (48.005–48.010 mm) and beam cross-section geometry Certified ISO 9001 material traceability and heat-treated to 28–32 HRC surface hardness — no guesswork on fatigue resistance Also fits Komatsu PC27R-8, PC27MR-2, and 3D78AE/3D82AE series machines — no need to juggle multiple suppliers Ships same-day from Guangzhou warehouse — no waiting weeks for OEM backorders
In Stock · MOQ 1 pc
Connecting Rod 04287602 for Deutz F4M2011/F4L2011 – High-Strength Replacement
Stop unexpected downtime and costly engine rebuilds — this Deutz connecting rod 04287602 delivers OEM-equivalent strength and precision fit for F4M2011, F4L2011, BF4M1011, and BFL1011 engines, backed by our 3–12 month warranty. Forged from high-tensile 42CrMo alloy steel — critical for maintaining correct big-end bore geometry under sustained high-RPM load Cross-checked against original Deutz blueprints for exact journal diameters, cap-to-rod alignment, and bolt torque specs Ships same-day from Guangzhou warehouse — no waiting weeks for OEM backorders Verified compatible with all listed cross-reference numbers: 04287602, 04174410, 4287602, and more
In Stock · MOQ 1 pc
Connecting Rod 7031360 for Bobcat E42–E85 & Doosan D24 Engine Replacement
Stop unexpected downtime and costly engine rebuilds — this 7031360 connecting rod delivers OEM-equivalent strength and precision fit for Bobcat E42–E85 and Doosan D24 engines, right out of the box. Direct replacement for 7031360, 7031362, 7031361, 7031358, and 7031359 — no guesswork, no cross-referencing delays Fits Bobcat’s full E-series (E32–E85), S/T-series loaders & compact track loaders, plus ToolCat 5600/5610 and Portable Power P185 Manufactured to original journal diameters and beam geometry specs — critical for maintaining correct crankshaft clearance and big-end bearing load distribution Pre-tested for tensile yield and fatigue resistance at 1,200 MPa minimum — a spec most aftermarket rods skip but your D24 engine absolutely depends on
In Stock · MOQ 1 pc