Glow Plug

Engine Auxiliary Components

Glow Plug 3974953 for Kubota D1402 V1702 – Service Part

Glow Plug 3974953 for Kubota D1402 V1702 Engines, New Aftermarket — replacement for Bobcat 643, 645, 743, 743B skid steer loaders and 1600 wheel loader. Gradual heating element degradation causes slow cold starts, excess white smoke, and increased starter motor load over time Replace all four cylinders together when one fails — remaining plugs from the same batch are typically near end of service life Inspect voltage regulator and battery health before fitment to prevent repeat burnout of new plugs Planned maintenance schedules and cold-season preparation intervals supplied with shipment.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Service Part Glow Plug 16281-65510 for Kubota D905 D1005 D1105 D1305

16281-65510 Glow Plug for Kubota D905, D1005, D1105, D1305 Engines — replacement for cold-start reliability on small diesel powerplants. Schedule replacement as a matched set before winter to keep cylinder heating balanced and avoid reactive downtime Typical wear signs include hard starting, white smoke on cranking, and uneven idle when one plug degrades ahead of the rest Pair with battery and starter motor checks to address root cause rather than symptom alone Forward stocking supported for aging B-series tractors where dealer availability is thinning — service interval guidance included with shipment

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Glow Plug 1G679-65512 | Service Part for Kubota Engines

Glow Plug 1G679-65512, New Aftermarket, fits Kubota Z602, D902, V1505, V2403 engines — replacement for Kubota compact tractors, excavators, and generators in cold-weather service. Glow plugs degrade gradually with longer cranking times and incomplete combustion — scheduling set replacement at service intervals avoids reactive repairs and protects starter motors and batteries from excessive loads. One part number covers common Kubota engines across a mixed fleet, simplifying buffer stock and seasonal maintenance planning. Suggested replacement intervals included with shipment to support your fleet maintenance scheduling.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Glow Plug 16851-65510 for Kubota Engine – Service Part

Glow Plug 16851-65510 for Kubota Engine — replacement for Kubota D-series and Z-series engines, 3 pieces per pack, new aftermarket condition. Typical replacement interval aligns with seasonal cold-start preparation, flagged by extended cranking or white smoke at startup. Stocking ahead of winter avoids reactive downtime across mixed compact equipment fleets. Fits Kubota B, BX, KX, RTV, ZD and GR series machines sharing the same cold-start circuit Cross-reference 16851-65512, 16854-65510, 16854-65512 (cross-reference only) for superseded variants Older Kubota models remain supported with verified compatibility and replacement interval guidance included on dispatch

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

4Pieces Glow Plug 6655233 for Kubota Bobcat – Wear Item

Glow Plug 6655233 (Cross-Reference), 4 Pieces — replacement for Kubota V1903, V2003T, D1703 and Bobcat compact equipment engines. Seasonal wear item for cold-start reliability Plan pre-winter stocking to reduce reactive downtime across mixed fleets Replace as a set; inspect batteries, starter motors, and wiring for linked wear Replacement interval guidance included with shipment to support fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Glow Plug ED0021000890S – Fleet Supply for Lombardini Kohler Deutz

Glow Plug ED0021000890S, 12.5V, M12x1.25 Thread — compatible with Lombardini, Kohler, and Deutz diesel engines for construction and industrial fleet applications. Plan seasonal replacement during scheduled maintenance to avoid cold-start failures that cost more in downtime than preventive stocking. Replacing glow plugs as a matched set keeps cylinder performance balanced and reduces starter motor and battery strain. Stocking ahead of winter prevents unplanned standstills on remote sites where emergency supply is limited. Replacement interval guidance ships with every order to support long-term fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Mitsubishi L3E-Compatible Glow Plug 16693SRV – Fleet Supply

Glow Plug 16693SRV for Mitsubishi L3E Engines, Heat-Resistant Alloy Sheath — replacement for Generac MLT6SMD light tower ignition circuits. Gradual degradation shows as extended cranking time and white smoke on cold startup; scheduling replacement before winter avoids unplanned fleet downtime. Replacing all plugs in a set prevents staggered failures across the ignition cycle. Recommended service intervals and cross-reference verification sheet ship with every consignment.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Glow Plug 16693SRV for Mitsubishi L3E – Scheduled Maintenance

Fleet-level batch stocking aligned with seasonal service intervals, with continued supply for aging MLT6SMD units

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Glow Plug MIU805954 for Yanmar John Deere – Fleet Supply

MIU805954 Glow Plug — replacement for Yanmar 3TNV80F, 3TNE74 and John Deere 1025R, 2025R compact tractors and utility vehicles. Proactive renewal during scheduled winter service prevents cold-start failure that strands equipment when downtime cost peaks Replace as a full set once cranking time lengthens or white smoke appears on start-up, reducing battery and starter load Supports aging Yanmar-powered fleets past thinning dealer support Replacement interval guidance supplied with every consignment to align with your fleet maintenance calendar

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Glow Plug 185366190 for Perkins 404D-22 – Scheduled Maintenance

185366190 Glow Plug, M10x1.25 Thread, 12V Dual-Coil — replacement for Perkins 404D-22, 404C-22, 104-22 and associated generator, telehandler, and compact equipment platforms. Scheduled before cold season or high-altitude deployment to prevent hard starts and cylinder flooding Full-set exchange recommended over single-plug swaps to avoid repeated head access and uneven cranking performance Supports aging 404 series fleets as dealer inventory thins on legacy platforms Cross-reference verified against TPN257 and superseded numbers; long-term supply available for older Perkins builds.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Glow Plug 19077-65510 for Kubota D1403 D1503 D1703 – Scheduled Maintenance

Glow Plug 19077-65510 for Kubota D1403, D1503, D1703 diesel engines — new aftermarket cold-start wear component. Replace on scheduled service intervals to avoid unplanned winter downtime and extended cranking White smoke or misfire on cold start signals end of plug life — swap as a full set for uniform pre-heat Compatible with Kubota tractor, excavator, loader and generator fleets using D-series engine platforms Maintenance replacement schedule recommendation included with every consignment for fleet planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Glow Plugs 7030400 for Doosan Bobcat D18 D24 – Service Part

Glow Plug 7030400, Cold Start Support — replacement for Doosan D18, D24 and Bobcat S510, S530, S550, S570, S590, T550, T590 engines (cross-reference 0100276034). Proactive seasonal stocking prevents cold-morning failures that strand machines on site Replace as a matched set across all cylinders to avoid staggered breakdowns and reduce starter motor load Predictable wear item best aligned with battery and starter inspection intervals Planned replacement schedules provided with shipment to support your fleet maintenance calendar.

In Stock · MOQ 1 pc

View Details