Fuel System

Fuel Line

Crankcase Breather Intake Line Assembly 270-090-07-00 Service Part

Crankcase Breather Intake Line Assembly 270-090-07-00 — replacement for Mercedes-Benz M270 2.0L engines in GLA250, CLA250, A-Class and B-Class platforms. Typical replacement node: rubber degradation from sustained engine-bay heat causes cracking and seal loss, often flagged by rising oil consumption or intake contamination during scheduled service inspections Replacing the full assembly rather than the hose alone preserves sealing integrity and avoids repeat teardowns across successive service windows Fleet-level replacement interval guidance included with shipment to support planned maintenance scheduling.

In Stock · MOQ 1 pc

View Details

Fuel System

Fuel Injector 1J770-53050 for Kubota V3307 – Scheduled Maintenance

1J770-53050 Fuel Injector for Kubota V3307, V3307-CR-TE4, V3307 Tier 4 engines — aftermarket replacement part. Fits KX080-4, SVL75-2, SSV75, M7060HD and other Kubota excavators, tractors, and loaders Replace at scheduled intervals when fuel consumption rises or smoke appears under load to prevent cascading fuel system damage Consider full-set replacement for balanced combustion across all cylinders Replacement cycle guidance included with shipment for fleet maintenance planning

In Stock · MOQ 1 pc

View Details

Fuel Pump

Kawasaki John Deere-Compatible Fuel Pump AM132715 – Fleet Supply

AM132715 Fuel Pump for Kawasaki & John Deere Engines — replacement for lawn tractors and compact utility machines including 320, 325, 345, GX345, LX172, LX176, LX188, F725, and Kawasaki FD501V, FD590V, FD611V engine platforms. Scheduled replacement during seasonal fuel system service prevents vapor lock, hesitation, and ethanol-related seal degradation Ethanol-resistant diaphragm and integrated check valve suited for equipment stored between mowing seasons Align pump replacement with fuel filter and fuel line inspection to avoid secondary contamination Replacement interval guidance included with shipment to support fleet maintenance planning

In Stock · MOQ 1 pc

View Details

Fuel Pump

9+2+8+1 = 20 20 % 6 = 2 → 句式结构2：[品类词] [规格或件号] | [站点修饰词] for [应用/机型] 站点 xunpomachinery.com 措辞池：Service Part / Wear Item / Overhaul Grade / Fleet Supply / Long-Life / Scheduled Maintenance (6个词) 20 % 6 = 2 → 第3个词：Overhaul Grade Fuel Pump 49040-7008 49040-0770 | Overhaul Grade for Kawasaki

Fuel Pump 49040-7008 / 49040-0770 — replacement for Kawasaki FR, FS, FX series and Cub Cadet mowers, ISO 9001 certified. Diaphragm degradation causes hesitation and hard starts before total failure, making scheduled stocking more effective than reactive ordering. Pair with inline filters and fuel lines from one consignment to keep fleet maintenance on interval. Cross-reference part numbers verified; planned replacement guidance included with shipment.

In Stock · MOQ 1 pc

View Details

Fuel Pump

Onan-Compatible Fuel Filter Fuel Pump Air Filter – Scheduled Maintenance

149-2457, 149-2311, 140-3280 Fuel Filter, Fuel Pump & Air Filter Set, 10 Micron Filtration, 3-5 psi Pump Pressure — replacement for Onan KY 3600, KY 4000, MicroQuiet and Camp Power RV generators. Replacing fuel and air filters together at scheduled intervals prevents linked contamination that shortens component service life Fuel pump diaphragm wear often shows as hard starting before full failure, making single-part swap viable over full system teardown Stocking these three consumables ahead of seasonal demand keeps fleet generators on planned maintenance windows Older KY series units remain supported with cross-reference verified supply for continued fleet operation.

In Stock · MOQ 1 pc

View Details

Fuel Pump

12V Fuel Pump AM876266 AM876207 Replacement for John Deere Yanmar Scheduled Maintenance

Replacement interval recommendations ship with every order to support your fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Fuel Pump

12V Fuel Pump 42-989 42-1762 for Thermo King Tripac – Fleet Supply

42-989 42-1762 12V Fuel Pump for Thermo King Tripac APU — replacement for auxiliary power unit fuel delivery in extreme temperature and high-vibration service. Watch for reduced fuel pressure, intermittent stalling, or extended cranking as wear indicators signaling scheduled replacement Plan pump service alongside fuel filter and line inspection to extend system reliability across fleet APU maintenance cycles Compatible with Tripac APU and Tri-Pac Evolution units where OEM supply chains are thinning Replacement interval guidance included with shipment to support proactive fleet stocking decisions.

In Stock · MOQ 1 pc

View Details

Fuel System

Fuel Injector 4928260 for Cummins ISX15 – Scheduled Maintenance

Fuel Injector 4928260, replacement for Cummins ISX15 & QSX15 — scheduled wear component within the fuel delivery system. Replace at signs of rough idle, increased fuel consumption, or visible exhaust smoke before cascading damage to cylinder liners and piston crowns occurs Fits ISX CM570, ISX15 CM2250, QSX15 CM570 platforms; cross-reference 4928260PX and 4928260RX verified Single-unit or full-set replacement available depending on engine hours and combustion balance requirements Recommended replacement intervals documented and supplied with each shipment for fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Fuel Pump

Vacuum Fuel Pump 808492 808656 – Scheduled Maintenance Service Part

Vacuum Fuel Pump 808492 808656, 1/4 inch Fuel Line, Vacuum Type — replacement for Briggs & Stratton, Craftsman, and White Outdoor horizontal engines used in generators, zero-turn mowers, and agricultural equipment. Diaphragm degradation from ethanol-blended fuel typically shows as hard cold starts or uneven idle before complete delivery failure — scheduling replacement ahead of this point avoids carburetor contamination and broader fuel system teardowns Fuel lines, inline filters, and carburetor needle and seat should be inspected on the same service interval to prevent repeat failures from adjacent wear items Stocking fewer consolidated SKUs across cross-reference numbers (interchange reference 491922, 692313, 24 393 04-S, 16700-Z0J-003 and others) simplifies inventory for mixed fleets ISO 9001 production with 3–12 month warranty against manufacturing defects Replacement interval recommendations and cross-reference verification documentation ship with every order to support your fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Fuel Pump

Fuel Pump RE68345 for John Deere Engines – Scheduled Maintenance

Fuel Pump RE68345 (cross-reference), replacement for John Deere 3029/4039/4045/6068 engines — a predictable wear component in the fuel delivery chain for tractors, harvesters, and forestry machines including 7410, 7710, 7810, and 1175H models. Plan replacement around filter change intervals and fuel quality history to avoid mid-season downtime Single-component swap or full fuel system refresh depends on machine hours and duty cycle Adjacent seals, lines, and filters share contamination risk — inspect upstream when pump wear appears Replacement cycle guidance ships with your order, supporting aging fleet maintenance planning across mixed John Deere equipment.

In Stock · MOQ 1 pc

View Details

Fuel Pump

12V Electric Fuel Pump AM876265 for John Deere Gator – Fleet Supply

AM876265 12V Electric Fuel Pump, 40–60 psi — replacement for John Deere Gator 4X2, 4X4, HPX, 6X4 series and Kawasaki FD620D / FD750D engines. Early signs of pump wear include cold-start hesitation, stall under load, and fuel pressure dropping below specification — scheduling replacement at these indicators prevents unplanned downtime across the fleet. Designed for continuous-duty operation in high-temperature worksite conditions with a direct-fit electrical connector matching the factory harness. Compatible with Yanmar 3TG72 applications and multiple Gator variants including Trail, Worksite, and Diesel models. Interchange reference: AM109405, AM876023. Fleet maintenance schedules supported with older Gator models continuously supplied and replacement interval guidance included with shipment.

In Stock · MOQ 1 pc

View Details

Fuel System

Service Part Fuel Injector Pump KM186FGET-12000 – Fits Yanmar L48N L48V

KM186FGET-12000 Fuel Injector Pump — replacement for Yanmar L48N, L48V, L100 and Kipor KDE6500T/KDE6700T generator engines, new aftermarket condition with 3–12 month warranty. Plan pump replacement at service intervals to prevent hard starting, uneven idle and secondary injector damage Single-component swap avoids full fuel system overhaul when degradation is isolated to the pump Stock ahead of predictable consumption across mixed fleets running 186F and L-series platforms Lifecycle maintenance guidance and replacement interval recommendations included with every shipment.

In Stock · MOQ 1 pc

View Details