Starter Motor 12V 11T 129242-77010 | Overhaul Grade for Yanmar 3TNV88
Replacement guidance for legacy Yanmar series supplied with each order.
In Stock · MOQ 1 pc
Showing 1-12 of 66 products
MOQ 1 Piece
Ships 2-5 Days
12V 9T Starter Motor 1G023-63010 – Service Part for Kubota D722
1G023-63010 Starter Motor, 12V 9T for Kubota D722/D782 — replacement for Kubota mowers and tractors including ZD21, GR2120, and BX1500D. Copper-wound field coils and IP54 sealing support reliable cold starts across seasonal fleet operations. Scheduled replacement before complete failure reduces unplanned downtime and keeps maintenance budgets predictable. Fits Kubota D722, D782, D722E-GX engines with matched flywheel ring gear inspection advised Cross-reference: 67980-31151, 67980-31150, 67980-31152 Consistent aftermarket supply for aging models past thinning brand support, replacement interval guidance included with shipment
In Stock · MOQ 1 pc
12V 9T Starter Motor 1J755-63010 for Kubota SVL75 – Fleet Supply
1J755-63010 Starter Motor, 12V 9T 3.0 kW — compatible with Kubota SVL75, SSV75 and AD70 loaders powered by V3307/V3800 engines. Predictable wear component in high-cycle loader operations; plan replacement before cold-start failures occur Inspect flywheel ring gear and solenoid contacts when swapping this unit to avoid repeat cranking issues Superseded reference numbers cross-verified; long-term availability maintained for aging Kubota fleets.
In Stock · MOQ 1 pc
Starter Motor 4996706 for Cummins Engines – Fleet Supply
Recommended replacement intervals provided with shipment for fleet lifecycle planning.
In Stock · MOQ 1 pc
12V 9T Starter Motor 04131602 for Deutz TCD 2.9 – Scheduled Maintenance
04131602 Starter Motor 12V 9T — replacement for Deutz TCD 2.9, TCD 3.6, TD 2.9 and TD 3.6 engine platforms. Sluggish cranking, solenoid hesitation or rising current draw signal approaching end of service life; scheduling replacement at a planned maintenance interval avoids costly peak-season downtime. Component-level exchange keeps turnaround fast, while full assembly replacement suits higher-hour units nearing overhaul. Cross-reference: 04606897, AZE4282, IS1380 (interchange reference only). Suggested replacement intervals and fleet stocking guidance provided with each shipment to support lifecycle planning.
In Stock · MOQ 1 pc
12V 9T Starter Motor 132-4948 for Kubota D1105 – Fleet Supply
132-4948 Starter Motor, 12V 9T, Class H Insulation — replacement for Kubota D1105 and Toro Groundsmaster compact equipment fleets. Solenoid lag, engagement grinding, or voltage drop under load signal end-of-life on high-cycle mowers and loaders Replace the motor alone or inspect the flywheel ring gear and battery circuit for linked wear across aging units Stocking ahead of predictable failures keeps rental turnaround and municipal maintenance schedules on track Suggested replacement intervals and compatibility verification for mixed fleets included with shipment.
In Stock · MOQ 1 pc
Starter Motor 12V 2.2KW 6670727 | Overhaul Grade for Bobcat Excavator
Starter Motor 12V 2.2KW 6670727 — replacement for Bobcat E25, E32, E35, E42, E50 compact excavators and S100 loader. 10-tooth pinion, CW rotation, matches cross-reference SND0408 and 228000-6921 Plan replacement at early signs of slow cranking or intermittent engagement to avoid unplanned downtime across the fleet Inspect battery, alternator and ring gear during the same service window to address root causes Typical service intervals and stocking recommendations included with shipment to support long-term fleet planning.
In Stock · MOQ 1 pc
12V 9T 2.0KW Starter Motor 45-2323 – Thermo King Fleet Supply
12V 9T 2.0KW Starter Motor 45-2323, replacement for Thermo King SB-200 through SL400 refrigeration units — proactive swap at early cranking symptoms prevents load-spoilage breakdowns on cold-chain fleets. Fits SB-200, SB-210, SB-300, SB-310, SB-II SR, SB-III SR, SL100–SL400 12V DC, 2.0kW output, 9-tooth pinion, IP54 sealed Zinc-nickel plated housing rated 720h salt-spray per ASTM B117 Insulation Class H for sustained high-temp cranking duty Typical end-of-life signals include extended crank time, intermittent engagement, or solenoid click without turnover — stocking ahead at scheduled service intervals eliminates reactive downtime. Replacement interval guidance included with shipment to support fleet maintenance planning.
In Stock · MOQ 1 pc
12V Starter Motor 25-098-11 for Kohler CH CV – Fleet Supply
Recommended replacement intervals included with shipment to support your fleet maintenance schedule.
In Stock · MOQ 1 pc
Starter Motor 12V 1.2KW for Kubota D902 – Service Part
Starter Motor 16824-63013 16824-63010 16824-63014 for Kubota D902, 12V, 1.2 kW output, 8-tooth drive gear — replacement for D902, D902E, and D902-E2B-DGDE-1 engines used in compact excavators, agricultural machinery, and portable generators. Plan starter replacement during scheduled maintenance intervals to avoid unplanned cold-start failures across fleet units Inspect battery condition, cable integrity, and flywheel ring gear alongside starter service for complete starting system health Stocking verified replacements ahead of seasonal demand peaks supports predictable uptime and maintenance budgeting Replacement interval guidance included with shipment for long-term D902 platform support
In Stock · MOQ 1 pc
12V Starter Motor 6676957 6685190 for Kubota V2203 V3300 Bobcat – Fleet Supply
12V Starter Motor 6676957, 2.7 kW PLGR, 11 Teeth — replacement for Kubota V2203, V3300 engines and Bobcat S770, T770, T870 skid steers. Plan proactive swap when cranking speed slows or current draw climbs, avoiding costly mid-shift no-start failures PLGR design delivers higher torque at lower battery draw, reducing strain on the charging system Pair with alternator and battery inspection during engine-adjacent service intervals for full circuit health Fleet stocking supported with long-term supply for aging models, and replacement cycle guidance included with each shipment.
In Stock · MOQ 1 pc
Starter Motor 23300-FU410 for Nissan K15 K21 K25 – Fleet Supply
Starter Motor 23300-FU410 for Nissan K15 K21 K25, 12V 1kW, 9T Pinion Gear, CW Rotation — replacement for Nissan K-series engines used in forklifts, light loaders, and material handling fleets. Plan starter replacement at scheduled service intervals to catch solenoid degradation, brush wear, and pinion erosion before flywheel damage occurs. Recommended maintenance cycle guidance included with shipment for your fleet records. Typical warning signs: slow cranking, intermittent engagement, grinding noise Inspect battery health and flywheel ring gear during scheduled starter replacement MOQ 1 piece, ISO 9001 and JIS D 5401 compliant
In Stock · MOQ 1 pc