Stop Solenoid - Heavy Equipment Parts | XUNPO Global Distribution

12V Throttle Solenoid P12972 – Service Part for Niftylift Fleet Maintenance

P12972 Stop Solenoid, 12V, sealed epoxy coil — replacement for Niftylift TD34, SD34, SD50, HR17D and HR21D aerial platforms. Coil insulation breakdown and armature fatigue accumulate over repeated start-stop cycles; erratic idle or failure to shut down are early indicators. Swapping the solenoid alone avoids unnecessary teardown of the linkage and injection pump interface when it is the only faulted element. Fits Niftylift scissor and boom lifts including HR10, HR12, HR15N, HR17N, 120SD, 170SD, NL210 Operating voltage range 10–14V DC with <35ms response time Cross-reference: 1502ES-12C7U1B1, ES1502C-12V T20 Replacement interval guidance ships with every order to support fleet-level maintenance planning.

In Stock · MOQ 1 pc

View Details

Fuel Solenoid 2852741 for New Holland F4CE9484C J600 – Scheduled Maintenance

Fuel Solenoid 2852741 Stop Solenoid, 12V — replacement for New Holland F4CE9484C and F4CE9484L J600 engines in loaders, telehandlers and agricultural tractors. Plan replacement during scheduled engine service intervals to avoid unexpected shutdowns under load; typical wear signs include hard starts, stalling at high demand, and rough engine stop. Replace alongside fuel filters, O-rings, and inlet line seals to keep the fuel cut-off system fully refreshed in one maintenance window. Suggested replacement intervals included with every shipment to support your fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

12V Fuel Stop Solenoid Valve 41-9100 42-0100 for Thermo King TK486 SLXi – Service Part

12V Fuel Stop Solenoid Valve 41-9100 / 42-0100, 12V DC, IP67 — replacement for Thermo King TK486, SLXi, SB III and other transport refrigeration units. This solenoid sits at the engine shutdown control point; typical failure shows as sluggish shutoff or no-start after thermal cycling. Plan single-component replacement before insulation breakdown forces full assembly exchange. Fits TK249, TK374, TK388, TK486, SLXi 100–400, T-Series, TriPac APU and more OEM reference numbers 41-9100, 42-0100, 41-4306, 41-7886, 42-1700 (cross-reference only) Recommended replacement interval guidance provided with shipment for fleet planning

In Stock · MOQ 1 pc

View Details

12V Shutoff Solenoid Valve 1G820-60022 for Kubota – Fleet Supply

1G820-60022 Stop Solenoid, 12V, EPDM Dual O-Ring Seals — replacement for Kubota D722, D782, D902 engines in KX018-4, U15, U17 and SCL1000 equipment. Plan replacement at early signs of delayed engine release or erratic shutdown to avoid fuel system over-fueling damage EPDM seals degrade predictably in diesel environments — schedule alongside routine service intervals rather than waiting for failure Sustained aftermarket availability supports aging fleet lifecycle planning when brand support thins Replacement interval guidance included with shipment for fleet maintenance scheduling.

In Stock · MOQ 1 pc

View Details

12V Stop Solenoid 3991167 SA-4941-12 – Service Part for Cummins 4BT

12V Stop Solenoid 3991167 SA-4941-12, replacement for Cummins 4BT engines in Hyundai R130/R170 — IP67 sealed with Class H coil insulation rated to 180°C, supporting up to 500,000 engagement cycles. Delayed shutdown response or intermittent engagement signals winding degradation before complete failure, making proactive replacement at electrical inspection intervals cost-effective Single-component swap preferred over full harness replacement unless recurring faults trace to upstream wiring Replacement interval guidance included with shipment to support fleet-level preventive planning across aging Hyundai R130 and R170 units.

In Stock · MOQ 1 pc

View Details

12V Fuel Shut Off Solenoid SBA185206083 for Shibaura ISM N844 – Service Part

SBA185206083 Stop Solenoid, 12V DC, IP65 Brass Housing — replacement for Shibaura ISM N844 engines and compatible with New Holland TC, Boomer, T, and Workmaster tractor series. Watch for failure signs: no pull-in on cranking, random mid-cycle shutdown, or abnormal coil heating — early swap avoids unplanned fleet downtime. Typical service life reaches 100,000+ duty cycles; plan replacement during scheduled electrical system audits rather than waiting for field failure. Fits over 70 machine variants including TC35DA, Boomer 3050, and T2420 — confirm engine serial for exact application match. Maintenance interval recommendations ship with every order to support your fleet service planning.

In Stock · MOQ 1 pc

View Details

Wear Item Stop Solenoid Compatible with Cummins 5.9L Ford F700

Replacement cycle recommendations ship with every order to support fleet-level maintenance planning.

In Stock · MOQ 1 pc

View Details

12V Fuel Shut Off Solenoid J904630 for CASE – Service Part 12V Fuel Shut Off Solenoid J904630 for CASE – Scheduled Maintenance

J904630 Stop Solenoid, 12V DC, <120 ms Response — replacement for CASE 1845C, 580K, 580SK and Cummins 4B3.9, 6B5.9 engines (cross-reference J904630, 3904630). Solenoid insulation and plunger response typically degrade before total failure, making scheduled replacement during major service intervals more cost-effective than emergency field swaps Brass alloy body with PTFE-coated plunger supports frequent start-stop cycles in rental fleet duty profiles Recommended service interval guidance included with shipment to support preventive maintenance planning

In Stock · MOQ 1 pc

View Details

Service Part Fuel Shut-Off Solenoid AM882277 | Scheduled Maintenance for John Deere 670

AM882277 Stop Solenoid, 12V DC — replacement for John Deere 670, 770, 870, 970, 1070 compact tractors. Schedule proactive swaps when intermittent stalling or erratic fuel cutoff appears during daily start-stop cycles, before corrosion and thermal degradation cause full shutdown failure. Stocking ahead across seasonal work cycles keeps fleets running without emergency part waits. Fits John Deere compact utility tractors in planned maintenance rotations Cross-reference: AM876416, P610-C5V12 Replacement cycle guidance ships with every order to support fleet-level maintenance planning

In Stock · MOQ 1 pc

View Details

12V Shutoff Solenoid Valve 6681513 for Bobcat Skid Steer – Fleet Supply

Stop Solenoid 6681513, 12V, Class H insulation — replacement for Bobcat Skid Steer Loaders 751, 753, S175, S185, T190 and Excavators 325–341. Watch for intermittent shutoff or cold-start hesitation as coil insulation degrades through repeated thermal cycles. Review connectors and relay health alongside solenoid replacement to protect fleet uptime. Continued supply secured for aging Bobcat platforms past thinning brand-direct support.

In Stock · MOQ 1 pc

View Details

Service Part 12V Fuel Shut Off Solenoid 425-35925 for Gehl Mustang

12V Fuel Shut-Off Solenoid 425-35925 for Yanmar-powered Gehl and Mustang skid steers. Monitor for delayed engine shut-off or post-shutdown fuel drip as early wear indicators Plan proactive replacement during routine maintenance windows to avoid unplanned downtime Linked wear with injectors suggests inspecting fuel system components at same service interval Stocking strategy based on fleet size prevents reactive procurement during peak season Replacement interval recommendations included with shipment for fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Stop Solenoid D610-B1V12 68990-015 | Fleet Supply for Kubota Engine

Stop Solenoid D610-B1V12 68990-015 — replacement for Kubota WG750, DF752, DF-750, DF972, D905 engines, 12V DC dual-coil pull-type with 2-terminal configuration. Stocking this solenoid as part of scheduled fleet maintenance avoids unplanned machine downtime when the unit fails to start or shut down reliably. Dual-coil design separates high-current pull-in from low-current hold, reducing thermal stress across repeated cold-start cycles. Zinc-plated steel housing resists corrosion in humid or coastal job sites. Replacement interval guidance ships with every order to support your preventive maintenance planning.

In Stock · MOQ 1 pc

View Details