Belt Drive Systems

Belt Drive Systems

3 Groove Pump Drive Belt 6660994 – Fleet Supply for Bobcat

6660994 3 Groove Pump Drive Belt, 3VX Profile, EPDM + Aramid Fiber — replacement for Bobcat 753, 763, 773, 7753 skid steer loaders. Schedule belt replacement during planned maintenance to avoid unplanned hydraulic downtime and protect pump components from slippage damage Watch for cracking, glazing, or fraying edges as key wear indicators signaling the replacement window Inspect pulley alignment and tensioner spring function during belt service for complete drive system reliability Long-term supply continuity maintained for aging Bobcat skid steer populations across all supported variants.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

V-Belt MIU13962 for Yanmar 3TNV70 John Deere XUV – Fleet Supply

MIU13962 V-Belt (cross-reference), 13 mm × 8 mm EPDM cross-section — replacement for Yanmar 3TNV70 and John Deere Gator XUV series utility vehicles. Replace at scheduled service intervals or when cracking, glazing, or fraying edges appear on the belt surface EPDM compound rated to 150°C suits compact engine bays under sustained heavy-duty operation One SKU covers multiple Gator variants and the Yanmar 3TNV70 platform, simplifying fleet inventory Replacement cycle guidance included with every shipment to support your preventive maintenance planning.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

54″ Deck V-Belt 130-0843 for Toro TimeCutter – Service Part

130-0843 V-Belt, A-Section Deck Belt for Toro TimeCutter — replacement for Toro & Exmark zero-turn mowers, compatible with 54" deck models including SS 5425, MX 5075, MX 5475, and Quest E/S-Series. Synthetic rubber compound rated to 120°C with polyester cord reinforcement Typical wear signs: surface glazing, edge cracking, squeal under load — replace before snap failure to avoid reactive downtime during peak season Stock ahead of mowing season with replacement cycle guidance included for fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

V Belt MD145156 16692 – Fleet Supply for Mitsubishi L3E & Generac

MD145156 16692 V Belt 1451 mm Pitch Length — replacement for Mitsubishi L3E engines and Generac MLT3060MV light towers. Chloroprene rubber compound with fabric cord reinforcement handles high-load duty cycles ±0.3 mm tolerance ensures correct pulley groove engagement Operating range –25°C to +85°C for extreme field deployments Scheduled belt replacement prevents cascading failures in alternator and cooling fan drives. Proactive stocking across your fleet reduces unplanned downtime. Replacement interval guidance included with shipment to support your maintenance planning.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Belt & Tensioner Assembly for Bobcat S510-T595 – Service Part

7257359 Belt & Tensioner Assembly for Bobcat S510–T595 — EPDM rubber with aramid fiber reinforcement, compatible with Bobcat S-Series and T-Series skid steer loaders. Scheduled belt and tensioner replacement prevents unplanned downtime and protects adjacent pulleys from misalignment wear. Replace the full assembly rather than the belt alone to restore correct tension and extend service intervals. Replacement interval recommendations included with shipment to support fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Belt Tensioner Pulley 7269057 for Bobcat Loader – Fleet Supply

Belt Tensioner Pulley 7269057, forged 40Cr steel housing, SPZ groove profile — compatible with Bobcat A770, S630, S650, S750, S770, S850, T630, T650, T750, T770, T870 skid steer and compact track loaders. Watch for bearing noise, uneven belt wear, or tension loss under thermal cycling as early replacement indicators Planned swap prevents cascading damage to belts, fan drives, and cooling components across your fleet Cross-reference 7141788 (interchange reference only) Replacement interval guidance included with every shipment to support long-term fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Belt Set 78-1341 78-603 78-629 – Fleet Supply for Thermo King SB

Belt Set 78-1341 78-603 78-629 – Thermo King SB Series, 3-Piece Drive Belt Kit — includes alternator belt (78-1341), fan belt (78-603), and engine/idler belt (78-629) for SB 100 through SB 400 and Spectrum DE refrigeration units. Replacing all three belts as a matched set at scheduled intervals prevents staggered failures and cumulative downtime across cold-chain fleets Progressive wear signs — cracking, glazing, rib separation — typically appear as operating hours accumulate in continuous refrigeration duty Replacement interval recommendations ship with each order to support long-term fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

V-Belt 32993 for Earthquake Rear Tine Tiller – Service Part

V-Belt 32993, 4LX Profile, 670 mm Length — replacement for Earthquake rear tine tillers, built with high-strength rubber and polyester tensile cords for reliable power transmission. Inspect belt for cracking, cord stretch, and edge fraying at scheduled intervals; replace before catastrophic failure to protect pulleys and avoid mid-season downtime Plan seasonal stock around operating hours and soil conditions; predictable wear supports batch ordering ahead of peak demand Replacement interval guidance and compatibility confirmation provided with every shipment.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Belt Tensioner 3976834 3957434 – Fleet Supply for Cummins ISBE6.7 6CT

Belt Tensioner 3976834 3957434 — replacement for Cummins ISBE6.7, 6CT, 6BT5.9 engines, high-strength gray iron housing, dual-lip NBR seal rated to 120°C. Typically swapped alongside the serpentine belt at scheduled service intervals; spring force degrades over thermal cycles, causing belt flutter and accelerated pulley wear Induction-hardened pivot shaft (HRC 52–56) supports multiple replacement cycles without housing refurbishment IP65 dust protection suits mining, construction, and high-vibration environments Replacement interval guidance included with shipment to support fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Timing Belt Installation Pin 02992037 for Deutz Engine 1011 – Scheduled Maintenance

Timing Belt Installation Pin 02992037, replacement for Deutz 1011/2011 engines, 8.99 mm shaft diameter, HRC 58–62 hardness Fits Bobcat T200, S250, A220, A300, 863, 873, 883 skid steer loaders Worn pins drift out of tolerance and cause belt misalignment, typically replaced during scheduled timing belt service or engine overhaul intervals Single-pin replacement available without full kit exchange, depending on engine service history and adjacent component condition Supports fleet-level stocking across multiple Deutz-powered machines for predictable maintenance planning Replacement interval recommendations included with shipment to support your overhaul scheduling.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

Scheduled Water Pump Belt 78-1492 – Fits Thermo King TK249 T-600

Water Pump Belt 78-1492 for Thermo King TK249, T-600, T-800, EPDM compound with aramid tensile cord rated above 120°C sustained surface temperature. Replacement for Thermo King T-series, MD-series, TS-series, and TriPac APU refrigeration units Typical wear signs include rib face cracking, surface glazing, and cold-start squeal under thermal cycling Inspect tensioner and idler pulleys during belt change — seized bearings are a leading cause of premature failure Low-cost, high-impact consumable best pre-positioned at depot level to prevent cargo loss from unscheduled downtime Suggested replacement intervals included with shipment to support your fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Belt Drive Systems

6735884 Belt Tensioner Pulley for Bobcat T140 T180 – Fleet Supply

6735884 Belt Tensioner Pulley, Forged Carbon Steel (AISI 1045), HRC 58–62 Induction Hardened — compatible with Bobcat T140, T180, T190, T550, T590 Compact Track Loaders. Typical wear signs include squealing, belt slippage, and pulley misalignment; replace at scheduled service intervals before bearing failure damages the belt and cooling circuit. Interchange reference: 6711698 (cross-reference only). Recommended replacement intervals and wear guidance shipped with each order.

In Stock · MOQ 1 pc

View Details