Belt Drive Systems 5 - Heavy Equipment Parts

J911559 Fan Belt | Scheduled Maintenance for CASE Loader 40XT 70XT

J911559 Fan Belt for CASE 40XT, 70XT Loaders, High-Tensile Synthetic Rubber — replacement for scheduled cooling system maintenance across CASE and New Holland loader, tractor, and motor grader fleets. Watch for surface cracking, glazing, or edge wear as indicators to replace before snap failure damages the water pump or head gasket Fits models including 1840, 1845C, 580SK, 90XT, 1150E, and 850K under cross-reference numbers J911559A, 90500580, and 73162121 Plan belt stock around your fleet's service intervals and operating environment to avoid reactive downtime Recommended replacement intervals and inspection guidance for adjacent cooling components ship with every order.

In Stock · MOQ 1 pc

View Details

Drive Clutch Belt J0D-G6241-00-00 for Yamaha Drive2 – Service Part

J0D-G6241-00-00 Drive Clutch Belt, Aramid-Reinforced, 22.5° V-Angle — replacement for Yamaha Drive2 gas golf carts (2017–2025). Typical wear signs include slippage, hesitation under acceleration, and chirping noise from the CVT housing. Replacing the belt on a scheduled interval avoids secondary clutch sheave damage and keeps fleet turnaround predictable. Aramid reinforcement maintains dimensional stability across repeated heat cycles in stop-start duty. Fits Yamaha Drive2 gas models 2017 through 2025 ±0.3 mm dimensional tolerance for consistent sheave engagement Planned replacement supports aging fleet life extension Suggested service intervals and fleet stocking guidance provided with each order.

In Stock · MOQ 1 pc

View Details

Water Pump Belt 50-00162-25 Replacement for Carrier Vector – Fleet Supply

Water Pump Belt 50-00162-25, EPDM Compound with Aramid Tensile Cords — replacement for Carrier Vector X4, X2, and Supra series refrigeration units. Scheduled belt replacement prevents cargo loss and cascading compressor damage during sustained high-ambient operations. Typical wear signs include cracking, glazing, and rib elongation preceding sudden failure. Plan belt changes alongside tensioners and pulleys to consolidate service intervals. Cross-reference: 50-00162-20, 50-60288-21, CA-50-00162-25-AM Recommended replacement intervals provided with shipment for fleet maintenance planning

In Stock · MOQ 1 pc

View Details

Narrow V-Belt 0117-9565 – Service Part for Deutz 1011 2011

Narrow V-Belt 0117-9565, 10×1125 mm, EPDM Compound — replacement for Deutz 1011/2011 series engines including BF4M2011, F3L1011F, F4L2011 and related variants. Scheduled belt replacement at recommended service intervals prevents unplanned cooling and charging system failures, while visible cracking or sidewall fraying signals immediate attention is needed. Fits Deutz-powered excavators, generators, crushers and compactors Withstands continuous operation up to 120°C per ISO 4184 and DIN 2215 Minimum order 1 piece for emergency or planned maintenance Replacement interval recommendations ship with each order to support fleet maintenance scheduling across aging Deutz platforms.

In Stock · MOQ 1 pc

View Details

Alternator Belt 78-1918 78-1543 | Overhaul Grade for TriPac APU

78-1918 78-1543 Alternator Belt, 8-rib EPDM — replacement for Thermo King TriPac APU auxiliary power units, cross-reference interchange for scheduled fleet maintenance. Replace at planned service intervals alongside tensioner and pulley inspection to prevent cascading alternator undercharge and cold-chain risk Aramid-reinforced tensile cord maintains <2.5% elongation across APU duty cycles, reducing glaze and crack progression between overhaul checkpoints Replacement interval guidance ships with each consignment to align with your fleet maintenance schedule.

In Stock · MOQ 1 pc

View Details

Wear Item Fan Pulley Hub Bearing 04429639 Compatible with Ram 2500

BD35-12DU8A Fan Pulley Hub Bearing, 5.9L/6.7L Diesel, Dual-Lip Nitrile Seals — compatible with Ram 2500–5500 series trucks spanning 1998–2012 model years. Replacing this wear item on a mileage-based schedule prevents cascading damage to the water pump, fan clutch, and belt tensioner. Evaluates best when the cooling system shows early wobble or belt whip symptoms, supporting both single-unit swaps and fleet-level preventive planning. Replacement interval guidance included with shipment for maintenance scheduling accuracy.

In Stock · MOQ 1 pc

View Details

Belt Tensioner Kit for Bobcat S130 S300 T200 – Fleet Supply

Belt Tensioner Kit 6662997, 6702474, 6725212 — replacement for Bobcat S130, S300, T200 skid steer and track loaders. Includes idler pulley with 608ZZ sealed bearings, spring arm, and O-ring for complete belt drive service. Replace at first signs of belt squeal, pulley wobble, or spring tension decay — full kit exchange prevents repeat failures from worn mating components Inspect drive belt condition and pulley alignment at the same service interval to extend belt drive system life across mixed S-series and T-series fleets Older Bobcat models like the 873 and 753 remain supported with planned maintenance stocking available. (记录ID: 9504)

In Stock · MOQ 1 pc

View Details

Scheduled Maintenance V-Belt 178509 – Fits Cummins N14 NT855 NTA855

V-Belt 178509 for Cummins N14 NT855 NTA855, CX Profile, 22mm Top Width — replacement for OEM cross-reference 178509 and 76107717. 1147mm effective length, polyester-cord reinforced rubber construction Fits NH855, NH220, NH250, and NTA855 engine variants Schedule replacement at major service intervals to prevent unplanned cooling and charging downtime Watch for cracking, glazing, and edge fraying as end-of-life indicators Consider refreshing tensioners and idler pulleys during the same service window Aging Cummins-powered fleets remain supported with verified dimensional tolerances and consistent supply continuity.

In Stock · MOQ 1 pc

View Details

V-Belt 3288497 for Cummins Engine – Long-Life Scheduled Maintenance Part

V-Belt 3288497 for Cummins ISB, QSB & 6CTA Engines — EPDM compound with aramid cord reinforcement, 32.5° V-angle, replacement for belt-drive systems on B and C Series platforms. Plans preventive replacement at scheduled service intervals to protect alternator bearings, water pump, and crankshaft damper from cascading damage Sidewall glazing, edge fraying, or audible squeal under load signal replacement is overdue — inspect tensioner and pulley grooves at the same time Multi-belt configurations benefit from full-set budgeting to avoid repeat downtime when remaining belts carry similar operating hours Replacement interval recommendations ship with every order to support fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Belt R123307 for John Deere Engine 3.9 4.5 6.8 – Service Part

R123307 Serpentine Drive Belt, high-tensile EPDM rubber with aramid cords, compatible with John Deere 3.9L, 4.5L, 6.8L engines — this belt drives multiple accessories including alternator, water pump, and AC compressor in a single loop. Scheduled replacement during routine service intervals prevents cascading failures across cooling and electrical systems, and replacing tensioners alongside worn belts extends service life. Recommended maintenance intervals included with shipment for fleet planning.

In Stock · MOQ 1 pc

View Details

Drive Pump Belt 6726898 for Bobcat Loader – Fleet Supply

Drive Pump Belt 6726898 (cross-reference), flat cogged design with 3 grooves, 57.4-inch length and 1.19-inch width, fiber-loaded backing with cord reinforcement — compatible with Bobcat skid steer and track loaders including 753, 763, S130, S185, T140, and T190 series. Schedule replacement before visible cracking, squealing under load, or elongation-induced slack leads to cascading damage on pump couplings and idler pulleys Inspect tensioner and pulley condition during the same service window to avoid repeat downtime Supports aging 753/763/773 generations with reliable aftermarket supply when brand availability thins Replacement interval guidance included with shipment to support fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Wear Item Drive Belt 422280651 422280652 Compatible with Can-Am UTV

Drive Belt 422280651 422280652, 22mm width, EPDM compound — compatible with Can-Am Maverick X3 Turbo (2017–2021), Defender HD8/HD10 (2016–2018). HTD tooth profile with aramid reinforcement withstands continuous 130°C service in CVT systems. Replace at scheduled intervals alongside clutch face and sheave inspection to avoid cascading drivetrain damage Thermal degradation on turbo models under sustained load shortens belt life — plan stock accordingly Fleet replacement cycle recommendations included with every shipment.

In Stock · MOQ 1 pc

View Details