Belts 4 - Heavy Equipment Parts | XUNPO Global Distribution

Fan Belt 90916-02975-71 for Toyota 4Y Engine – High-Durability Replacement

Stop unexpected downtime and costly forklift idling — this fan belt 90916-02975-71 for Toyota 4Y engine delivers OEM-matched grip and heat resistance, so your 7FGU25, 7FGU32, or 8FG30B stays cool and running through back-to-back shifts. Engineered with high-tensile EPDM rubber and precision-curved rib geometry — critical for maintaining optimal tension on 4Y-series crank pulleys without slippage Replaces not just OEM 90916-02975-71 but also cross-references TY909160297571 and other common variants — no guesswork when ordering Stocked and ready to ship from our Guangzhou warehouse: get it in 2–5 working days, even for single-piece urgent repairs Backed by our 6-month warranty against premature cracking or stretch — because real-world forklift duty cycles demand real-world durability

In Stock · MOQ 1 pc

View Details

Deck Belt 108-7192 for Toro Z480 Zero-Turn Mower – Heavy-Duty Replacement

Stop losing mowing time to belt slippage or sudden breakage — this heavy-duty 108-7192 belt delivers consistent, vibration-free deck drive power for your Toro Z480, even under full load and high grass conditions. Fits Toro 74352 & 74353 (Z480) with serial numbers 250000001–250999999 (2005) and 260000001–260999999 (2006) — verified against original OEM mounting geometry and pulley wrap angle Replaces part numbers 108-7192, 087192, and 2011A136R — no guesswork, no misfit Reinforced aramid tensile cords and heat-resistant EPDM compound resist stretching and cracking — critical for zero-turns where rapid directional changes stress the belt Ships from our Guangzhou warehouse in 2–5 working days, with real-time tracking — no more waiting weeks for OEM backorders

In Stock · MOQ 1 pc

View Details

Deck Drive Belt Kit for Toro 30″ TimeMaster – Direct Replacement

Stop losing mowing time to belt slippage, snapping, or misalignment — this Deck Drive Belt Kit for Toro 30" TimeMaster – Direct OEM Replacement delivers instant, rock-solid deck drive performance on models 20199, 20200, 20975–20978. Built with aramid-reinforced tensile cords and precision-molded cog geometry, it grips the pulleys like factory-fresh — no more “walking off” during aggressive turns or wet grass. Replaces 121-5765, 120-3335, and 120-9470 — all in one kit, with correct tensioner arm bushing pre-installed Fits *exactly*: matches original center-to-center pulley spacing (critical for avoiding premature bearing wear) Includes dual-density idler pulley spacer — the subtle but vital part most generic kits omit Ships same day from Guangzhou warehouse; no waiting weeks for OEM backorders

In Stock · MOQ 1 pc

View Details

Clutch Drive Belt 3211218 for Polaris Ranger 1000 & Pro XD – High-Durability OEM Replacement

Stop losing uptime to premature belt failure — this Polaris clutch belt delivers consistent, vibration-free power transfer and lasts significantly longer than standard replacements, especially under heavy load or frequent stop-start operation. Exact OEM-equivalent fit for 3211218 belt applications — no guesswork on tension or alignment Engineered with aramid-reinforced tensile cords and heat-resistant compound to resist glazing and edge chunking — a known failure mode on high-torque Ranger 1000 and Pro XD Full-Size Gas models Verified compatible across 30+ Ranger and Pro XD variants from 2020–2024, including Crew EPS, Trail Boss, and Winter Prep trims Ships from our Guangzhou warehouse in 2–5 working days — no waiting weeks for OEM backorders

In Stock · MOQ 1 pc

View Details

V Belt MD145156/16692 for Mitsubishi L3E Engine & Generac MLT3060MV Light Tower

Stop unexpected light tower shutdowns and engine stalling—this genuine-spec V-belt MD145156/16692 delivers OEM-equivalent tension retention and heat resistance for continuous-duty operation on your Generac MLT3060MV and Mitsubishi L3E-powered T120SS units. Exact fit for Generac MLT3060MV and Mitsubishi L3E engines — no guesswork, no trial-and-error belt swaps Manufactured to ISO-certified factory specs with aramid cord reinforcement (not polyester) — critical for high-RPM generator drive applications Ships same-day from our Guangzhou warehouse — bypass 3–4 week OEM lead times and keep your fleet running Includes full cross-reference: MD145156, 16692, and compatible with V-belt MD145156 replacement belt demand across North America & Middle East service networks

In Stock · MOQ 1 pc

View Details

Belt Set for Carrier X4 7300 & 7500 – Direct OEM Replacement

Stop downtime and avoid mismatched belts that throw off tension, alignment, or pulley wear — this Carrier belt set delivers true OEM-equivalent fit and performance for your X4 7300 & 7500 in one verified kit. Exact 3-piece configuration: 1×50-00178-16 (main drive), 1×50-00162-25 (tensioner), 1×50-00178-27 (accessory) — no guesswork, no missing links Pre-matched by pitch, angle, and tensile strength to prevent premature slippage or harmonic vibration in high-RPM carrier cooling circuits Ships from Guangzhou warehouse same day if ordered before 3 PM CST — no waiting weeks for OEM backorders Built to ISO 9001-spec rubber compounds with aramid cord reinforcement, not polyester — critical for sustained 7300/7500 duty cycles

In Stock · MOQ 1 pc

View Details

OEM V-Belt MIU13962 for Yanmar 3TNV70 – Heat-Resistant EPDM Drive Belt

Stop unexpected breakdowns and costly downtime—this OEM V-Belt MIU13962 for Yanmar 3TNV70 delivers factory-grade reliability in high-heat engine bays where standard belts fail prematurely. EPDM compound withstands up to 150°C—critical for Yanmar 3TNV70’s tight, heat-trapped compartments where NBR belts crack within months Reinforced with high-tensile polyester cord (not nylon or rayon) for zero stretch and precise tension retention across John Deere XUV825E/XUV590i drivetrain cycles Fits seamlessly without shimming or pulley adjustment—verified against OEM dimensional specs including pitch length 1396mm and section width 13mm No more guessing: pre-lubricated EPDM surface eliminates squeal on cold start and resists ozone degradation longer than legacy rubber blends

In Stock · MOQ 1 pc

View Details

Fan Belt 84331239 for New Holland L221–L230 & C227–C238 Loaders – Heavy-Duty Replacement

Stop unexpected shutdowns and keep your New Holland loader running strong through long shifts — this fan belt 84331239 for New Holland L221–L230 & C227–C238 loaders delivers OEM-matched tension retention and heat resistance, even under continuous high-load operation. Exact-fit replacement for L221, L223, L225, L228, L230, C227, C232, and C238 — no guesswork, no adapter kits needed Manufactured with aramid-reinforced EPDM compound — the same material spec used by top-tier aftermarket brands to prevent premature cracking at the rib roots Ships from our Guangzhou warehouse in 2–5 working days, with MOQ just 1 piece — ideal when downtime costs more than the part Backed by XUNPO’s 6-month warranty against manufacturing defects and real-time logistics tracking

In Stock · MOQ 1 pc

View Details

Kubota mower deck belt K5763-34711 for RCK60-30B and RCK60B-75B replacement

Stop downtime and get your Kubota mower deck running smoothly again — this Kubota mower deck belt delivers OEM-equivalent grip, heat resistance, and tension retention so your 60-inch deck cuts cleanly without slippage or premature stretch. Fits RCK60-30B, RCK60B-75B, BX2200, G2160, and 12+ other Kubota models — verified cross-reference for exact pulley alignment and deck drive geometry Replaces K5763-34711, K5763-34710, K5763-34712, and 13+ alternate part numbers — no more guessing which variant matches your serial range Made with aramid-reinforced EPDM compound (not basic rubber) — critical for resisting oil mist, UV degradation, and the high-frequency flexing unique to Kubota’s dual-belt 60" deck layout Ships from our Guangzhou warehouse in 2–5 working days — no waiting weeks for OEM backorders or risking counterfeit belts from unknown sources

In Stock · MOQ 1 pc

View Details

Transaxle Variation Belt for Husqvarna & Ariens Lawn Tractors – Direct OEM Replacement

Stop losing hours to belt slippage, hydrostatic hesitation, or unexpected shutdowns—this transaxle variation belt delivers OEM-matched tension retention and torque transfer so your Husqvarna or Ariens lawn tractor shifts smoothly, all season long. Exact-fit replacement for high-stress hydro transaxles—including the critical 936048/936049 models with dual-cam engagement geometry Eliminates premature stretching and side-load wear thanks to reinforced aramid cord construction (not just polyester) Verified cross-reference for 23+ model numbers—no guesswork when matching to your 917250830 or 936075 chassis Ships from Guangzhou warehouse in 2–5 working days, MOQ just 1 piece—ideal for urgent field repairs

In Stock · MOQ 1 pc

View Details

Drive Clutch Belt J0D-G6241-00-00 for Yamaha Drive2 Golf Cart 2017–Up

Stop unexpected breakdowns and get back on the course faster with a Yamaha Drive2 clutch belt that delivers OEM-level durability without the OEM wait or markup. Built to match the exact torque transfer profile and heat resistance specs of the original J0D-G6241-00-00 — including the critical 12° included angle and dual-layer aramid cord construction — this belt stays seated under load and resists glazing even after repeated high-RPM shifts. Fits Yamaha Gas Golf Cart Drive2 models from 2017 onward — verified against factory service diagrams Replaces both J0D-G6241-00-00 and J0DG62410000 interchangeably No stretching, no slippage: precision-molded poly-V profile ensures consistent drive ratio from day one Ships same-day from our Guangzhou warehouse — no backorders, no guesswork

In Stock · MOQ 1 pc

View Details

V-Belt 32993 for Earthquake Rear Tine Tillers – High-Strength Rubber with Polyester Cords

Stop unexpected shutdowns and costly downtime during critical tilling jobs — this v-belt 32993 delivers OEM-level grip and fatigue resistance for Earthquake rear tine tillers, even under heavy, continuous load. Engineered with high-tensile polyester-cord construction (not cheaper polyamide-only) — the real differentiator for long service life in high-slip applications Precisely sized at 670 mm (La) with true 4LX profile — ensures correct wrap angle and tension on the dual-pulley rear tine drive system Direct-fit replacement for part number 32993; no guesswork, no delays waiting for OEM lead times Made to match original stretch-and-recovery behavior — avoids premature slippage or over-tensioning that damages bearings

In Stock · MOQ 1 pc

View Details