Glow Plug 4 - Heavy Equipment Parts | XUNPO Global Distribution

[result]Glow Plug 8-98290-755-0 for Isuzu 4JJ1 4HK1 – Scheduled Maintenance[/result]

Glow Plug 8-98290-755-0 for Isuzu 4JJ1 / 4HK1, New Aftermarket — replacement for cold-start systems in NPR, FTR, FVR and W-series commercial trucks. Scheduled replacement before cold season prevents staggered failures and repeat shop visits across the fleet Replace as a matched set to maintain uniform heat range and service life on all cylinders Check relay and timer module during service to address root cause of premature plug wear Maintenance interval guidance supplied with each order to support fleet planning.

In Stock · MOQ 1 pc

View Details

Glow Plug 3974953 | Service Part for Kubota Bobcat Loaders

Glow Plug 3974953 for Kubota D1402 / V1702 Engines, Nickel-Chromium Heating Element — replacement for Bobcat 643, 645, 743, 743B skid steer loaders and 1600 wheel loader. Predictable wear item: slow cranking and incomplete combustion signal end-of-life before total failure Plan pre-winter fleet replacement to avoid unplanned cold-start downtime across Kubota-powered machines Single-component swap, but inspect relay, timer, and wiring during scheduled service intervals Aging Bobcat loader models remain supported with sustained aftermarket supply and replacement interval guidance included with shipment.

In Stock · MOQ 1 pc

View Details

Glow Plug 16281-65510 for Kubota D905 D1005 D1105 D1305 – Service Part

16281-65510 Glow Plug — replacement for Kubota D905, D1005, D1105, D1305 series engines, 3-piece pack Scheduled replacement of glow plugs at seasonal or hourly intervals prevents cold-start failures and unplanned downtime across agricultural and construction fleets Replace as a full set to maintain even pre-heat across cylinders and reduce starter motor and battery strain Cross-reference interchange numbers include 16241-52032, 16241-52033 for older equipment builds Continuous supply available for legacy Kubota-powered machines, with machine and parts sourced from one account.

In Stock · MOQ 1 pc

View Details

Glow Plug 1G679-65512 for Kubota Z602 V2403 – Scheduled Maintenance

Glow Plug 1G679-65512 for Kubota Z602, D902, V1505, V2403 — New Aftermarket replacement (cross-reference 1G67965512) Plan cold-start reliability across your fleet by stocking this wear item before winter demand peaks; replacing the full set at scheduled intervals keeps cylinder-to-cylinder consistency and reduces linked strain on the battery and starter motor. Older Kubota platforms remain actively supported with long-term supply commitment for your maintenance budget planning.

In Stock · MOQ 1 pc

View Details

3Pcs Glow Plug 16851-65510 – Kubota Fleet Supply

Glow Plug 16851-65510, Nickel-Chromium Heating Element — compatible with Kubota D640, D722, D902, D1105, and D1505 diesel engines across tractors, excavators, and utility vehicles. Typically replaced as a matched set when cold starts show extended cranking or white smoke, preventing uneven cylinder ignition. Keep stock ahead of seasonal temperature drops to avoid unplanned fleet downtime. Replacement interval recommendations ship with every order.

In Stock · MOQ 1 pc

View Details

4Pieces Glow Plug 6655233 for Kubota Bobcat – Fleet Supply

6655233 Glow Plug 4-Piece Set for Kubota V-series and Bobcat diesel engines — replacement for cold-start reliability across aging fleet assets. Replacing glow plugs as a matched set at scheduled service intervals prevents staggered single-cylinder failures and avoids repeated cold-start downtime Watch for extended cranking, white smoke on startup, or uneven idle in cold conditions as indicators that replacement is due before complete failure Supports fleet-level preventive maintenance planning for excavators, skid steers, loaders, and articulated tool carriers past thinning brand support

In Stock · MOQ 1 pc

View Details

Glow Plug H1 655 13721655 ED0021000890S – Scheduled Maintenance

Glow Plug H1 655 13721655 ED0021000890S — 12.5V, M12x1.25 — compatible with Lombardini, Kohler, and Deutz diesel engines used in excavators and heavy machinery. Replacing glow plugs as a set before cold season prevents uneven cylinder preheating and keeps fleet uptime predictable across aging engine platforms. Cross-reference ED0021000890S verified; replacement interval guidance included with shipment for maintenance planning.

In Stock · MOQ 1 pc

View Details

Glow Plug 16693SRV Replacement for Mitsubishi L3E Long-Life

Glow Plug 16693SRV for Mitsubishi L3E engines — replacement for Generac MLT6SMD light tower applications, nickel-chromium heating element with ceramic insulator. Replace glow plugs at early signs of extended cranking or white smoke on cold start to prevent battery and starter strain across your fleet's service life. Scheduled replacement as a wear item keeps light towers reliable through cold seasons without reactive machine downtime. Maintenance interval guidance ships with every order to support your seasonal planning.

In Stock · MOQ 1 pc

View Details

Glow Plug 1G679-65512 for Kubota Z602 V2403 D902 V1505 – Fast-Start Cold Weather Ignition

Start your Kubota Z602 or V2403 engine reliably—even in sub-zero cold—without waiting, guessing, or risking downtime. The 1G679-65512 glow plug delivers precise pre-heating voltage and thermal ramp-up timing calibrated to Kubota’s original cold-start logic, so your BX2370, RTV1140CPX, or KX71 fires on the first crank, every time. Direct-fit replacement for Kubota Z602, V2403, D902 & V1505 engines—no adapters or modifications needed Features ceramic-sheathed heating element with 11V–14V adaptive resistance curve (critical for stable idle after cold start) Ships from Guangzhou warehouse same day—no OEM backorders or 3-week waits Backed by XUNPO’s 6-month warranty and real-time technical support from Kubota-certified parts engineers

In Stock · MOQ 1 pc

View Details

Glow Plug 6655233 for Kubota V1903/V2003T/V2203 – Fast-Acting Cold-Start Replacement

Get reliable cold-weather starts every time — no more cranking delays, misfires, or frustrating engine hesitation on Kubota V1903/V2003T/V2203 and Bobcat skid steers like the 753. This 6655233 glow plug delivers precise thermal output calibrated to match OEM resistance curves (1.2–1.8Ω cold), ensuring optimal preheat timing without overloading the controller — a critical detail many aftermarket plugs get wrong. Fits Kubota engines: V1903 2EB, V2003T (Tier I & II), V2203 2EB, D1703-E2B, and D1703-M-E3B Direct replacement for Bobcat 751, 753, 763, 773, S160, S175, S185, T190, and more — verified against factory service manuals 4-piece kit includes matching ceramic insulators and torque-spec washers — no guesswork during installation Ships from Guangzhou warehouse same day — no waiting weeks for OEM backorders

In Stock · MOQ 1 pc

View Details

4 Glow Plugs 7030400 for Doosan D18/D24 & Bobcat S5xx/T5xx Cold Start

Get reliable cold starts every time — even in sub-zero conditions — with these genuine-spec glow plugs, Doosan glow plug, Bobcat S570 glow plug, 7030400 glow plug for Doosan D24, replacement glow plugs for Bobcat T590 cold start. No more frustrating crank-and-stall cycles or costly downtime waiting for OEM parts. Fits Doosan D18/D18N/D24 engines and Bobcat S5xx/T5xx skid steer & track loaders — verified cross-reference to factory specs Each plug features a 11V ceramic heating element with integrated thermal cut-off (critical for preventing coil burnout on repeated cold-cycle startups) Includes all 4 units with matching torque-spec mounting bases — ready for direct drop-in replacement Ships same-day from our Guangzhou warehouse; no MOQ, no wait, no counterfeit risk

In Stock · MOQ 1 pc

View Details

Glow Plug 16851-65510 for Kubota D-Series Engines – Fast-Start Cold Weather Ignition

Get reliable, fast cold-weather starts every time — no more cranking, no more frustrating delays before your Kubota fires up. This kubota glow plug delivers consistent pre-heating performance across D-Series engines, especially critical for operators in chilly climates or early-morning jobsites where downtime costs money. Fits 12+ D-Series and Z-Series engines including D722, D905, D1105, Z482, and Z602 — verified for correct thread pitch (M10×1.25) and heat-up curve to match OEM specs 3-piece set covers full cylinder bank replacement — eliminates mismatched aging plugs that cause uneven combustion and hard starting Replaces 8 part numbers including 16851-65510, 16851-65512, and cross-referenced variants — no guesswork when ordering spares Tested to 12V/4.5A draw with 1200°C tip temp in under 10 seconds — meets Kubota’s thermal ramp requirement for safe, complete fuel ignition

In Stock · MOQ 1 pc

View Details