Belt Drive Systems 4 - Heavy Equipment Parts

Clutch Drive Belt M174096 for John Deere Gator XUV – High-Durability Replacement

Stop losing uptime to belt slippage or premature failure on your John Deere Gator XUV — this high-durability John Deere Gator belt delivers consistent, vibration-free power transfer even under heavy loads and frequent stop-start operation. Fits all major XUV 800–865 series models powered by the Yanmar 3TNV70 engine — including hard-to-match S4 and R-series variants Exact OEM-equivalent pitch, width, and aramid-reinforced construction — critical for proper clutch engagement timing and heat dissipation Replaces M174096, M158189, M173005, UC33933, and 31C4573 with verified dimensional and tensile compliance Ships from our Guangzhou warehouse in 2–5 working days — no waiting weeks for OEM backorders

In Stock · MOQ 1 pc

View Details

Wheel Drive Belt 265-458 for Exmark Metro Mowers – High-Durability Replacement

Stop losing hours to belt slippage, sudden breakage, or mismatched replacements that wear out in half a season — this wheel drive belt 265-458 delivers OEM-level grip and longevity for Exmark Metro walk-behind mowers, right out of the box. Exact-fit replacement for 32", 36", 48", and 52" Metro models — including critical SN ranges like 790000–849999 (2009) and 312000000–312999999 (2012), where factory tolerances tighten Reinforced aramid tensile cords + heat-resistant EPDM compound — the same spec used by top-tier aftermarket brands to prevent stretch-induced speed drift Covers all major cross-references: 1323288, 6586BR, 265-458, and even legacy numbers like 12-9257 and 75-177 — no more juggling multiple SKUs for one mower line Ships from Guangzhou warehouse in 2–5 working days — no waiting weeks for OEM backorders

In Stock · MOQ 1 pc

View Details

Drive Belt 7177671 for Bobcat S630/S650/T630/T650/T870 – EPDM Cogged V-Belt

Stop unexpected downtime and costly repairs — this bobcat drive belt delivers OEM-matched performance with EPDM rubber’s superior heat and ozone resistance, so your S630, S650, T630, T650 or T870 stays up and running longer between replacements. Engineered as a true 3VX banded cogged V-belt (4×10×1670La) — the exact profile needed for proper tension distribution and reduced slippage on high-RPM Bobcat hydrostatic drives Aramid tensile cords + aramid fabric reinforcement prevent stretch and tooth shear — critical for loaders under continuous heavy-load cycles Non-returnable, so we verify fit before shipping: just send your machine’s serial number and we’ll cross-check against Bobcat’s latest service bulletins In-stock in Guangzhou — ship same day if ordered before 3 PM CST, with real-time tracking to your workshop or jobsite

In Stock · MOQ 1 pc

View Details

Belt 120-3335/265-610 for Toro TimeMaster & Exmark Commercial Mowers

Stop downtime on your 30" Toro TimeMaster or Exmark S-Series mower — this belt 120-3335/265-610 delivers OEM-equivalent grip and longevity, so you keep mowing through heavy commercial schedules without slippage or mid-shift breakage. Fits all major serial ranges for Toro models 20199, 20200, 22200, 22210 and Exmark ECS180CKA30000, ECX180CKA30000, and ECKA30 — verified down to the last digit of your SN label Manufactured with aramid-reinforced tension cords (not just polyester) — the same construction used in factory-spec drive belts to resist stretch under continuous high-torque load No guesswork: replaces both 120-3335 and 265-610 interchangeably, eliminating the risk of ordering the wrong version for your engine year or deck configuration Ships same day from our Guangzhou warehouse — no waiting weeks for OEM backorders or counterfeit delays

In Stock · MOQ 1 pc

View Details

V-Belt Fan Belt 1G062-97012 for Kubota D905–V1505 Engines – High-Tensile Replacement

Stop unexpected overheating and costly downtime — this Kubota fan belt delivers OEM-matched tension retention and heat resistance for reliable cooling on high-hour D905 and V1505 engines. Built with aramid-reinforced tensile cords (not just polyester), it resists stretch and slippage far longer than generic belts — a real difference you’ll feel after 200+ hours of continuous operation. Fits Kubota tractors including F2680E, F3080, B7610, ZD1511RLF, and more — verified against factory service manuals Exact replacement for part number 1G062-97012 (also listed as 1G06297012) Engine-specific fit for D905, D1005, D1105, V1205, V1305, and V1505 — no guesswork, no misalignment Ships from Guangzhou warehouse same day — no waiting weeks for OEM backorders

In Stock · MOQ 1 pc

View Details

Drive Belt & Tensioner Assembly for Bobcat S510–T595 – EPDM Heat-Resistant

Stop unexpected downtime and costly repairs on your Bobcat S510–T595 — this Drive Belt & Tensioner Assembly for Bobcat S510–T595 – EPDM Heat-Resistant delivers OEM-matched durability with faster shipping and no MOQ hassle. Built for high-cycle loaders, it eliminates the stretch-and-slip common in aging tensioner setups — especially critical on S595/T595 models where belt misalignment triggers premature pulley wear. EPDM compound withstands continuous 120°C+ underhood temps — no cracking or hardening like inferior CR/NBR belts Includes full assembly: drive belt (7257359), tensioner bracket (7273503), rocker arm (7274780), pulley (7167165), and all fasteners — no cross-referencing headaches Pre-tested for correct spring force (7145358) and aramid cord tension — ensures consistent 3VX profile tracking under load Ships from Guangzhou warehouse same day if ordered before 3 PM CST — no waiting weeks for OEM backorders

In Stock · MOQ 1 pc

View Details

Belt 50-00178-19 for Carrier Ultima XTC & X2 Refrigeration Units

Stop unexpected downtime and costly service calls — this Carrier belt 50-00178-19 delivers OEM-equivalent performance for Ultima XTC and X2 refrigeration units, with precise tension retention even under heavy-duty transport cycles. Direct replacement for 50-00178-19, CP10615, and all listed cross-references — no guesswork on fitment Engineered with aramid cord reinforcement (not just polyester) to resist stretch and slippage in high-heat trailer environments In-stock in our Guangzhou warehouse — ships in 2–5 working days, even for single-piece orders Backed by XUNPO’s 3–12 month warranty against manufacturing defects — because counterfeit belts cost far more than they save

In Stock · MOQ 1 pc

View Details

Harley Davidson 40022-91 Drive Belt for Sportster 883/1200 (1991–2003)

Stop losing ride time to belt slippage or unexpected breakage — this OEM-replacement quality Harley Davidson drive belt delivers the same durability and precision fit as factory original, without the OEM markup or 3-week wait. Fits all Sportster 883/1200 XLH models from 1991–2003 — including critical variants like the 883 Hugger XLH and 1200 Custom XLC that often get mis-matched with generic belts Uses high-tensile aramid tensile cords (not fiberglass) — the same spec used in genuine HD replacement belts to prevent stretch-induced timing drift Cross-compatible with Buell M2 Cyclone, S3 Thunderbolt, and XB9R Firebolt — no need to juggle multiple SKUs for mixed garages Backed by our 6-month warranty and real-time logistics tracking — because downtime on a weekend ride isn’t negotiable

In Stock · MOQ 1 pc

View Details

Aftermarket Mitsuboshi REMF-1345 fan belt for excavator cooling systems

Stop unexpected shutdowns and overheating during critical jobs — this aftermarket Mitsuboshi REMF-1345 fan belt delivers OEM-equivalent grip and heat resistance, so your excavator’s cooling system stays stable under load. Built to match the exact pitch length (1345 mm), top width (22 mm), and angle (40° V-belt profile) of genuine Mitsuboshi specs, it eliminates slippage and premature wear that plague generic belts. Ships same day from our Guangzhou warehouse — no 2–4 week OEM waits Fits CAT 330/349, Komatsu PC360/PC460, Hitachi ZX350/470 & other Tier 3–4 machines with REMF-1345 cooling circuits Reinforced EPDM rubber compound resists oil, ozone, and thermal cracking — a must for high-hour fleet operations MOQ just 1 piece: test-fit before bulk orders, no minimum pressure

In Stock · MOQ 1 pc

View Details

Timing Belt Installation Pin 02992037 for Deutz 1011/2011 Engines – Precision Fit for Bobcat T200 S250 A220

Stop timing belt misalignment before it costs you hours of downtime — this 02992037 timing belt pin locks the crank and cam sprockets in perfect OEM-specified phase during Deutz 1011/2011 engine rebuilds. No more guessing, no more rework. Fits all critical Deutz variants: F4L1011F, BF4L1011F, F3M1011F, and 15+ others — including the high-torque BF4M1011F used in Bobcat T200 and S250 loaders Direct replacement for OEM 02992037 (also cross-references 00301093 & 7041565) — precision-ground to 0.005mm tolerance for interference-free insertion Prevents catastrophic valve-to-piston contact on interference engines — a single misaligned tooth ruins a head gasket or worse Includes 2 pins per pack: one for installation, one as field backup — because your shop never runs out mid-job

In Stock · MOQ 1 pc

View Details

52″ Deck Belt for Toro Grandstand Mowers – Heavy-Duty Replacement

Stop losing hours to belt slippage, snapping, or misalignment on your Toro Grandstand—this 52" deck belt for Toro Grandstand mowers delivers OEM-equivalent grip and tension retention, even under heavy multi-blade loads and high-RPM operation. Fits Toro 74505, 74519, 74529, and 79505 Grandstand & Multi Force models—verified with precise 131-1122 / 145-3482 cross-reference Reinforced aramid tensile cords and heat-resistant EPDM compound prevent stretch and edge fraying—the #1 failure point on aftermarket 52 inch belts Ships from our Guangzhou warehouse in 2–5 working days, MOQ just 1 piece—no waiting weeks for OEM backorders Backed by XUNPO’s 6-month warranty against manufacturing defects and real-time technical support for correct installation

In Stock · MOQ 1 pc

View Details

7″ V-Groove Fan Pulley 3919624 for Cummins & Hyundai Excavators

Stop unexpected fan belt slippage and overheating on your Cummins or Hyundai excavator — this 7" V-Groove fan pulley 3919624 delivers OEM-equivalent grip and alignment, keeping coolant flow stable even under sustained high-load operation. Built to match the exact pitch diameter and groove angle of factory-spec pulleys, it eliminates premature wear caused by mismatched taper or off-center rotation — a common failure point with generic replacements. Direct fit for R210W-9A, R430LC-9A, and Cummins 6B5.9 engines — no machining or adapters needed Replaces 3919624, 3908819, and 3903221 — verified cross-reference against Cummins’ latest service bulletins Made from heat-treated SAE 1045 steel with precision-ground V-grooves — critical for maintaining proper belt tension across full RPM range Backed by XUNPO’s 6-month warranty and same-day part verification — because downtime costs more than the pulley

In Stock · MOQ 1 pc

View Details