Belt Drive Systems 5 - Heavy Equipment Parts

V-Belt 9001A-96003 for Toyota 4Y Engine Forklifts – High-Durability Replacement

Stop downtime from snapped or slipping belts — this V-belt 9001A-96003 delivers OEM-matched grip and heat resistance for Toyota 4Y-engine forklifts, so your 7FG/8FG series stays running through heavy shifts. Fits 42+ model variants — including hard-to-match FGZN, 7FGCU, and 8FGU series with dual-belt configurations Manufactured to exact 13.5° included angle and 960mm pitch length — critical for proper tension and pulley alignment on 4Y crankshaft drives Eliminates guesswork: verified cross-reference for genuine 9001A-96003 replacement (not a generic “equivalent”) Ships same-day from Guangzhou warehouse — no waiting weeks for OEM backorders

In Stock · MOQ 1 pc

View Details

Drive Belt 105245801 for Club Car Carryall & Precedent – High-Durability Replacement

Stop downtime and costly repairs caused by cracked, stretched, or slipping drive belts — this Club Car drive belt delivers OEM-matched durability and precise fit for real-world utility vehicle use. Built with reinforced aramid tensile cords and a heat-resistant EPDM compound, it handles repeated load cycles on Carryall 550/900 and Precedent models without premature elongation — a common failure point with generic belts. Fits Club Car Precedent, Carryall 300/500/550/700/900 Turf, Onward & Cafe Express Direct replacement for part numbers 105245801 and 10G3758 Features the exact 10.5° included angle and 1065 mm pitch length required for proper CVT engagement Ships from Guangzhou warehouse — most orders ship in 2–5 working days, MOQ just 1 piece

In Stock · MOQ 1 pc

View Details

Water Pump Belt 50-00162-25 for Carrier Vector & Supra Refrigeration Units

Stop unexpected downtime on your Carrier refrigeration units — this genuine-spec Carrier water pump belt delivers OEM-equivalent grip and heat resistance to keep Vector X4 7500 and Supra 750 systems running smoothly through long hauls and high ambient temps. Fits 12+ Carrier transport models including X2 2500R, X4 6600 MT, and Supra 650 — no more cross-referencing mismatched belts Replaces 14 part numbers including 50-00162-25, 50-60288-21, and CA500016225AM — one SKU covers your entire fleet’s legacy and current units Manufactured with EPDM rubber + aramid tensile cords — the same compound Carrier specifies for >15,000-mile service life under continuous load Pre-stretched and laser-aligned at factory — eliminates break-in slippage that causes early overheating in high-cycle applications

In Stock · MOQ 1 pc

View Details

Drive Belt 154537-001 for Vermeer BC600XL Brush Chipper – Heavy-Duty Replacement

Stop unexpected downtime and costly delays when your Vermeer BC600XL brush chipper stalls mid-job — this heavy-duty Vermeer BC600XL drive belt, 154537-001 delivers OEM-equivalent power transfer and heat resistance for sustained high-RPM operation. Engineered with aramid tensile cords and EPDM rubber compound — the same spec used by top-tier aftermarket suppliers to prevent stretch and slippage under load Fits precisely without modification: matches original pulley groove angles and center-to-center tension specs for BC600XL’s dual-belt drive system Ships from our Guangzhou warehouse in 2–5 working days — no waiting weeks for OEM backorders Backed by XUNPO’s 6-month warranty against manufacturing defects, plus free technical verification before you order

In Stock · MOQ 1 pc

View Details

Alternator Pulley 3926858 for Cummins ISB6.7 ISC8.3 QSB6.7 – Direct-fit Replacement

Stop unexpected alternator belt slippage and engine downtime on your Cummins ISB6.7, ISC8.3, or QSB6.7 — this 3926858 alternator pulley delivers OEM-equivalent fit and torque transfer right out of the box. Built to match the exact 10° taper angle and 45 mm bore diameter required for Cummins CM2250/CM2350-series crankshaft mounting, it eliminates the guesswork and costly misalignment common with generic pulleys. Direct-fit replacement for part numbers 3926858, 3965146, and 3965147 — no machining or adapters needed Verified compatible with all major Cummins B-, IS-, QSB-, and QSL-series engines listed (including CM2350 B136C, CM2250 EC, and CM2350 B130 variants) Pre-tested for concentricity and surface hardness (HRC 48–52) to prevent premature bearing wear or belt chirping Ships from our Guangzhou warehouse in 2–5 working days — MOQ just 1 piece, ideal for urgent field repairs

In Stock · MOQ 1 pc

View Details

Fan Pulley 3914458 for Cummins ISB QSB Engines – Direct Replacement

Stop unexpected fan belt slippage and overheating on your Cummins-powered equipment — this fan pulley 3914458 delivers OEM-equivalent concentricity and surface hardness (HRC 42–46) right out of the box, so your ISB or QSB 6B5.9 engine stays cool under load without downtime. Fits 12+ Cummins engine variants including ISB CM850, QSB4.5 CM2850, and legacy B5.9 G — no guesswork on compatibility Pre-tested for runout ≤ 0.05 mm at 3,000 RPM: critical for avoiding premature bearing wear in high-hour applications Ships from our Guangzhou warehouse same day if ordered before 3 PM CST — no waiting weeks for OEM backorders Backed by XUNPO’s 6-month warranty and direct technical support from Cummins-certified parts engineers

In Stock · MOQ 1 pc

View Details

Cooling Fan Belt 6669034 for Bobcat 751–S130 Skid Steer – Heat-Resistant Serpentine Belt

Stop overheating shutdowns and keep your Bobcat running through long shifts — this heat-resistant serpentine belt delivers OEM-level durability without the wait or markup. Built for real-world skid steer abuse, it’s the Bobcat fan belt trusted by fleet managers across North America and the Middle East who can’t afford downtime from brittle or oil-swollen belts. Exact 6669034 replacement — fits Bobcat 751, 753, 763, 773, and S130 with zero tensioner adjustment needed 1005mm inner circumference + 8mm thickness — critical dimensions that prevent slippage on high-RPM cooling fans Polyester cord reinforcement + nitrile rubber compound resists heat up to 120°C and hydraulic oil exposure MOQ 1 piece, ships same day from Guangzhou warehouse — no waiting weeks for OEM backorders

In Stock · MOQ 1 pc

View Details

V-Belt 01179566 for Deutz F3L2011/F4L2011 – High-Durability Replacement

Stop unexpected downtime and costly engine stoppages—this Deutz V-belt 01179566 delivers OEM-matched grip and heat resistance for F3L2011/F4L2011 engines, even under continuous high-load operation. Direct-fit replacement for Deutz BF3L2011, BF4L2011, TD2011L04W, TCD2011L04I and 8+ other D2011-series variants — no alignment guesswork Manufactured with aramid-reinforced EPDM compound (not standard polyester cord) for 2.3× longer service life vs. budget belts in dusty, high-temp environments Ships same-day from our Guangzhou warehouse — no waiting weeks for OEM backorders or risking counterfeit imports Cross-references 0117-9566, 02235810, MT40285048 — verified against Deutz’s latest technical bulletins

In Stock · MOQ 1 pc

View Details

Upper Drive Belt 50-00178-24 for Carrier Transicold X2 & Ultra Series – High-Tensile Replacement

Stop unexpected downtime and costly service calls — this Upper Drive Belt 50-00178-24 for Carrier Transicold X2 & Ultra Series delivers OEM-matched tensile strength and heat resistance, so your refrigerated units stay online through back-to-back shifts. Fits all major Carrier Transicold models: Extra XT, Ultra XT/XTC, and full X2 line (1800, 2100, 2100A, 2100R, 2500A, 2500R) Replaces 50-00178-24, 500017824, CA-50-00178-24-AM — verified cross-reference against Carrier’s latest service bulletins Manufactured with aramid-reinforced EPDM compound — critical for resisting ozone cracking in high-humidity port and intermodal environments Ships same-day from our Guangzhou warehouse; no waiting weeks for OEM lead times or risking counterfeit belts with inconsistent pitch tolerances

In Stock · MOQ 1 pc

View Details

Drive Pump Belt 6726898 for Bobcat Loaders – Quiet, Long-Lasting Replacement

Stop downtime from noisy, slipping drive belts — this bobcat drive belt delivers quiet, slippage-free power transfer to your loader’s hydraulic pump, keeping your 773, S175, or T190 running smoothly through long shifts. Engineered with a fiber-loaded backing and extra cord support, it runs cooler and lasts longer than standard replacements — no more mid-job belt failures or costly re-tensioning. Exact OEM replacement for part number 6726898 — fits Bobcat skid steers (753–773, S130–S205) and track loaders (T140–T190) 57.4" length × 1.19" width flat cogged design with 3 precision grooves — critical for proper tension and alignment on Bobcat’s dual-pulley pump drive Advanced variable-cog profile eliminates harmonic noise and prevents belt walk under high-load hydraulic demand Great wear resistance means fewer replacements and predictable maintenance intervals — even in dusty, high-cycle rental or fleet operations

In Stock · MOQ 1 pc

View Details

Drive Belt 607400 & 603907 for Hustler Raptor SD/SDX – Heavy-Duty Replacement

Stop losing uptime to belt slippage or premature failure on your Hustler Raptor SD/SDX — this heavy-duty drive belt 607400 & 603907 delivers consistent, vibration-dampened power transfer even under full-load mowing conditions. Built with aramid-reinforced tensile cords and a heat-resistant EPDM compound, it withstands the high-RPM stress of Kawasaki FR691/FR730 and Kohler KT745 engines far longer than standard replacements. Fits both belts required for complete Raptor SD/SDX drive system replacement (607400 + 603907) Exact OEM-spec pitch, width, and angle — no alignment tweaks or tensioner recalibration needed Verified fit for 36″–60″ deck models including HTRSDS/HTRSXL series with both Kawasaki and Kohler engine variants Ships from Guangzhou warehouse in 2–5 working days — no waiting weeks for OEM backorders

In Stock · MOQ 1 pc

View Details

Drive & Starter Belt Kit for Kawasaki 13 HP EZGO RXV/TXT – OEM Replacement

Get back on the course faster with reliable, OEM-equivalent power transfer — no more unexpected stalls or belt slippage during peak operation. This Drive & Starter Belt Kit for Kawasaki 13 HP EZGO RXV/TXT – OEM Replacement delivers true fit-and-function for 2008-up RXV, TXT, and Workhorse carts equipped with the 13 HP Kawasaki engine. Includes both critical belts: starter generator belt (265-586 / 265586, 1/2" W × 35.5" OD) and drive belt (606138 / 16548G1, 1" W × 35" OD) Eliminates guesswork — pre-matched to the exact tension and deflection specs Kawasaki 13 HP clutches require Fits only genuine 13 HP Kawasaki-powered EZGO models — won’t work on Briggs, Kohler, or non-13 HP Kawasakis (a common source of costly misorders) Ready to ship same day from our Guangzhou warehouse — no waiting weeks for OEM backorders

In Stock · MOQ 1 pc

View Details