Engine Auxiliary Components

Alternator

12V Alternator 30-00423-00 for Carrier CT2/CT3 & X2 – Scheduled Maintenance

12V Alternator 30-00423-00 — compatible with Carrier CT2, CT3, Genesis, Maxima, and X2 transport refrigeration units, supporting continuous cold chain electrical charging cycles. Replacing at scheduled engine hour intervals prevents voltage instability affecting compressor clutch engagement and ECU fault codes Fits mixed fleets operating CT2-29TV, CT3-44TV, X2 2100, X2 2500R and related models sharing the same alternator platform Recommended to inspect belt drive components and battery terminals at the same service milestone Lifecycle support for aging Carrier units past thinning OEM availability, with planned replacement intervals documented per fleet duty cycle.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V 9T Starter Motor 04131602 for Deutz TCD29 – Scheduled Maintenance

04131602 Starter Motor 12V 9T for Deutz TCD29 and TCD36 engine platforms, replacement for scheduled maintenance intervals. Cranking performance degrades gradually — plan replacement before complete failure to avoid unplanned machine downtime Inspect battery condition, wiring integrity and solenoid contacts during each starter service event Stocking ahead for rental fleets and contractor yards keeps turnaround times predictable between equipment leases Fits Deutz TCD 2.9, TCD 3.6, TD 2.9, TD 3.6 applications across compact excavators, skid-steer loaders and mobile cranes. Recommended replacement timing and service interval guidance supplied with each unit for fleet-level maintenance planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Stop Solenoid 3991167 – Scheduled Maintenance for Cummins 4BT Hyundai R130

3991167 Stop Solenoid, 12V, FKM O-Ring Seal — replacement for Cummins 4BT engines in Hyundai R130 and R170 excavators. Plan replacement alongside fuel system service intervals to prevent unplanned engine run-on and cascading ECU faults across your fleet. The HV900+ nitrided plunger rod supports cycle life aligned with typical overhaul schedules, while ±0.05 mm dimensional tolerance ensures drop-in fit without linkage adjustment. Cross-reference: SA-4941-12, 3964627 (interchange reference only) Recommended replacement intervals provided with shipment for fleet maintenance planning Supports aging machines as dealer stock thins, securing long-term shutdown reliability

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

12V Stop Solenoid SBA185206083 for Shibaura – Scheduled Maintenance

12V Stop Solenoid SBA185206083 for Shibaura ISM N844, IP67 Sealed, Class H Coil — replacement for New Holland TC, Boomer, and T series tractors. Coil resistance drift and armature sticking often develop before complete failure, making this solenoid a strong candidate for preventive replacement during scheduled service intervals rather than reactive repair. Fleet operators benefit from stocking ahead given the low unit cost and high downtime consequence of unexpected run-on events. - Recommended replacement schedule aligned with your fleet maintenance plan included with shipment.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Starter Motor 132-4948 Replacement for Kubota D1105 Toro Long-Life

132-4948 Starter Motor 12V 9T — replacement for Kubota D1105 and Toro Groundsmaster turf equipment. Typical failure progression starts with sluggish solenoid engagement, then intermittent cranking, making planned swap ahead of total failure the cost-effective choice Single-unit replacement now avoids peak-season downtime; keeping one fleet spare on hand cuts swap time to minutes Linked wear on flywheel ring gear from poor meshing should be checked at each starter change Stocking guidance and replacement interval recommendation included with every shipment for fleet planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

6670727 Starter Motor Service Part for Bobcat Excavators & Loaders

Starter Motor 6670727 Replacement for Bobcat Excavators & Loaders, 12V 2.2kW, 10T CW — compatible with Bobcat 325–341, E25–E55 compact excavators and S100 loader. High-frequency start-stop cycles accelerate brush and solenoid wear; cold-crank sluggishness or abnormal current draw signals replacement timing. Proactive stocking converts unplanned downtime into scheduled maintenance windows for fleet and rental operations. Insulation Class H rated to 180°C, die-cast aluminum housing Cross-reference: SND0408, 228000-6921, 410-52186 Older Bobcat models remain supported with continuous aftermarket supply and replacement interval guidance included per shipment

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Glow Plug 185366190 TPN257 for Perkins 404D-22 – Fleet Supply

Glow Plug 185366190 TPN257, M12×1.25 Thread, Nickel-Chromium Heating Element — replacement for Perkins 404D-22, 404C-22, 104-series, FG Wilson, AKSA, JCB and Terex equipment. Tip erosion and resistance drift signal wear; replacing the full set maintains balanced cylinder heating and avoids starter stress from excessive cranking. Planned stocking of matched sets keeps fleet generators and loaders ready through cold-season duty cycles. Fits Perkins 404D-22, 404D-22T, 404C-22, 104-19, 104-22 and compatible genset/loader models OEM cross-reference: 185366092, 185366180, 185366060, 185366210, T436932 Thermal ramp to 1000°C in ≤15 sec, ceramic insulator rated 1200°C continuous Recommended replacement intervals and fleet stocking guidance supplied with shipment

In Stock · MOQ 1 pc

View Details

Alternator

12V 65A Alternator 2871A306 for Perkins 1004 1104 – Service Part

2871A306 Alternator 12V 65A — replacement for Perkins 1004, 1006, 1103, and 1104 series engines in excavators, loaders, and gensets. Swap at early signs of low-RPM output drop or bearing noise to avoid battery and starter damage; single-unit replacement restores charging without full electrical overhaul 180°C insulation and sealed double-row bearings extend service intervals in high-dust quarry and demolition environments Sustained aftermarket supply supports aging Perkins fleets past thinning brand-channel availability Replacement interval guidance included with shipment to support fleet maintenance planning.

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Glow Plug 19077-65510 Replacement for Kubota D1403-D1803 Long-Life

Glow Plug 19077-65510 replacement for Kubota D1403-D1803, 12V DC, M10×1.25 thread, reaches 1000°C within 8 seconds. Cold-start reliability degrades long before complete failure — uneven cylinder loading and fuel dilution often trace back to aging plugs. Scheduled replacement across all cylinders prevents secondary injector and ECU issues. - Fits Kubota L-series tractors, KX/U-series excavators and M-series utility machines Heat-treated carbon steel body with nickel-chromium heating element Supplied with recommended replacement intervals for fleet-level maintenance planning

In Stock · MOQ 1 pc

View Details

Alternator

Alternator AM877557 for Yanmar 3TNE74 – Scheduled Maintenance

AM877557 Alternator 12V 20A — replacement for Yanmar 3TNE74, John Deere 2210/2320/2520 and compatible compact tractors. Bearing wear and diode thermal degradation typically cause voltage ripple before outright failure, making this part a strong candidate for scheduled lifecycle replacement rather than run-to-failure. Replacing the alternator assembly alone restores charging without overhauling the full electrical system when stator and rotor remain within tolerance. Recommended service intervals included with shipment for long-term fleet planning.

In Stock · MOQ 1 pc

View Details

Cushion Damper

Rubber Buffer 06129901/06129902 | Service Part for Bomag Vibratory Rollers

Rubber Buffer 06129901/06129902 — Cushion Damper for Bomag Vibratory Rollers, Shore A 60±3 — replacement for vibratory roller isolation mounts that degrade under continuous oscillation. Typical wear signs include surface cracking, permanent compression set, and increased frame resonance; scheduled replacement protects vibratory shafts, motor brackets, and hydraulic components from secondary stress damage. UV and ozone stabilizers extend service intervals in tropical and coastal environments. Compatible with Bomag BW90 through BW284 AD series rollers Cross-reference: 06129901, 06129902 (reference only) Recommended inspection every 500 operating hours or annually Older BW models remain in active supply for fleet continuity

In Stock · MOQ 1 pc

View Details

Engine Auxiliary Components

Fuel Shut-Off Solenoid AM882277 for John Deere 670-1070 – Service Part

AM882277 Fuel Shut-Off Solenoid 12V DC, <35 ms Response Time — compatible with John Deere 670, 770, 870, 970, and 1070 compact utility tractors as a planned service part. Class H insulation handles continuous duty and seasonal thermal cycling, while NBR O-ring seals meet SAE J2044 diesel compatibility for extended intervals. Stocking this solenoid before failure turns reactive downtime into a quick scheduled swap during pre-season fleet maintenance. Cross-reference: AM876416, P610-C5V12 (interchange reference only) Replacement interval guidance supplied with shipment for your maintenance planning

In Stock · MOQ 1 pc

View Details