447 Products Available

Engine Auxiliary Components

Quality aftermarket parts for CAT, Komatsu, Hitachi, Volvo, Hyundai & more. MOQ 1 piece -- ships in 2-5 days.

Get a Quote WhatsApp

Showing 73-84 of 447 products

MOQ 1 Piece Ships 2-5 Days

12V Alternator A187873 for CASE – Fleet Supply Replacement

A187873 12V Alternator, Class H Insulation — replacement for CASE backhoe loaders, excavators, dozers, and tractors including 580K, 580SM, 170C, and 220B models. Bearing degradation and voltage regulator drift are typical failure modes over extended service hours, making proactive stocking practical for fleet maintenance planning across machines sharing engine models 4390, 4391, 6590, and PX170. Compatible with cross-reference numbers A186125, 3604448R, and J920679. Recommended replacement intervals and lifecycle guidance supplied with shipment for fleet-level maintenance scheduling.

In Stock · MOQ 1 pc
View Details

Shutoff Solenoid Valve 6681513 – Scheduled Maintenance for Bobcat Skid Steer

12V Stop Solenoid Valve 6681513 — compatible with Bobcat skid steer loaders 751, 753, 763, S150, S185 and excavators 325, 331, 337 (cross-reference only). Class H insulation (180°C) and Viton O-ring seals handle high-heat duty cycles in mining and demolition environments Typical replacement trigger: erratic engine shutdown, run-on after key-off, or intermittent solenoid click during scheduled maintenance intervals Replacement cycle recommendations based on your fleet's operating hours and environment are included with every shipment

In Stock · MOQ 1 pc
View Details

Glow Plug 3974953 for Kubota D1402 – Service Part

Glow Plug 3974953, NiCr80/20 Heating Element, AISI 4140 Steel Body — replacement for Kubota D1402, V1702 and Bobcat 643, 743 series engines. Scheduled replacement before winter prevents cold-start failures on site; when one plug fails, the remaining units are typically near end-of-life — replace as a matched set to avoid repeat service calls Pair with fuel filter and air filter service for a complete cold-season prep cycle across your fleet Legacy Kubota and Bobcat platforms remain in continuous supply, supporting older machines past thinning OEM support

In Stock · MOQ 1 pc
View Details

Starter Motor 25-098-11 | Overhaul Grade for Kohler CH CV Engines

Starter Motor 25-098-11 for Kohler CH/CV Engines, 12V, 0.8 kW, 10-Tooth Pinion — planned service replacement for Kohler-powered construction generators, agricultural units, and compact equipment fleets. Proactive swap at defined engine-hour intervals prevents unscheduled downtime from solenoid coil degradation and brush depletion Supports aging CH620–CH1000 and CV624–CV730 platforms with verified aftermarket supply and ISO 9001 production standards Early cranking hesitation signals allow scheduled changeover before complete failure Replacement cycle recommendations ship with each order to support fleet maintenance planning.

In Stock · MOQ 1 pc
View Details

12V 1.2KW Starter Motor for Kubota D902 – Fleet Supply

16824-63013 Starter Motor, 12V 1.2kW, 8-Tooth Pinion — replacement for Kubota D902, D902E and D902-E2B engines in compact excavators, rice harvesters and generator sets. Plan proactive replacement at early signs of slow cranking or gear mesh noise, avoiding compounding downtime across fleet units Single-component swap is typically sufficient; inspect flywheel ring gear and solenoid contacts during service to prevent repeat failures Stocking ahead for multi-unit fleets reduces emergency procurement and keeps equipment turnaround predictable Long-term supply commitment for aging D902 variants, with parts and complete machines available from one account.

In Stock · MOQ 1 pc
View Details

Stop Solenoid D610-B1V12 for Kubota WG750 DF752 – Service Part

Stop Solenoid D610-B1V12 for Kubota WG750 / DF752, 12V DC Dual Coil — replacement for engines in compact construction and agricultural equipment with frequent restart cycles. Treat this solenoid as a scheduled wear item: sluggish shut-off response, intermittent engagement under voltage drop, or visible contact arcing after high-cycle use all signal replacement before unplanned downtime hits your fleet. Fits Kubota WG750, DF752, DF-750, DF972, D905 Dual coil (pull-in + hold-in), 2-terminal, IP54 rated MOQ 1 piece, 6-month warranty against manufacturing defects Replacement interval guidance aligned with actual cycle counts ships with every order.

In Stock · MOQ 1 pc
View Details

Recoil Pull Starter Replacement for Stihl MS194T Long-Life

Recoil Starter 1137-080-2115 for Stihl MS194T — compatible replacement with reinforced PA66+GF25 housing and braided Dyneema pull cord, rated for 5,000+ pull cycles across a -20°C to +70°C operating range. Signs like cord fraying, sluggish retraction, or loss of spring tension signal replacement timing before full failure shuts down a saw Replace the cord and spring individually when the housing and pulley remain sound, or swap the full assembly when cracks appear ISO 9001 production under our 6-month warranty, and we confirm recommended replacement intervals with every shipment so your fleet maintenance schedule stays on track

In Stock · MOQ 1 pc
View Details

Wear Item Vibration Mount Compatible with Yanmar 3.95 Thermo King

91-2281 Cushion Damper, Shore A 55±3, 82 mm OD — compatible with Thermo King TS-200, TS-300, KD-II, MD-II, RD-II, TD-II, Super TD-II and McTRK-II refrigeration units with Yanmar 3.95 engine. Typical wear signs include rubber hardening, cracking and rebound loss, which accelerate compressor bracket fatigue and high-pressure hose leakage Replacing dampers at scheduled intervals prevents misalignment damage to adjacent bearings and piping across the refrigeration assembly Older Thermo King models remain supported with verified aftermarket fitment for ongoing fleet serviceability

In Stock · MOQ 1 pc
View Details

12V 14A Alternator for Kubota B-Series – Scheduled Maintenance

15531-64017 Alternator, 12V 14A — compatible with Kubota B-Series, BX, G, and ZD compact tractors. Anodized die-cast aluminum housing with Class H insulation rated to 180°C for sustained heat resistance during continuous PTO operation. Plan alternator replacement at first signs of dim lights or slow cranking to avoid battery cascade damage Pair with drive belt and battery terminal service for full charging-system refresh across aging fleet units Sustained aftermarket supply supports lifecycle extension on older B-Series models as brand-direct availability declines Replacement interval guidance included with shipment to support fleet-level maintenance scheduling.

In Stock · MOQ 1 pc
View Details

ISO-Certified

Quality Assured

2-5 Day Ship

In-stock Items

3-12 Mo Warranty

All Parts Covered

24H Quotation

Fast Response